diff --git a/keyboard/atomic/Makefile b/keyboard/atomic/Makefile
index 364efa3f..1203cf6a 100644
--- a/keyboard/atomic/Makefile
+++ b/keyboard/atomic/Makefile
@@ -38,31 +38,9 @@
 # To rebuild project do "make clean" then "make all".
 #----------------------------------------------------------------------------
 
-# Build Options
-#   change to "no" to disable the options, or define them in the makefile.mk in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = yes     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  = yes     # Mouse keys(+4700)
-EXTRAKEY_ENABLE  = yes     # Audio control and System control(+450)
-CONSOLE_ENABLE   = yes     # Console for debug(+400)
-COMMAND_ENABLE   = yes     # Commands for debug and configuration
-NKRO_ENABLE      = no      # USB Nkey Rollover - if this doesn't work, see here:
-                           # https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes     # Enable keyboard backlight functionality
-MIDI_ENABLE      = no      # MIDI controls
-AUDIO_ENABLE     = no      # Audio output on port C6
-UNICODE_ENABLE   = no      # Unicode
-BLUETOOTH_ENABLE = no      # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE  = no      # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
 # Target file name (without extension).
 TARGET = atomic
 
-
 # Directory common source filess exist
 TOP_DIR = ../..
 TMK_DIR = ../../tmk_core
@@ -73,6 +51,8 @@ TARGET_DIR = .
 # # project specific files
 SRC = atomic.c
 
+CONFIG_H = config.h
+
 ifdef keymap
 	KEYMAP = $(keymap)
 endif
@@ -88,7 +68,7 @@ ifneq ("$(wildcard keymaps/$(KEYMAP)/makefile.mk)","")
 endif
 else
 $(error Keymap file does not exist)
-endif
+endif 
 endif
 
 else
@@ -107,8 +87,6 @@ endif
 
 SRC := $(KEYMAP_FILE) $(SRC)
 
-CONFIG_H = config.h
-
 # MCU name
 #MCU = at90usb1287
 MCU = atmega32u4
@@ -126,7 +104,6 @@ MCU = atmega32u4
 #     software delays.
 F_CPU = 16000000
 
-
 #
 # LUFA specific
 #
@@ -158,11 +135,45 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   USBaspLoader     2048
 OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
+# Build Options
+#   change to "no" to disable the options, or define them in the makefile.mk in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifdef KEYMAP
+
+ifeq ("$(wildcard keymaps/$(KEYMAP).c)","")
+ifneq ("$(wildcard keymaps/$(KEYMAP)/makefile.mk)","")
+	include keymaps/$(KEYMAP)/makefile.mk
+endif 
+endif
+
+else
+
+ifneq ("$(wildcard keymaps/default/makefile.mk)","")
+	include keymaps/default/makefile.mk
+endif
 
-ifeq ($(BACKLIGHT_ENABLE), yes)
-	SRC += backlight.c
 endif
 
+ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
+	SRC := backlight.c $(SRC)
+endif
 
 # Optimize size but this may cause error "relocation truncated to fit"
 #EXTRALDFLAGS = -Wl,--relax
diff --git a/keyboard/atomic/keymaps/pvc/config.h b/keyboard/atomic/keymaps/pvc/config.h
new file mode 100644
index 00000000..8449fa06
--- /dev/null
+++ b/keyboard/atomic/keymaps/pvc/config.h
@@ -0,0 +1,157 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Ortholinear Keyboards
+#define PRODUCT         The Atomic Keyboard
+#define DESCRIPTION     A compact ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/ 
+#define COLS (int []){ F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7, D3, D2, D1 }
+#define ROWS (int []){ D0, D5, B5, B6, B3 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE    5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* 
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved 
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is 
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is 
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+#define MAGIC_KEY_BOOTLOADER       B
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboard/atomic/keymaps/pvc/pvc_atomic.c b/keyboard/atomic/keymaps/pvc/keymap.c
similarity index 59%
rename from keyboard/atomic/keymaps/pvc/pvc_atomic.c
rename to keyboard/atomic/keymaps/pvc/keymap.c
index 3ddd3e32..627f57ff 100644
--- a/keyboard/atomic/keymaps/pvc/pvc_atomic.c
+++ b/keyboard/atomic/keymaps/pvc/keymap.c
@@ -1,12 +1,19 @@
 #include "atomic.h"
 #include "action_layer.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
 
 #define _QW 0
 #define _LW 1
 #define _RS 2
 #define _FN 3
-#define _F1 4
-#define _F2 5
+
+#define M_QW 0
+#define M_LW 1
+#define M_RS 2
+#define M_FN 3
+
 
 #define _______ KC_TRNS
 #define ___T___ KC_TRNS
@@ -32,7 +39,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   { KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL   },
   { KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  XXXXXXX, KC_PGUP  },
   { KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, XXXXXXX, KC_UP,   KC_PGDN  },
-  { KC_LCTL, KC_LGUI, M(_FN),  KC_LALT, M(_RS),  KC_SPC,  XXXXXXX, M(_LW),  KC_RALT, KC_HOME, KC_END,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT  },
+  { KC_LCTL, KC_LGUI, M(M_FN), KC_LALT, M(M_RS), KC_SPC,  XXXXXXX, M(M_LW), KC_RALT, KC_HOME, KC_END,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT  },
  },
  [_LW] = { /* LOWERED */
   { KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  ___T___, ___T___  },
@@ -55,29 +62,50 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ___T___, ___T___, KC_MS_U, KC_WH_D  },
   { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R  },
  },
- [_F1] = { /* FUNCTION */
-  { KC_NLCK, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  ___T___, ___T___  },
-  { KC_SLCK, KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24,  KC_PAUS, KC_PSCR  },
-  { KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U  },
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ___T___, ___T___, KC_MS_U, KC_WH_D  },
-  { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R  },
- },
- [_F2] = { /* FUNCTION */
-  { KC_NLCK, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  ___T___, ___T___  },
-  { KC_SLCK, KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24,  KC_PAUS, KC_PSCR  },
-  { KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U  },
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ___T___, ___T___, KC_MS_U, KC_WH_D  },
-  { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R  },
- },
 };
 
 #define IS_LAYER_ON(layer)  ((layer_state) & (1<<(layer)))
 #define IS_LAYER_OFF(layer) ((!layer_state) & (1<<(layer)))
 
+
+#ifdef AUDIO_ENABLE
+float tone_lw[][2] = {
+  {440.0*pow(2.0,(59)/12.0), 8},
+  {440.0*pow(2.0,(60)/12.0), 8},
+  {0, 4},
+  {440.0*pow(2.0,(67)/12.0), 16}
+};
+
+float tone_rs[][2] = {
+  {440.0*pow(2.0,(59)/12.0), 8},
+  {440.0*pow(2.0,(60)/12.0), 8},
+  {0, 4},
+  {440.0*pow(2.0,(67)/12.0), 16},
+  {0, 4},
+  {440.0*pow(2.0,(71)/12.0), 16}
+};
+
+float tone_fn[][2] = {
+  {440.0*pow(2.0,(59)/12.0), 8},
+  {440.0*pow(2.0,(60)/12.0), 8},
+  {0, 4},
+  {440.0*pow(2.0,(67)/12.0), 16},
+  {0, 4},
+  {440.0*pow(2.0,(69)/12.0), 16},
+  {0, 4},
+  {440.0*pow(2.0,(67)/12.0), 16}
+};
+#endif
+
+
 void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3)
 {
 	if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2))
 	{
+            #ifdef AUDIO_ENABLE
+              println("PlayNotes FN");
+              play_notes(&tone_fn, 8, false);
+            #endif
 		layer_on(layer3);
 	}
 	else
@@ -114,37 +142,6 @@ void update_quad_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3, uint8_t l
 	}
 }
 
-/* ignore me
-void change_quad_layer(uint8_t focus_layer, bool desired_focus_layer_state, uint8_t pair_layer, uint8_t layer3, uint8_t layer4)
-{
-	
-	// If desired focus layer state == 1 and current focus layer state == 1	
-	if ((desired_focus_layer_state) && IS_LAYER_ON(layer1))
-	{
-		// Do Nothing
-	}
-	// If desired focus layer state == 0 and current focus layer state == 1	
-	else if ((desired_focus_layer_state) && IS_LAYER_ON(layer1))
-	{
-		// If 
-	    layer_off(layer3);
-	    layer_off(layer4);
-	}
-	}
-	else
-	{
-		if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2))
-		{
-			layer_on(layer4);
-		}
-		else
-		{
-			layer_off(layer3);
-		    layer_off(layer4);
-		}
-	}
-}
-*/
 
 const uint16_t PROGMEM fn_actions[] = {
 };
@@ -152,70 +149,54 @@ const uint16_t PROGMEM fn_actions[] = {
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
-	
-	// MACRODOWN only works in this function
-	switch(id)
-	{
-		case _FN:
-			if (record->event.pressed) {
-				print("FN_DN\n");
-				print_val_bin32(layer_state);
-				layer_on(_FN);
-				print_val_bin32(layer_state);
-			} else {
-				print("FN_UP\n");
-				print_val_bin32(layer_state);
-				layer_off(_FN);
-				print_val_bin32(layer_state);
-			}
-			break;
-
-		case _RS:
-			if (record->event.pressed) {
-				print("RS_DN\n");
-				print_val_bin32(layer_state);
-				layer_on(_RS);
-				//tri_layer++;
-				print_val_bin32(layer_state);
-				//update_tri_layer(_RS, _LW, _FN);
-				update_quad_layer(_RS, _LW, _F1, _F2, 0);
-				print_val_bin32(layer_state);
-			} else {
-				print("RS_UP\n");
-				print_val_bin32(layer_state);
-				layer_off(_RS);
-				//tri_layer--;
-				print_val_bin32(layer_state);
-				//update_tri_layer(_RS, _LW, _FN);
-				update_quad_layer(_RS, _LW, _F1, _F2, 0);
-				print_val_bin32(layer_state);
-			}
-			break;
-
-		case _LW:
-			if (record->event.pressed) {
-				print("LW_DN\n");
-				print_val_bin32(layer_state);
-				layer_on(_LW);
-				//tri_layer++;
-				print_val_bin32(layer_state);
-				//update_tri_layer(_RS, _LW, _FN);
-				update_quad_layer(_RS, _LW, _F1, _F2, 1);
-				print_val_bin32(layer_state);
-			} else {
-				print("LW_UP\n");
-				print_val_bin32(layer_state);
-				layer_off(_LW);
-				//tri_layer--;
-				print_val_bin32(layer_state);
-				//update_tri_layer(_RS, _LW, _FN);
-				update_quad_layer(_RS, _LW, _F1, _F2, 1);
-				print_val_bin32(layer_state);
-			}
-			break;
-
+  // MACRODOWN only works in this function
+      switch(id) {
+        case M_LW:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              println("PlayNotes LW");
+              play_notes(&tone_lw, 4, false);
+            #endif
+            layer_on(_LW);
+            update_tri_layer(_LW, _RS, _FN);
+          } else {
+            layer_off(_LW);
+            update_tri_layer(_LW, _RS, _FN);
+          }
+          break;
+        case M_RS:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              println("PlayNotes RS");
+              play_notes(&tone_rs, 6, false);
+            #endif
+            layer_on(_RS);
+            update_tri_layer(_LW, _RS, _FN);
+          } else {
+            layer_off(_RS);
+            update_tri_layer(_LW, _RS, _FN);
+          }
+          break;
 		default:
-			break;
-	}
-	return MACRO_NONE;
+        	break;
+      }
+    return MACRO_NONE;
+};
+
+#ifdef AUDIO_ENABLE
+float start_up[][2] = {
+  {440.0*pow(2.0,(67)/12.0), 12},
+  {440.0*pow(2.0,(64)/12.0), 8},
+  {440.0*pow(2.0,(55)/12.0), 8},
+  {440.0*pow(2.0,(60)/12.0), 8},
+  {440.0*pow(2.0,(64)/12.0), 20}
 };
+#endif
+
+void matrix_init_user(void) {
+  #ifdef AUDIO_ENABLE
+    init_notes();
+    play_notes(&start_up, 5, false);
+    println("Matrix Init");
+  #endif
+}
diff --git a/keyboard/atomic/keymaps/pvc/makefile.mk b/keyboard/atomic/keymaps/pvc/makefile.mk
index ff0a9c33..c41102f5 100644
--- a/keyboard/atomic/keymaps/pvc/makefile.mk
+++ b/keyboard/atomic/keymaps/pvc/makefile.mk
@@ -1,16 +1,18 @@
 BOOTMAGIC_ENABLE = yes     # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE  = yes     # Mouse keys(+4700)
 EXTRAKEY_ENABLE  = yes     # Audio control and System control(+450)
-CONSOLE_ENABLE   = no      # Console for debug(+400)
+CONSOLE_ENABLE   = yes     # Console for debug(+400)
 COMMAND_ENABLE   = yes     # Commands for debug and configuration
 NKRO_ENABLE      = yes     # USB Nkey Rollover - if this doesn't work, see here:
                            # https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
 MIDI_ENABLE      = no      # MIDI controls
-AUDIO_ENABLE     = no      # Audio output on port C6
+AUDIO_ENABLE     = yes     # Audio output on port C6
 UNICODE_ENABLE   = no      # Unicode
 BLUETOOTH_ENABLE = no      # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE  = no      # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+CONFIG_H = keymaps/$(KEYMAP)/config.h
\ No newline at end of file
diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile
index c8517e75..83b8303b 100644
--- a/keyboard/planck/Makefile
+++ b/keyboard/planck/Makefile
@@ -157,39 +157,10 @@ SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 ifdef KEYMAP
 
-<<<<<<< HEAD
-<<<<<<< HEAD
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE = yes    # Enable keyboard backlight functionality
-# MIDI_ENABLE = yes         # MIDI controls
-# AUDIO_ENABLE = yes        # Audio output on port C6
-# UNICODE_ENABLE = yes      # Unicode
-# BLUETOOTH_ENABLE = ye     # Enable Bluetooth with the Adafruit EZ-Key HID
-# RGBLIGHT_ENABLE = yes     # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-#SLEEP_LED_ENABLE = yes    # Breathing sleep LED during USB suspend
-
-
-ifdef BACKLIGHT_ENABLE
-=======
-ifeq ($(BACKLIGHT_ENABLE), yes)
->>>>>>> master
-	SRC += backlight.c
-=======
 ifeq ("$(wildcard keymaps/$(KEYMAP).c)","")
 ifneq ("$(wildcard keymaps/$(KEYMAP)/makefile.mk)","")
 	include keymaps/$(KEYMAP)/makefile.mk
 endif 
->>>>>>> remotes/jackhumbert/new_defaults
 endif
 
 else
@@ -212,4 +183,4 @@ VPATH += $(TARGET_DIR)
 VPATH += $(TOP_DIR)
 VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/quantum/quantum.mk
+include $(TOP_DIR)/quantum/quantum.mk
\ No newline at end of file
diff --git a/quantum/audio.h b/quantum/audio.h
index 99203cea..31f9a357 100644
--- a/quantum/audio.h
+++ b/quantum/audio.h
@@ -6,6 +6,6 @@
 void play_sample(uint8_t * s, uint16_t l, bool r);
 void play_note(double freq, int vol);
 void stop_note(double freq);
-void stop_all_notes();
-void init_notes();
+void stop_all_notes(void);
+void init_notes(void);
 void play_notes(float (*np)[][2], uint8_t n_length, bool n_repeat);
\ No newline at end of file