Merge remote-tracking branch 'upstream/master'
@ -1,63 +0,0 @@
|
||||
|
||||
#include <avr/io.h>
|
||||
#include "backlight.h"
|
||||
#include "atomic.h"
|
||||
|
||||
|
||||
#define CHANNEL OCR1C
|
||||
|
||||
void backlight_init_ports()
|
||||
{
|
||||
|
||||
// Setup PB7 as output and output low.
|
||||
DDRB |= (1<<7);
|
||||
PORTB &= ~(1<<7);
|
||||
|
||||
// Use full 16-bit resolution.
|
||||
ICR1 = 0xFFFF;
|
||||
|
||||
// I could write a wall of text here to explain... but TL;DW
|
||||
// Go read the ATmega32u4 datasheet.
|
||||
// And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
|
||||
|
||||
// Pin PB7 = OCR1C (Timer 1, Channel C)
|
||||
// Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
|
||||
// (i.e. start high, go low when counter matches.)
|
||||
// WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
|
||||
// Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
|
||||
|
||||
TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
|
||||
TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
|
||||
|
||||
backlight_init();
|
||||
}
|
||||
|
||||
void backlight_set(uint8_t level)
|
||||
{
|
||||
if ( level == 0 )
|
||||
{
|
||||
// Turn off PWM control on PB7, revert to output low.
|
||||
TCCR1A &= ~(_BV(COM1C1));
|
||||
CHANNEL = 0x0;
|
||||
// Prevent backlight blink on lowest level
|
||||
PORTB &= ~(_BV(PORTB7));
|
||||
}
|
||||
else if ( level == BACKLIGHT_LEVELS )
|
||||
{
|
||||
// Prevent backlight blink on lowest level
|
||||
PORTB &= ~(_BV(PORTB7));
|
||||
// Turn on PWM control of PB7
|
||||
TCCR1A |= _BV(COM1C1);
|
||||
// Set the brightness
|
||||
CHANNEL = 0xFFFF;
|
||||
}
|
||||
else
|
||||
{
|
||||
// Prevent backlight blink on lowest level
|
||||
PORTB &= ~(_BV(PORTB7));
|
||||
// Turn on PWM control of PB7
|
||||
TCCR1A |= _BV(COM1C1);
|
||||
// Set the brightness
|
||||
CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
|
||||
}
|
||||
}
|
@ -0,0 +1,137 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = clueboard1
|
||||
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
TMK_DIR = ../../tmk_core
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# # project specific files
|
||||
SRC = clueboard1.c \
|
||||
led.c
|
||||
|
||||
ifdef KEYMAP
|
||||
SRC := keymaps/keymap_$(KEYMAP).c $(SRC)
|
||||
else
|
||||
SRC := keymaps/keymap_default.c $(SRC)
|
||||
endif
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
AUDIO_ENABLE = no
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
|
||||
# Optimize size but this may cause error "relocation truncated to fit"
|
||||
#EXTRALDFLAGS = -Wl,--relax
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
VPATH += $(TMK_DIR)
|
||||
|
||||
include $(TOP_DIR)/quantum/quantum.mk
|
@ -0,0 +1,23 @@
|
||||
#include "clueboard1.h"
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_user(void) {
|
||||
// leave these blank
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
// leave these blank
|
||||
}
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
rgblight_init();
|
||||
#endif
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
matrix_scan_user();
|
||||
}
|
@ -0,0 +1,52 @@
|
||||
#ifndef CLUEBOARD1_H
|
||||
#define CLUEBOARD1_H
|
||||
|
||||
#include "matrix.h"
|
||||
#include "keymap_common.h"
|
||||
#include <stddef.h>
|
||||
|
||||
|
||||
/* Clueboard matrix layout
|
||||
* ,-----------------------------------------------------------. ,---.
|
||||
* | 00| 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| | 0F|
|
||||
* |-----------------------------------------------------------| |---|
|
||||
* | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C| 1D| | 1F|
|
||||
* |-----------------------------------------------------------| `---'
|
||||
* | 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 2A| 2B| 2C| 2D|
|
||||
* |------------------------------------------------------------.
|
||||
* | 30| 31| 32| 33| 34| 35| 36| 37| 38| 39| 3A| 3B| 3C| 3D|3E|
|
||||
* |------------------------------------------------------------------.
|
||||
* | 40| 41| 42| 43| 45| 46| 49| 4A| 4B| 4C| 4D| 4E| 4F|
|
||||
* `------------------------------------------------------------------'
|
||||
* ,-----------------------------------------------------------. ,---.
|
||||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Yen| BS| |Ins|
|
||||
* |-----------------------------------------------------------| |---|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|
|
||||
* |-----------------------------------------------------------| `---'
|
||||
* |Caps | A| S| D| F| G| H| J| k| L| ;| '| # | Ent|
|
||||
* |--------------------------------------------------------------.
|
||||
* |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up|
|
||||
* |------------------------------------------------------------------.
|
||||
* |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl| Fn|Left|Down|Rgt|
|
||||
* `------------------------------------------------------------------'
|
||||
*/
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
|
||||
k40, k41, k42, k43, k45, k46, k49, k4A, k4B, k4C, k4D, k4E, k4F \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO, k1F }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \
|
||||
{ k40, k41, k42, k43, KC_NO, k45, k46, KC_NO, KC_NO, k49, k4A, k4B, k4C, k4D, k4E, k4F } \
|
||||
}
|
||||
|
||||
void matrix_init_user(void);
|
||||
void matrix_scan_user(void);
|
||||
|
||||
#endif
|
@ -0,0 +1,96 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xC1ED
|
||||
#define PRODUCT_ID 0x2301
|
||||
#define DEVICE_VER 0x0003
|
||||
#define MANUFACTURER Clueboard
|
||||
#define PRODUCT Clueboard
|
||||
#define DESCRIPTION QMK keyboard firmware for Clueboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 16
|
||||
|
||||
// COLS: Left to right, ROWS: Top to bottom
|
||||
|
||||
/* Column pin configuration
|
||||
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
||||
* pin: B3 F1 F4 F5 F6 C7 C6 B6 B5 B4 D7 D6 D4 F7 B0 B1
|
||||
*/
|
||||
#define COLS (int []){ B3, F1, F4, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, F7, B0, B1 }
|
||||
|
||||
/* Row pin configuration
|
||||
* row: 0 1 2 3 4
|
||||
* pin: D1 D0 D2 D5 D3
|
||||
*/
|
||||
#define ROWS (int []){ D1, D0, D2, D5, D3 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* Underlight configuration
|
||||
*/
|
||||
#define ws2812_PORTREG PORTB
|
||||
#define ws2812_DDRREG DDRB
|
||||
#define ws2812_pin 2
|
||||
#define RGBLED_NUM 14 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
@ -0,0 +1,184 @@
|
||||
#include "clueboard1.h"
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
#include "rgblight.h"
|
||||
#endif
|
||||
|
||||
// Used for SHIFT_ESC
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _RS 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: (Base Layer) Default Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | |PGUP|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL|HOME|PGDN| END|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END),
|
||||
|
||||
/* Keymap _RS: Reset layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | | | | | | | | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | |RESET| | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL| | | |
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RS] = KEYMAP(
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(1), F(7), \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(8), \
|
||||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), F(5), \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, F(2), F(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(4), F(6), F(3)),
|
||||
#else
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
#endif
|
||||
};
|
||||
|
||||
enum function_id {
|
||||
SHIFT_ESC,
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
RGBLED_TOGGLE,
|
||||
RGBLED_STEP_MODE,
|
||||
RGBLED_INCREASE_HUE,
|
||||
RGBLED_DECREASE_HUE,
|
||||
RGBLED_INCREASE_SAT,
|
||||
RGBLED_DECREASE_SAT,
|
||||
RGBLED_INCREASE_VAL,
|
||||
RGBLED_DECREASE_VAL
|
||||
#endif
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(SHIFT_ESC),
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
[1] = ACTION_FUNCTION(RGBLED_TOGGLE),
|
||||
[2] = ACTION_FUNCTION(RGBLED_STEP_MODE),
|
||||
[3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
|
||||
[4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
|
||||
[5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
|
||||
[6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
|
||||
[7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
|
||||
[8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
|
||||
#endif
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t shift_esc_shift_mask;
|
||||
switch (id) {
|
||||
case SHIFT_ESC:
|
||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
|
||||
if (record->event.pressed) {
|
||||
if (shift_esc_shift_mask) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
add_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
if (shift_esc_shift_mask) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
del_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
}
|
||||
break;
|
||||
//led operations
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
case RGBLED_TOGGLE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_toggle();
|
||||
}
|
||||
|
||||
break;
|
||||
case RGBLED_INCREASE_HUE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_hue();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_HUE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_hue();
|
||||
}
|
||||
break;
|
||||
case RGBLED_INCREASE_SAT:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_sat();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_SAT:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_sat();
|
||||
}
|
||||
break;
|
||||
case RGBLED_INCREASE_VAL:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_val();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_VAL:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_val();
|
||||
}
|
||||
break;
|
||||
case RGBLED_STEP_MODE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_step();
|
||||
}
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
}
|
@ -0,0 +1,32 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include "stdint.h"
|
||||
#include "led.h"
|
||||
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
DDRF |= (1<<0);
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
PORTF |= (1<<0);
|
||||
} else {
|
||||
// Turn capslock off
|
||||
PORTF &= ~(1<<0);
|
||||
}
|
||||
}
|
@ -0,0 +1,141 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = clueboard2
|
||||
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
TMK_DIR = ../../tmk_core
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# # project specific files
|
||||
SRC = clueboard2.c led.c
|
||||
|
||||
ifdef KEYMAP
|
||||
SRC := keymaps/keymap_$(KEYMAP).c $(SRC)
|
||||
else
|
||||
SRC := keymaps/keymap_default.c $(SRC)
|
||||
endif
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
SRC := backlight.c $(SRC)
|
||||
#endif
|
||||
|
||||
# Optimize size but this may cause error "relocation truncated to fit"
|
||||
#EXTRALDFLAGS = -Wl,--relax
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
VPATH += $(TMK_DIR)
|
||||
|
||||
include $(TOP_DIR)/quantum/quantum.mk
|
@ -0,0 +1,41 @@
|
||||
|
||||
#include <avr/io.h>
|
||||
#include "backlight.h"
|
||||
#include "print.h"
|
||||
|
||||
/* Clueboard 2.0 LED locations:
|
||||
*
|
||||
* Capslock: B4, pull high to turn on
|
||||
* LCtrl: Shared with Capslock, DO NOT INSTALL LED'S IN BOTH
|
||||
* Page Up: B7, pull high to turn on
|
||||
* Escape: D6, pull high to turn on
|
||||
* Arrows: D4, pull high to turn on
|
||||
*/
|
||||
|
||||
void init_backlight_pin(void) {
|
||||
print("init_backlight_pin()\n");
|
||||
// Set our LED pins as output
|
||||
DDRD |= (1<<6); // Esc
|
||||
DDRB |= (1<<7); // Page Up
|
||||
DDRD |= (1<<4); // Arrows
|
||||
|
||||
// Set our LED pins low
|
||||
PORTD &= ~(1<<6); // Esc
|
||||
PORTB &= ~(1<<7); // Page Up
|
||||
PORTD &= ~(1<<4); // Arrows
|
||||
}
|
||||
|
||||
void backlight_set(uint8_t level) {
|
||||
if ( level == 0 ) {
|
||||
// Turn off light
|
||||
PORTD |= (1<<6); // Esc
|
||||
PORTB |= (1<<7); // Page Up
|
||||
PORTD |= (1<<4); // Arrows
|
||||
} else {
|
||||
// Turn on light
|
||||
PORTD &= ~(1<<6); // Esc
|
||||
PORTB &= ~(1<<7); // Page Up
|
||||
PORTD &= ~(1<<4); // Arrows
|
||||
}
|
||||
}
|
||||
|
@ -0,0 +1,44 @@
|
||||
#include "clueboard2.h"
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
#include "backlight.h"
|
||||
#endif
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_user(void) {
|
||||
// leave these blank
|
||||
};
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
// leave these blank
|
||||
};
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
if (matrix_init_user) {
|
||||
(*matrix_init_user)();
|
||||
}
|
||||
led_init_ports();
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
init_backlight_pin();
|
||||
#endif
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
rgblight_init();
|
||||
#endif
|
||||
|
||||
// JTAG disable for PORT F. write JTD bit twice within four cycles.
|
||||
MCUCR |= (1<<JTD);
|
||||
MCUCR |= (1<<JTD);
|
||||
};
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
if (matrix_scan_user) {
|
||||
(*matrix_scan_user)();
|
||||
}
|
||||
};
|
@ -0,0 +1,57 @@
|
||||
#ifndef CLUEBOARD2_H
|
||||
#define CLUEBOARD2_H
|
||||
|
||||
#include "matrix.h"
|
||||
#include "keymap_common.h"
|
||||
#include <stddef.h>
|
||||
|
||||
|
||||
/* Clueboard matrix layout
|
||||
* ,-----------------------------------------------------------. ,---.
|
||||
* | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 55| 56| | 57|
|
||||
* |-----------------------------------------------------------| |---|
|
||||
* | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67|
|
||||
* |-----------------------------------------------------------| `---'
|
||||
* | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 74| 75|
|
||||
* |------------------------------------------------------------.
|
||||
* | 30| 31| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 84| 85|86|
|
||||
* |------------------------------------------------------------------.
|
||||
* | 40| 41| 42| 43| 45| 46| 90| 91| 92| 93| 94| 95| 96|
|
||||
* `------------------------------------------------------------------'
|
||||
* ,-----------------------------------------------------------. ,---.
|
||||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Yen| BS| |Ins|
|
||||
* |-----------------------------------------------------------| |---|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|
|
||||
* |-----------------------------------------------------------| `---'
|
||||
* |Caps | A| S| D| F| G| H| J| k| L| ;| '| # | Ent|
|
||||
* |--------------------------------------------------------------.
|
||||
* |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up|
|
||||
* |------------------------------------------------------------------.
|
||||
* |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl| Fn|Left|Down|Rgt|
|
||||
* `------------------------------------------------------------------'
|
||||
*/
|
||||
// The first section contains all of the arguments
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \
|
||||
k40, k41, k42, k43, k45, k46, k90, k92, k93, k94, k95, k96, k97 \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07 }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17 }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27 }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37 }, \
|
||||
{ k40, k41, k42, k43, KC_NO, k45, k46, KC_NO }, \
|
||||
{ k50, k51, k52, k53, k54, k55, k56, k57 }, \
|
||||
{ k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
|
||||
{ k70, k71, k72, k73, k74, k75, KC_NO, KC_NO }, \
|
||||
{ k80, k81, k82, k83, k84, k85, k86, KC_NO }, \
|
||||
{ k90, KC_NO, k92, k93, k94, k95, k96, k97 } \
|
||||
}
|
||||
|
||||
void matrix_init_user(void);
|
||||
void matrix_scan_user(void);
|
||||
|
||||
#endif
|
@ -0,0 +1,100 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xC1ED
|
||||
#define PRODUCT_ID 0x2320
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Clueboard
|
||||
#define PRODUCT Clueboard with RGB Underlighting
|
||||
#define DESCRIPTION QMK keyboard firmware for Clueboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 10
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
// COLS: Left to right, ROWS: Top to bottom
|
||||
|
||||
/* Column pin configuration
|
||||
* col: 0 1 2 3 4 5 6 7
|
||||
* pin: F0 F1 F4 F5 F6 F7 E6 B1
|
||||
*/
|
||||
#define COLS (int []){ F0, F1, F4, F5, F6, F7, E6, B1 }
|
||||
|
||||
/* Row pin configuration
|
||||
* row: 0 1 2 3 4 5 6 7 8 9
|
||||
* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2
|
||||
*/
|
||||
#define ROWS (int []){ B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* Backlight configuration
|
||||
*/
|
||||
#define BACKLIGHT_LEVELS 1
|
||||
|
||||
/* Underlight configuration
|
||||
*/
|
||||
#define ws2812_PORTREG PORTD
|
||||
#define ws2812_DDRREG DDRD
|
||||
#define ws2812_pin 7
|
||||
#define RGBLED_NUM 14 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
@ -0,0 +1,183 @@
|
||||
#include "clueboard2.h"
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
#include "rgblight.h"
|
||||
#endif
|
||||
|
||||
// Used for SHIFT_ESC
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _RS 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: (Base Layer) Default Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | |PGUP|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL|HOME|PGDN| END|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END),
|
||||
|
||||
/* Keymap _RS: Reset layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | | | | | | | | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | |RESET| | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL| | | |
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RS] = KEYMAP(
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(1), F(7), \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(8), \
|
||||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), F(5), \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, F(2), F(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(4), F(6), F(3)),
|
||||
#else
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
#endif
|
||||
};
|
||||
|
||||
enum function_id {
|
||||
SHIFT_ESC,
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
RGBLED_TOGGLE,
|
||||
RGBLED_STEP_MODE,
|
||||
RGBLED_INCREASE_HUE,
|
||||
RGBLED_DECREASE_HUE,
|
||||
RGBLED_INCREASE_SAT,
|
||||
RGBLED_DECREASE_SAT,
|
||||
RGBLED_INCREASE_VAL,
|
||||
RGBLED_DECREASE_VAL
|
||||
#endif
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(SHIFT_ESC),
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
[1] = ACTION_FUNCTION(RGBLED_TOGGLE),
|
||||
[2] = ACTION_FUNCTION(RGBLED_STEP_MODE),
|
||||
[3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
|
||||
[4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
|
||||
[5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
|
||||
[6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
|
||||
[7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
|
||||
[8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
|
||||
#endif
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t shift_esc_shift_mask;
|
||||
switch (id) {
|
||||
case SHIFT_ESC:
|
||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
|
||||
if (record->event.pressed) {
|
||||
if (shift_esc_shift_mask) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
add_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
if (shift_esc_shift_mask) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
del_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
}
|
||||
break;
|
||||
//led operations
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
case RGBLED_TOGGLE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_toggle();
|
||||
}
|
||||
break;
|
||||
case RGBLED_INCREASE_HUE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_hue();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_HUE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_hue();
|
||||
}
|
||||
break;
|
||||
case RGBLED_INCREASE_SAT:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_sat();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_SAT:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_sat();
|
||||
}
|
||||
break;
|
||||
case RGBLED_INCREASE_VAL:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_val();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_VAL:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_val();
|
||||
}
|
||||
break;
|
||||
case RGBLED_STEP_MODE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_step();
|
||||
}
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
}
|
@ -0,0 +1,147 @@
|
||||
#include "clueboard2.h"
|
||||
|
||||
#ifdef ENABLE_RGBLIGHT
|
||||
#include "rgblight.h"
|
||||
#endif
|
||||
|
||||
// Used for SHIFT_ESC
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _RS 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: (Base Layer) Default Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| ~| BS| |PgUp|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PgDn|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| Up|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | Ctrl| Alt| Gui| MHen| Space| Space| Hen| Gui| Alt| Ctrl|Left|Down|Rght|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
|
||||
MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \
|
||||
KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | |PGUP|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL|HOME|PGDN| END|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_PGUP, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END),
|
||||
|
||||
/* Keymap _RS: Reset/Underlight layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | | | | | | | | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | |RESET| | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL| | | |
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RS] = KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(0), F(6), \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(7), \
|
||||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), F(4), \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, F(1), F(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(3), F(5), F(2)),
|
||||
};
|
||||
|
||||
enum function_id {
|
||||
RGBLED_TOGGLE,
|
||||
RGBLED_STEP_MODE,
|
||||
RGBLED_INCREASE_HUE,
|
||||
RGBLED_DECREASE_HUE,
|
||||
RGBLED_INCREASE_SAT,
|
||||
RGBLED_DECREASE_SAT,
|
||||
RGBLED_INCREASE_VAL,
|
||||
RGBLED_DECREASE_VAL,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(RGBLED_TOGGLE),
|
||||
[1] = ACTION_FUNCTION(RGBLED_STEP_MODE),
|
||||
[2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
|
||||
[3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
|
||||
[4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
|
||||
[5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
|
||||
[6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
|
||||
[7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
switch (id) {
|
||||
case RGBLED_TOGGLE:
|
||||
//led operations
|
||||
if (record->event.pressed) {
|
||||
rgblight_toggle();
|
||||
}
|
||||
|
||||
break;
|
||||
case RGBLED_INCREASE_HUE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_hue();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_HUE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_hue();
|
||||
}
|
||||
break;
|
||||
case RGBLED_INCREASE_SAT:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_sat();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_SAT:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_sat();
|
||||
}
|
||||
break;
|
||||
case RGBLED_INCREASE_VAL:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_val();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_VAL:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_val();
|
||||
}
|
||||
break;
|
||||
case RGBLED_STEP_MODE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_step();
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
@ -0,0 +1,108 @@
|
||||
#include "clueboard2.h"
|
||||
|
||||
// Used for SHIFT_ESC
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _RS 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: (Base Layer) Default Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
|
||||
KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
|
||||
KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
|
||||
KC_LCTL,KC_LALT,KC_LGUI,MO(_FL), KC_SPC, KC_SPC, MO(_FL), KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | |PGUP|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL|HOME|PGDN| END|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_DEL, BL_STEP, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_PGUP, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL), KC_TRNS,KC_TRNS, MO(_FL),KC_TRNS,KC_TRNS,MO(_FL),KC_HOME,KC_PGDN,KC_END),
|
||||
|
||||
/* Keymap _RS: Reset layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | | | | | | | | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | |RESET| | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL| | | |
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RS] = KEYMAP(
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL),KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
};
|
||||
|
||||
enum function_id {
|
||||
SHIFT_ESC,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(SHIFT_ESC),
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t shift_esc_shift_mask;
|
||||
switch (id) {
|
||||
case SHIFT_ESC:
|
||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
|
||||
if (record->event.pressed) {
|
||||
if (shift_esc_shift_mask) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
add_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
if (shift_esc_shift_mask) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
del_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
@ -0,0 +1,36 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include "stdint.h"
|
||||
#include "led.h"
|
||||
|
||||
|
||||
void led_init_ports() {
|
||||
// * Set our LED pins as output
|
||||
DDRB |= (1<<4);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
PORTB |= (1<<4);
|
||||
} else {
|
||||
// Turn capslock off
|
||||
PORTB &= ~(1<<4);
|
||||
}
|
||||
}
|
@ -0,0 +1,136 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = cluepad
|
||||
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
TMK_DIR = ../../tmk_core
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# # project specific files
|
||||
SRC = cluepad.c backlight.c
|
||||
|
||||
ifdef KEYMAP
|
||||
SRC := keymaps/keymap_$(KEYMAP).c $(SRC)
|
||||
else
|
||||
SRC := keymaps/keymap_default.c $(SRC)
|
||||
endif
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
# MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
# EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable numpad's backlight functionality
|
||||
RGBLIGHT_ENABLE = yes
|
||||
# MIDI_ENABLE = YES # MIDI controls
|
||||
# UNICODE_ENABLE = YES # Unicode
|
||||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
# Optimize size but this may cause error "relocation truncated to fit"
|
||||
#EXTRALDFLAGS = -Wl,--relax
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
VPATH += $(TMK_DIR)
|
||||
|
||||
include $(TOP_DIR)/quantum/quantum.mk
|
@ -0,0 +1,54 @@
|
||||
#include <avr/io.h>
|
||||
#include "backlight.h"
|
||||
#include "led.h"
|
||||
|
||||
#include "print.h"
|
||||
|
||||
int pwm_level;
|
||||
|
||||
void led_set_kb(uint8_t usb_led)
|
||||
{
|
||||
print("led_set\n");
|
||||
}
|
||||
|
||||
void init_backlight_pin(void)
|
||||
{
|
||||
// Set C7 to output
|
||||
DDRC |= (1<<7);
|
||||
|
||||
// Initialize the timer
|
||||
TC4H = 0x03;
|
||||
OCR4C = 0xFF;
|
||||
TCCR4A = 0b10000010;
|
||||
TCCR4B = 0b00000001;
|
||||
}
|
||||
|
||||
void backlight_set(uint8_t level)
|
||||
{
|
||||
// Determine the PWM level
|
||||
switch (level)
|
||||
{
|
||||
case 0:
|
||||
// 33%
|
||||
pwm_level = 0x54;
|
||||
break;
|
||||
case 1:
|
||||
// 66%
|
||||
pwm_level = 0xA8;
|
||||
break;
|
||||
case 2:
|
||||
// 100%
|
||||
pwm_level = 0xFF;
|
||||
break;
|
||||
case 3:
|
||||
// 0%
|
||||
pwm_level = 0x00;
|
||||
break;
|
||||
default:
|
||||
xprintf("Unknown level: %d\n", level);
|
||||
}
|
||||
|
||||
// Write the PWM level to the timer
|
||||
TC4H = pwm_level >> 8;
|
||||
OCR4A = 0xFF & pwm_level;
|
||||
}
|
@ -0,0 +1,39 @@
|
||||
#include "cluepad.h"
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_user(void) {
|
||||
// leave these blank
|
||||
};
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
// leave these blank
|
||||
};
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
if (matrix_init_user) {
|
||||
(*matrix_init_user)();
|
||||
}
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
init_backlight_pin();
|
||||
#endif
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
rgblight_init();
|
||||
#endif
|
||||
|
||||
// JTAG disable for PORT F. write JTD bit twice within four cycles.
|
||||
MCUCR |= (1<<JTD);
|
||||
MCUCR |= (1<<JTD);
|
||||
};
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
if (matrix_scan_user) {
|
||||
(*matrix_scan_user)();
|
||||
}
|
||||
};
|
@ -0,0 +1,41 @@
|
||||
#ifndef CLUEPAD_H
|
||||
#define CLUEPAD_H
|
||||
|
||||
#include "matrix.h"
|
||||
#include "keymap_common.h"
|
||||
#include <stddef.h>
|
||||
|
||||
|
||||
/* Cluepad matrix layout
|
||||
* .-------------------.
|
||||
* |NLCK| /| *| -|
|
||||
* |-------------------|
|
||||
* | 7| 8| 9| |
|
||||
* |--------------| |
|
||||
* | 4| 5| 6| +|
|
||||
* |-------------------|
|
||||
* | 1| 2| 3| |
|
||||
* |--------------| |
|
||||
* | 0| .| Ent|
|
||||
* '-------------------'
|
||||
*/
|
||||
// The first section contains all of the arguments
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, \
|
||||
k10, k11, k12, k13, \
|
||||
k20, k21, k22, \
|
||||
k30, k31, k32, k33, \
|
||||
k40, k42 \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, }, \
|
||||
{ k10, k11, k12, k13, }, \
|
||||
{ k20, k21, k22, KC_NO, }, \
|
||||
{ k30, k31, k32, k33, }, \
|
||||
{ k40, KC_NO, k42, KC_NO } \
|
||||
}
|
||||
|
||||
void matrix_init_user(void);
|
||||
void matrix_scan_user(void);
|
||||
|
||||
#endif
|
@ -0,0 +1,102 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xC1ED
|
||||
#define PRODUCT_ID 0x2312
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Clueboard
|
||||
#define PRODUCT Cluepad with RGB Underlighting
|
||||
#define DESCRIPTION QMK keyboard firmware for Cluepad
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 4
|
||||
|
||||
// COLS: Left to right, ROWS: Top to bottom
|
||||
|
||||
/* Column pin configuration
|
||||
* col: 0 1 2 3
|
||||
* pin: F4 E6 B1 D2
|
||||
*/
|
||||
#define COLS (int []){ F4, E6, B1, D2 }
|
||||
|
||||
/* Row pin configuration
|
||||
* row: 0 1 2 3 4
|
||||
* pin:
|
||||
*/
|
||||
#define ROWS (int []){ B0, D3, D5, D4, D6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Number of backlighting levels */
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* Underlight configuration
|
||||
*/
|
||||
#define ws2812_PORTREG PORTF
|
||||
#define ws2812_DDRREG DDRF
|
||||
#define ws2812_pin 6
|
||||
#define RGBLED_NUM 4 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* Debug forcibly enabled */
|
||||
#define ALWAYS_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
@ -0,0 +1,122 @@
|
||||
#include "cluepad.h"
|
||||
|
||||
#include "backlight.h"
|
||||
#include "rgblight.h"
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _RS 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: (Base Layer) Default Layer
|
||||
* .-------------------.
|
||||
* |NL F| /| *| -|
|
||||
* |-------------------|
|
||||
* | 7| 8| 9| |
|
||||
* |--------------| |
|
||||
* | 4| 5| 6| +|
|
||||
* |-------------------|
|
||||
* | 1| 2| 3| |
|
||||
* |--------------| |
|
||||
* | 0| .| Ent|
|
||||
* '-------------------'
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
LT(_FL, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, \
|
||||
KC_P7, KC_P8, KC_P9, KC_PPLS, \
|
||||
KC_P4, KC_P5, KC_P6, \
|
||||
KC_P1, KC_P2, KC_P3, KC_PENT, \
|
||||
KC_P0, KC_PDOT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
* .-------------------.
|
||||
* |NL F| | | Fn0|
|
||||
* |-------------------|
|
||||
* | | Fn4| | |
|
||||
* |--------------| |
|
||||
* | Fn3|BL_S| Fn2| Fn6|
|
||||
* |-------------------|
|
||||
* | | Fn5| | |
|
||||
* |--------------| |
|
||||
* | Fn1| | Fn7|
|
||||
* '-------------------'
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
LT(_FL, KC_NLCK), KC_TRNS, KC_TRNS, F(0), \
|
||||
KC_TRNS, F(4), KC_TRNS, F(6), \
|
||||
F(3), BL_STEP, F(2), \
|
||||
KC_TRNS, F(5), KC_TRNS, F(7), \
|
||||
F(1), KC_TRNS)
|
||||
};
|
||||
|
||||
enum function_id {
|
||||
RGBLED_TOGGLE,
|
||||
RGBLED_STEP_MODE,
|
||||
RGBLED_INCREASE_HUE,
|
||||
RGBLED_DECREASE_HUE,
|
||||
RGBLED_INCREASE_SAT,
|
||||
RGBLED_DECREASE_SAT,
|
||||
RGBLED_INCREASE_VAL,
|
||||
RGBLED_DECREASE_VAL,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(RGBLED_TOGGLE),
|
||||
[1] = ACTION_FUNCTION(RGBLED_STEP_MODE),
|
||||
[2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
|
||||
[3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
|
||||
[4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
|
||||
[5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
|
||||
[6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
|
||||
[7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
switch (id) {
|
||||
case RGBLED_TOGGLE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_toggle();
|
||||
}
|
||||
break;
|
||||
case RGBLED_INCREASE_HUE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_hue();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_HUE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_hue();
|
||||
}
|
||||
break;
|
||||
case RGBLED_INCREASE_SAT:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_sat();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_SAT:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_sat();
|
||||
}
|
||||
break;
|
||||
case RGBLED_INCREASE_VAL:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_val();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_VAL:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_val();
|
||||
}
|
||||
break;
|
||||
case RGBLED_STEP_MODE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_step();
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
@ -0,0 +1,385 @@
|
||||
[
|
||||
{
|
||||
"name": "Beginner's Keymap for Ergodox-EZ",
|
||||
"author": "Anand Babu Periasamy"
|
||||
},
|
||||
[
|
||||
{
|
||||
"x": 3.5
|
||||
},
|
||||
"#\n3\n\n\nF3",
|
||||
{
|
||||
"x": 10.5
|
||||
},
|
||||
")\n0\n\n\nF10"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.875,
|
||||
"x": 2.5
|
||||
},
|
||||
"@\n2\n\n\nF2",
|
||||
{
|
||||
"x": 1
|
||||
},
|
||||
"$\n4\n\n\nF4",
|
||||
{
|
||||
"x": 8.5
|
||||
},
|
||||
"(\n9\n\n\nF9",
|
||||
{
|
||||
"x": 1
|
||||
},
|
||||
"_\n-\n\n\nF11"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.875,
|
||||
"x": 5.5
|
||||
},
|
||||
"%\n5\n\n\nF5",
|
||||
"^\n6\n\n\nF6",
|
||||
{
|
||||
"x": 4.5
|
||||
},
|
||||
"&\n7\n\n\nF7",
|
||||
"*\n8\n\n\nF8"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.875,
|
||||
"w": 1.5
|
||||
},
|
||||
"~\n`\n\n\nEsc",
|
||||
"!\n1\n\n\nF1",
|
||||
{
|
||||
"x": 14.5
|
||||
},
|
||||
"+\n=\n\n\nF12",
|
||||
{
|
||||
"a": 7,
|
||||
"w": 1.5
|
||||
},
|
||||
"Backspace\n\n\n\nBackspace"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.375,
|
||||
"x": 3.5
|
||||
},
|
||||
"E\n\n\n\n<i class=\"fa fa-caret-up\" aria-hidden=\"true\"></i>",
|
||||
{
|
||||
"x": 10.5
|
||||
},
|
||||
"I"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.8799999999999999,
|
||||
"x": 2.5
|
||||
},
|
||||
"W"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.9950000000000001,
|
||||
"x": 4.5,
|
||||
"a": 4
|
||||
},
|
||||
"R",
|
||||
{
|
||||
"x": 8.5,
|
||||
"a": 7
|
||||
},
|
||||
"U",
|
||||
{
|
||||
"x": 1
|
||||
},
|
||||
"O"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.875,
|
||||
"x": 5.5
|
||||
},
|
||||
"T",
|
||||
{
|
||||
"h": 1.5
|
||||
},
|
||||
"<i class=\"fa fa-chevron-circle-left\" aria-hidden=\"true\"></i>",
|
||||
{
|
||||
"x": 4.5,
|
||||
"h": 1.5
|
||||
},
|
||||
"<i class=\"fa fa-chevron-circle-right\" aria-hidden=\"true\"></i>",
|
||||
"Y"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.875,
|
||||
"a": 6,
|
||||
"w": 1.5
|
||||
},
|
||||
"Tab",
|
||||
{
|
||||
"a": 7
|
||||
},
|
||||
"Q",
|
||||
{
|
||||
"x": 14.5
|
||||
},
|
||||
"P",
|
||||
{
|
||||
"a": 4,
|
||||
"w": 1.5
|
||||
},
|
||||
"|\n\\"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.375,
|
||||
"x": 3.5,
|
||||
"a": 7
|
||||
},
|
||||
"D\n\n\n\n<i class=\"fa fa-caret-down\" aria-hidden=\"true\"></i>",
|
||||
{
|
||||
"x": 10.5
|
||||
},
|
||||
"K"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.875,
|
||||
"x": 2.5
|
||||
},
|
||||
"S\n\n\n\n<i class=\"fa fa-caret-left\" aria-hidden=\"true\"></i>",
|
||||
{
|
||||
"x": 1
|
||||
},
|
||||
"F\n\n\n\n<i class=\"fa fa-caret-right\" aria-hidden=\"true\"></i>",
|
||||
{
|
||||
"x": 8.5
|
||||
},
|
||||
"J",
|
||||
{
|
||||
"x": 1
|
||||
},
|
||||
"L"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.875,
|
||||
"x": 5.5
|
||||
},
|
||||
"G",
|
||||
{
|
||||
"x": 6.5
|
||||
},
|
||||
"H"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.875,
|
||||
"a": 4,
|
||||
"fa": [
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
2
|
||||
],
|
||||
"w": 1.5
|
||||
},
|
||||
"\n\n\nCtrl\n\n\nCaps",
|
||||
{
|
||||
"a": 7
|
||||
},
|
||||
"A",
|
||||
{
|
||||
"x": 14.5,
|
||||
"a": 4
|
||||
},
|
||||
":\n;",
|
||||
{
|
||||
"a": 7,
|
||||
"w": 1.5
|
||||
},
|
||||
"Enter"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.625,
|
||||
"x": 6.5,
|
||||
"h": 1.5
|
||||
},
|
||||
"PgUp",
|
||||
{
|
||||
"x": 4.5,
|
||||
"h": 1.5
|
||||
},
|
||||
"PgDn"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.75,
|
||||
"x": 3.5
|
||||
},
|
||||
"C",
|
||||
{
|
||||
"x": 10.5,
|
||||
"a": 4
|
||||
},
|
||||
"<\n,"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.875,
|
||||
"x": 2.5,
|
||||
"a": 7
|
||||
},
|
||||
"X",
|
||||
{
|
||||
"x": 1
|
||||
},
|
||||
"V",
|
||||
{
|
||||
"x": 8.5
|
||||
},
|
||||
"M",
|
||||
{
|
||||
"x": 1,
|
||||
"a": 4
|
||||
},
|
||||
">\n."
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.875,
|
||||
"x": 5.5,
|
||||
"a": 7
|
||||
},
|
||||
"B",
|
||||
{
|
||||
"x": 6.5
|
||||
},
|
||||
"N"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.875,
|
||||
"w": 1.5
|
||||
},
|
||||
"Shift",
|
||||
"Z",
|
||||
{
|
||||
"x": 14.5,
|
||||
"a": 4
|
||||
},
|
||||
"?\n/",
|
||||
{
|
||||
"w": 1.5
|
||||
},
|
||||
"\"\n'"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.375,
|
||||
"x": 3.5,
|
||||
"a": 7
|
||||
},
|
||||
"Alt\n\n\n\n<i class=\"fa fa-hand-o-left\" aria-hidden=\"true\"></i>",
|
||||
{
|
||||
"x": 10.5
|
||||
},
|
||||
"<i class=\"fa fa-long-arrow-down\" aria-hidden=\"true\"></i>\n\n\n\n<i class='fa fa-volume-down'></i>"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.875,
|
||||
"x": 2.5
|
||||
},
|
||||
"<i class='fa fa-linux'></i>",
|
||||
{
|
||||
"x": 1
|
||||
},
|
||||
"Alt\n\n\n\n<i class=\"fa fa-hand-o-right\" aria-hidden=\"true\"></i>",
|
||||
{
|
||||
"x": 8.5
|
||||
},
|
||||
"<i class=\"fa fa-long-arrow-left\" aria-hidden=\"true\"></i>",
|
||||
{
|
||||
"x": 1
|
||||
},
|
||||
"<i class=\"fa fa-long-arrow-up\" aria-hidden=\"true\"></i>\n\n\n\n<i class='fa fa-volume-up'></i>"
|
||||
],
|
||||
[
|
||||
{
|
||||
"y": -0.75,
|
||||
"x": 0.5
|
||||
},
|
||||
"Ctrl\n\n\n\n<i class='fa fa-download'></i>",
|
||||
"Esc",
|
||||
{
|
||||
"x": 14.5
|
||||
},
|
||||
"<i class=\"fa fa-long-arrow-right\" aria-hidden=\"true\"></i>\n\n\n\n<i class='fa fa-volume-off'></i>",
|
||||
"Fn"
|
||||
],
|
||||
[
|
||||
{
|
||||
"r": 30,
|
||||
"rx": 6.5,
|
||||
"ry": 4.25,
|
||||
"y": -1,
|
||||
"x": 1
|
||||
},
|
||||
"<i class=\"fa fa-clone\" aria-hidden=\"true\"></i>",
|
||||
"("
|
||||
],
|
||||
[
|
||||
{
|
||||
"h": 2
|
||||
},
|
||||
"Space",
|
||||
{
|
||||
"h": 2
|
||||
},
|
||||
"Del",
|
||||
"["
|
||||
],
|
||||
[
|
||||
{
|
||||
"x": 2
|
||||
},
|
||||
"{"
|
||||
],
|
||||
[
|
||||
{
|
||||
"r": -30,
|
||||
"rx": 13,
|
||||
"y": -1,
|
||||
"x": -3
|
||||
},
|
||||
")",
|
||||
"<i class=\"fa fa-paste\" aria-hidden=\"true\"></i>"
|
||||
],
|
||||
[
|
||||
{
|
||||
"x": -3
|
||||
},
|
||||
"]",
|
||||
{
|
||||
"h": 2
|
||||
},
|
||||
"Enter",
|
||||
{
|
||||
"h": 2
|
||||
},
|
||||
"<i class=\"fa fa-chevron-left\" aria-hidden=\"true\"></i>"
|
||||
],
|
||||
[
|
||||
{
|
||||
"x": -3
|
||||
},
|
||||
"}"
|
||||
]
|
||||
]
|
After Width: | Height: | Size: 78 KiB |
@ -0,0 +1,140 @@
|
||||
#include "ergodox_ez.h"
|
||||
#include "debug.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
#define BASE 0 // default layer
|
||||
#define FN1 1 // media layer
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap 0: Basic layer
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | | 7 | 8 | 9 | 0 | - | = | BSpace |
|
||||
* |--------+------+------+------+------+------+------| |------+------+------+------+------+------+--------|
|
||||
* | Tab | Q | W | E | R | T | Fwd | | Back | Y | U | I | O | P | \ |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* |Caps/Ctl| A | S | D | F | G |------| |------| H | J | K | L | ; | Enter |
|
||||
* |--------+------+------+------+------+------| PgUp | | PgDn |------+------+------+------+------+--------|
|
||||
* | LShift | Z | X | C | V | B | | | | N | M | , | . | / | ' |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | Ctrl | Esc | LGui | Alt | Alt | | Left | Up | Dn | Right| Fn |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | Copy | ( | | ) | Paste|
|
||||
* ,------|------+------| |------+------+------.
|
||||
* | | | [ | | ] | | |
|
||||
* |Space | Del |------| |------| Enter|BSpace|
|
||||
* | | | { | | } | | |
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
|
||||
// Otherwise, it needs KC_*
|
||||
[BASE] = KEYMAP( // layer 0 : default
|
||||
// left hand
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_WBAK,
|
||||
CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_PGUP,
|
||||
KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, KC_LALT,
|
||||
LCTL(KC_C), KC_LCBR,
|
||||
KC_LPRN,
|
||||
KC_SPC, KC_DEL, KC_LBRC,
|
||||
// right hand
|
||||
KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_WFWD, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
|
||||
KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
|
||||
KC_PGDN, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT,
|
||||
KC_UP, KC_LEFT, KC_RIGHT,KC_DOWN, TG(FN1),
|
||||
KC_RCBR, LCTL(KC_V),
|
||||
KC_RPRN,
|
||||
KC_RBRC, KC_ENT, KC_BSPC
|
||||
),
|
||||
/* Keymap 1: Fn Keys, media and mouse keys
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | Esc | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | BSpace |
|
||||
* |--------+------+------+------+------+------+------| |------+------+------+------+------+------+--------|
|
||||
* | | | | MsUp | | | | | | | | | | | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* |Teensy| | | Lclk | Rclk | | |VolUp |VolDn | Mute | |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | | | | | |
|
||||
* ,------|------+------| |------+------+------.
|
||||
* | | | | | | | |
|
||||
* | | |------| |------| | |
|
||||
* | | | | | | | |
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
// FN1 Layer
|
||||
[FN1] = KEYMAP(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
RESET, KC_TRNS, KC_TRNS,
|
||||
// right hand
|
||||
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
// Runs just one time when the keyboard initializes.
|
||||
void matrix_init_user(void) {
|
||||
|
||||
};
|
||||
|
||||
// Runs constantly in the background, in a loop.
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
uint8_t layer = biton32(layer_state);
|
||||
|
||||
ergodox_board_led_off();
|
||||
ergodox_right_led_1_off();
|
||||
ergodox_right_led_2_off();
|
||||
ergodox_right_led_3_off();
|
||||
switch (layer) {
|
||||
// TODO: Make this relevant to the ErgoDox EZ.
|
||||
case 1:
|
||||
ergodox_right_led_1_on();
|
||||
break;
|
||||
case 2:
|
||||
ergodox_right_led_2_on();
|
||||
break;
|
||||
default:
|
||||
// none
|
||||
break;
|
||||
}
|
||||
|
||||
};
|
@ -0,0 +1,21 @@
|
||||
# Beginner's keymap for Ergodox-EZ
|
||||
Beginner's keymap emulates standard QWERTY keyboard for beginners. Once you get comfortable with the Ergodox-EZ, you may fork this keymap and customize it for your own needs or find a suitable one from the community contributed keymaps.
|
||||
|
||||
![Beginner's Keymap](keyboard-layout.png)
|
||||
|
||||
#### Pros
|
||||
* Easier to switch between regular keyboards and Ergodox-EZ.
|
||||
* Easy on beginners. It has everything you need for your day to day usage.
|
||||
|
||||
#### Cons
|
||||
* Keys are not ergonomically placed to take full advantage of Ergodox-EZ. Take a look at this [Default Keymap](https://github.com/jackhumbert/qmk_firmware/blob/master/keyboard/ergodox_ez/keymaps/default/readme.md)
|
||||
* While multiple layers are possible, beginner's keymap only uses one additional layer for mouse, function and volume keys.
|
||||
|
||||
#### Notes
|
||||
* Ideally number key [6] should have started from the right-hand side of the keyboard. Doing so breaks the familiar QWERTY layout.
|
||||
* Quote key ['] should have been placed between [:] and [Enter]. Due to lack of key space, it is placed below [Enter].
|
||||
* Double [Alt] keys are placed adjacent to each other for convenience.
|
||||
* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users.
|
||||
* Additional bracket keys are placed in the center of the keyboard for programmer's convenience.
|
||||
|
||||
|
@ -0,0 +1,8 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "config.h"
|
||||
#define ONESHOT_TAP_TOGGLE 2
|
||||
#define ONESHOT_TIMEOUT 3000
|
||||
|
||||
#endif
|
@ -0,0 +1,5 @@
|
||||
# Having a file like this allows you to override Makefile definitions
|
||||
# for your own particular keymap
|
||||
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
Before Width: | Height: | Size: 97 KiB After Width: | Height: | Size: 97 KiB |
Before Width: | Height: | Size: 118 KiB After Width: | Height: | Size: 121 KiB |
After Width: | Height: | Size: 62 KiB |
@ -0,0 +1,27 @@
|
||||
[{x:3.5,a:7},"",{x:10.5},""],
|
||||
[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
|
||||
[{y:-0.875,x:5.5},"",{c:"#ff4444",a:4},"Esc",{x:4.5,c:"#cccccc",a:7},"",""],
|
||||
[{y:-0.875,c:"#000000",t:"#ff0000",a:4,w:1.5},"Special\n\n\n\n\n\nShift",{c:"#ff4444",t:"#000000"},"Esc",{x:14.5,c:"#54d6de"},"Back\n\n\n\n\n\nspace",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSpecial\n\n\n\n\nShift"],
|
||||
[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""],
|
||||
[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
|
||||
[{y:-0.875,x:5.5},"",{h:1.5},"",{x:4.5,h:1.5},"",""],
|
||||
[{y:-0.875,w:1.5},"","",{x:14.5},"",{w:1.5},""],
|
||||
[{y:-0.375,x:3.5},"",{x:10.5},""],
|
||||
[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
|
||||
[{y:-0.875,x:5.5},"",{x:6.5},""],
|
||||
[{y:-0.875,w:1.5},"","",{x:14.5},"",{w:1.5},""],
|
||||
[{y:-0.625,x:6.5,h:1.5},"",{x:4.5,h:1.5},""],
|
||||
[{y:-0.75,x:3.5},"",{x:10.5},""],
|
||||
[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
|
||||
[{y:-0.875,x:5.5},"",{x:6.5},""],
|
||||
[{y:-0.875,w:1.5},"","",{x:14.5},"",{c:"#2277ff",w:1.5},"RShift"],
|
||||
[{y:-0.375,x:3.5,c:"#cccccc"},"",{x:10.5},""],
|
||||
[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
|
||||
[{y:-0.75,x:0.5},"","",{x:14.5},"",""],
|
||||
[{r:30,rx:6.5,ry:4.25,y:-1,x:1},"",""],
|
||||
[{h:2},"",{h:2},"",""],
|
||||
[{x:2},""],
|
||||
[{r:-30,rx:13,y:-1,x:-3},"",""],
|
||||
[{x:-3},"",{h:2},"",{h:2},""],
|
||||
[{x:-3},""]
|
||||
|
Before Width: | Height: | Size: 101 KiB After Width: | Height: | Size: 101 KiB |
@ -0,0 +1,45 @@
|
||||
#include "ergodox_ez.h"
|
||||
#include "debug.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
#define BASE 0
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[BASE] = KEYMAP(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F5,
|
||||
KC_TAB, KC_Q, KC_W, KC_D, KC_F, KC_K, KC_BSLS,
|
||||
CTL_T(KC_ESC), KC_A, KC_S, KC_E, KC_T, KC_G,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC,
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_LGUI,
|
||||
/*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLD, KC_MUTE,
|
||||
/*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLU,
|
||||
/*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_BSPC, CTL_T(KC_ESC), KC_LALT,
|
||||
//
|
||||
/*-*/ KC_F6, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL,
|
||||
/*-*/ KC_NO, KC_J, KC_U, KC_R, KC_L, KC_SCLN, KC_MINS,
|
||||
/*-*/ /*-*/ KC_Y, KC_N, KC_I, KC_O, KC_H, KC_ENT,
|
||||
/*-*/ KC_RBRC, KC_P, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
/*-*/ /*-*/ /*-*/ KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT,
|
||||
KC_MPLY, KC_MNXT,
|
||||
KC_MPRV,
|
||||
KC_RALT, KC_QUOT, KC_SPC
|
||||
)
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
};
|
||||
|
||||
// Runs just one time when the keyboard initializes.
|
||||
void matrix_init_user(void) {
|
||||
ergodox_board_led_off();
|
||||
ergodox_right_led_1_off();
|
||||
ergodox_right_led_2_off();
|
||||
ergodox_right_led_3_off();
|
||||
};
|
||||
|
||||
// Runs constantly in the background, in a loop.
|
||||
void matrix_scan_user(void) {
|
||||
};
|
@ -0,0 +1,28 @@
|
||||
# Roman's Layout
|
||||
|
||||
There is only one layer based on [Norman layout](https://normanlayout.info/).
|
||||
|
||||
Looking for multiple-layer layouts?
|
||||
|
||||
- [Symbols, arrows, plover, HJKL arrows](../romanzolotarev-norman-plover-osx-hjkl/)
|
||||
- [Same with IJKL arrows](../romanzolotarev-norman-plover-osx/)
|
||||
|
||||
[![keyboard-layout](romanzolotarev-norman-osx.png)](http://www.keyboard-layout-editor.com/#/gists/9e89d54f1ea6eeeb7dab1b2d19d28195)
|
||||
|
||||
## Functional Keys
|
||||
|
||||
- Tap `F1` to mute microphone via [Shush](http://mizage.com/shush/).
|
||||
- Tap `F2` to copy screenshot to the clipboard.
|
||||
- Hold `SHIFT` and tap `F2` to save screenshot as a file.
|
||||
- Tap `F3`, `F4`, `F5`, `F6` to resize a window via [Divvy](http://mizage.com/divvy/).
|
||||
|
||||
## CTRL/ESC
|
||||
|
||||
CTRL and ESC are frequently used in Vim.
|
||||
|
||||
- Tap `CTRL/ESC` to send `ESC`.
|
||||
- Hold `CTRL/ESC` to use as `CTRL`.
|
||||
|
||||
## Activate N-rollover
|
||||
|
||||
- Hold left `SHIFT` and right `SHIRT` and then tap `N`.
|
After Width: | Height: | Size: 95 KiB |
@ -0,0 +1,73 @@
|
||||
#include "ergodox_ez.h"
|
||||
#include "debug.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
#define BASE 0
|
||||
#define QWRT 1
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[BASE] = KEYMAP(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F5,
|
||||
KC_TAB, KC_Q, KC_W, KC_D, KC_F, KC_K, KC_BSLS,
|
||||
KC_LCTL, KC_A, KC_S, KC_E, KC_T, KC_G,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC,
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_LGUI,
|
||||
/*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLD, KC_MUTE,
|
||||
/*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLU,
|
||||
/*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_BSPC, CTL_T(KC_ESC), KC_LALT,
|
||||
//
|
||||
/*-*/ KC_F6, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL,
|
||||
/*-*/ TG(QWRT), KC_J, KC_U, KC_R, KC_L, KC_SCLN, KC_MINS,
|
||||
/*-*/ /*-*/ KC_Y, KC_N, KC_I, KC_O, KC_H, KC_ENT,
|
||||
/*-*/ KC_RBRC, KC_P, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
/*-*/ /*-*/ /*-*/ KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT,
|
||||
KC_MPLY, KC_MNXT,
|
||||
KC_MPRV,
|
||||
KC_RALT, KC_QUOT, KC_SPC
|
||||
),
|
||||
[QWRT] = KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_E, KC_R, KC_T, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_D, KC_F, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
/*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS,
|
||||
/*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS,
|
||||
/*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
//
|
||||
/*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
/*-*/ KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_TRNS,
|
||||
/*-*/ /*-*/ KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_TRNS,
|
||||
/*-*/ KC_TRNS, KC_N, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
/*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
};
|
||||
|
||||
// Runs just one time when the keyboard initializes.
|
||||
void matrix_init_user(void) {
|
||||
};
|
||||
|
||||
// Runs constantly in the background, in a loop.
|
||||
void matrix_scan_user(void) {
|
||||
uint8_t layer = biton32(layer_state);
|
||||
ergodox_board_led_off();
|
||||
ergodox_right_led_1_off();
|
||||
ergodox_right_led_2_off();
|
||||
ergodox_right_led_3_off();
|
||||
switch (layer) {
|
||||
case QWRT:
|
||||
ergodox_right_led_1_on();
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
};
|
@ -0,0 +1,34 @@
|
||||
# Roman's Layout
|
||||
|
||||
There are two layers:
|
||||
|
||||
- **BASE** is [Norman layout](https://normanlayout.info/).
|
||||
- **QWRT** is QWERTY.
|
||||
|
||||
[![keyboard-layout](romanzolotarev-norman-qwerty-osx.png)](http://www.keyboard-layout-editor.com/#/gists/3b236f450da474dc506a5a80390c3cc7)
|
||||
|
||||
## Switching
|
||||
|
||||
- Tap `QWRT` to toggle **QWRT**.
|
||||
|
||||
## LEDs
|
||||
|
||||
- Red: QWRT is on.
|
||||
|
||||
## Functional Keys
|
||||
|
||||
- Tap `F1` to mute microphone via [Shush](http://mizage.com/shush/).
|
||||
- Tap `F2` to copy screenshot to the clipboard.
|
||||
- Hold `SHIFT` and tap `F2` to save screenshot as a file.
|
||||
- Tap `F3`, `F4`, `F5`, `F6` to resize a window via [Divvy](http://mizage.com/divvy/).
|
||||
|
||||
## CTRL/ESC
|
||||
|
||||
Both CTRL and ESC are frequently used in Vim.
|
||||
|
||||
- Tap `CTRL/ESC` to send `ESC`.
|
||||
- Hold `CTRL/ESC` to use as `CTRL`.
|
||||
|
||||
## Activate N-rollover
|
||||
|
||||
- Hold left `SHIFT` and right `SHIRT` and then tap `N`.
|
After Width: | Height: | Size: 98 KiB |
@ -0,0 +1,6 @@
|
||||
# ergodox_keymap
|
||||
|
||||
Based on the default Ergodox EZ firmware
|
||||
|
||||
Replaced the left side Bksp with a Crtl/Esc, this really helps in vim.
|
||||
Removed the Ctrls from the Z and / keys.
|
@ -0,0 +1,187 @@
|
||||
// Based on `default_osx`
|
||||
// Replace left Bksp with Ctrl/Esc
|
||||
// Remove the Ctrl from Z and /
|
||||
#include "ergodox_ez.h"
|
||||
#include "debug.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
#define BASE 0 // default layer
|
||||
#define SYMB 1 // symbols
|
||||
#define MDIA 2 // media keys
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap 0: Basic layer
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* |Ctrl/Esc| A | S | D | F | G |------| |------| H | J | K | L |; / L2| LGui |
|
||||
* |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------|
|
||||
* | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | App | LGui | | Alt |Ctrl/Esc|
|
||||
* ,------|------|------| |------+--------+------.
|
||||
* | | | Home | | PgUp | | |
|
||||
* | Space|Backsp|------| |------| Tab |Enter |
|
||||
* | |ace | End | | PgDn | | |
|
||||
* `--------------------' `----------------------'
|
||||
*/
|
||||
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
|
||||
// Otherwise, it needs KC_*
|
||||
[BASE] = KEYMAP( // layer 0 : default
|
||||
// left hand
|
||||
KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT,
|
||||
KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1),
|
||||
CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO),
|
||||
LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT,
|
||||
ALT_T(KC_APP), KC_LGUI,
|
||||
KC_HOME,
|
||||
KC_SPC,KC_BSPC,KC_END,
|
||||
// right hand
|
||||
KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
|
||||
TG(1), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
|
||||
KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
|
||||
MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1,
|
||||
KC_LALT, CTL_T(KC_ESC),
|
||||
KC_PGUP,
|
||||
KC_PGDN,KC_TAB, KC_ENT
|
||||
),
|
||||
/* Keymap 1: Symbol Layer
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | | | | | | | | . | 0 | = | |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | | | | | |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | | | | | |
|
||||
* | | |------| |------| | |
|
||||
* | | | | | | | |
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
// SYMBOLS
|
||||
[SYMB] = KEYMAP(
|
||||
// left hand
|
||||
KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS,
|
||||
KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
|
||||
KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
|
||||
KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,
|
||||
// right hand
|
||||
KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
|
||||
KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12,
|
||||
KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS,
|
||||
KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS,
|
||||
KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
/* Keymap 2: Media and mouse keys
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | | | | MsUp | | | | | | | | | | | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | | | | | | | | | | | Prev | Next | | |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | | | | | |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | | | | |Brwser|
|
||||
* | | |------| |------| |Back |
|
||||
* | | | | | | | |
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
// MEDIA AND MOUSE
|
||||
KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
// right hand
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
|
||||
KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_WBAK
|
||||
),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols)
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
// Runs just one time when the keyboard initializes.
|
||||
void matrix_init_user(void) {
|
||||
|
||||
};
|
||||
|
||||
// Runs constantly in the background, in a loop.
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
uint8_t layer = biton32(layer_state);
|
||||
|
||||
ergodox_board_led_off();
|
||||
ergodox_right_led_1_off();
|
||||
ergodox_right_led_2_off();
|
||||
ergodox_right_led_3_off();
|
||||
switch (layer) {
|
||||
// TODO: Make this relevant to the ErgoDox EZ.
|
||||
case 1:
|
||||
ergodox_right_led_1_on();
|
||||
break;
|
||||
case 2:
|
||||
ergodox_right_led_2_on();
|
||||
break;
|
||||
default:
|
||||
// none
|
||||
break;
|
||||
}
|
||||
|
||||
};
|
@ -0,0 +1,231 @@
|
||||
#include "ergodox_ez.h"
|
||||
#include "debug.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
#define BASE 0 // default layer
|
||||
#define SYMB 1 // symbols
|
||||
#define MDIA 2 // media
|
||||
#define CNTL 3 // control layer
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap 0: Basic layer
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | L1/` | 1 | 2 | 3 | 4 | 5 |CmdSpc| | - | 6 | 7 | 8 | 9 | 0 | = |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* |Meh/Tab | Q | W | E | R | T | STab | | L3 | Y | U | I | O | P | Meh/\ |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* |Hyp/Esc | L3/A | S | D | F | G |------| |------| H | J | K | L | L2/; | Hyp/' |
|
||||
* |--------+------+------+------+------+------| Tab | |AltGui|------+------+------+------+------+--------|
|
||||
* | LShift | L3/Z | X | C | V | B | | | | N | M | , | . | L2// | RShift |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* |LCtrl | LAlt | LGui |Left |Right | | UP | Down | [ | ] | L1 |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | LCtl | LGui | | LAlt |ShfGui|
|
||||
* ,-------|------|------| |------+--------+------.
|
||||
* | | | Home | | PgUp | | |
|
||||
* | Backsp|Delete|------| |------| Enter | Space |
|
||||
* | | | End | | PgDn | | |
|
||||
* `--------------------' `-----------------------'
|
||||
*/
|
||||
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
|
||||
// Otherwise, it needs KC_*
|
||||
[BASE] = KEYMAP( // layer 0 : default
|
||||
// left hand
|
||||
LT(SYMB,KC_GRV), KC_1, KC_2, KC_3, KC_4, KC_5, LGUI(KC_SPC),
|
||||
MEH_T(KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, S(KC_TAB),
|
||||
ALL_T(KC_ESC), LT(CNTL,KC_A), KC_S, KC_D, KC_F, KC_G,
|
||||
KC_LSFT, LT(CNTL,KC_Z), KC_X, KC_C, KC_V, KC_B, KC_TAB,
|
||||
KC_LCTL, KC_LALT, KC_LGUI, KC_LEFT, KC_RIGHT,
|
||||
KC_LCTL, KC_LGUI,
|
||||
KC_HOME,
|
||||
KC_BSPC, KC_DELETE, KC_END,
|
||||
// right hand
|
||||
KC_MINS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL,
|
||||
KC_FN3, KC_Y, KC_U, KC_I, KC_O, KC_P, MEH_T(KC_BSLS),
|
||||
KC_H, KC_J, KC_K, KC_L, LT(MDIA,KC_SCLN), ALL_T(KC_QUOT),
|
||||
LALT(KC_LGUI), KC_N, KC_M, KC_COMM, KC_DOT, LT(MDIA,KC_SLSH), KC_RSFT,
|
||||
KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, KC_FN1,
|
||||
KC_LALT, S(KC_LGUI),
|
||||
KC_PGUP,
|
||||
KC_PGDN,KC_ENT, KC_SPC
|
||||
),
|
||||
/* Keymap 1: Symbol Layer
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | | ! | @ | { | } | | | < | | > | : | 7 | 8 | 9 | / | F12 |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | # | $ | ( | ) | ` |------| |------| ; | 4 | 5 | 6 | * | Prnt |
|
||||
* |--------+------+------+------+------+------| F14 | | F15 |------+------+------+------+------+--------|
|
||||
* | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | - | Entr |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | | | | | | | 0 | . | = | + | |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | | | | | |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | | | | | |
|
||||
* | | |------| |------| | |
|
||||
* | | | | | | | |
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
// SYMBOLS
|
||||
[SYMB] = KEYMAP(
|
||||
// left hand
|
||||
KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS,
|
||||
KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,S(KC_COMM),
|
||||
KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
|
||||
KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_F14,
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,
|
||||
// right hand
|
||||
KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
|
||||
S(KC_DOT), KC_COLN, KC_7, KC_8, KC_9, KC_BSLS, KC_F12,
|
||||
KC_SCLN, KC_4, KC_5, KC_6, KC_ASTR, KC_PSCR,
|
||||
KC_F15, KC_AMPR, KC_1, KC_2, KC_3, KC_MINS, KC_ENT,
|
||||
KC_0, KC_DOT, KC_EQL, KC_PLUS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
/* Keymap 2: Media Layer
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | | | | | |------| |------| | | | | | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | | | | | | | | | | | |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | Prev | Next | | Prev | Next |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | VolUp| | VolUp| | |
|
||||
* | Play | Mute |------| |------| Mute | Play |
|
||||
* | | | VolDn| | VolDn| | |
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
// Control
|
||||
[MDIA] = KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_MPRV, KC_MNXT,
|
||||
KC_VOLU,
|
||||
KC_MPLY, KC_MUTE, KC_VOLD,
|
||||
// right hand
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_MPRV, KC_MNXT,
|
||||
KC_VOLU,
|
||||
KC_VOLD, KC_MUTE, KC_MPLY
|
||||
),
|
||||
/* Keymap 3: Control Layer
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | Sleep | | | | | | Pwr | | | | | | | | |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | | | | MsUp | | | | | | | | | | | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | |MsLeft|MsDown|MsRght| Lclk |------| |------| Lft | Down | Up | Right| | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | | | | | Rclk | | | | | | | | | |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | | | | | | | | | | | |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | | | | | |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | | | | | |
|
||||
* | | |------| |------| | |
|
||||
* | | | | | | | |
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
// Control
|
||||
[CNTL] = KEYMAP(
|
||||
KC_SLEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PWR,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN1,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN2, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
// right hand
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[1] = ACTION_LAYER_TAP_TOGGLE(SYMB),
|
||||
[2] = ACTION_LAYER_TAP_TOGGLE(MDIA),
|
||||
[3] = ACTION_LAYER_TAP_TOGGLE(CNTL) // FN1 - Momentary Layer 1 (Symbols)
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
// Runs just one time when the keyboard initializes.
|
||||
void matrix_init_user(void) {
|
||||
|
||||
};
|
||||
|
||||
// Runs constantly in the background, in a loop.
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
uint8_t layer = biton32(layer_state);
|
||||
|
||||
ergodox_board_led_off();
|
||||
ergodox_right_led_1_off();
|
||||
ergodox_right_led_2_off();
|
||||
ergodox_right_led_3_off();
|
||||
switch (layer) {
|
||||
// TODO: Make this relevant to the ErgoDox EZ.
|
||||
case 1:
|
||||
ergodox_right_led_1_on();
|
||||
break;
|
||||
case 2:
|
||||
ergodox_right_led_2_on();
|
||||
break;
|
||||
case 3:
|
||||
ergodox_right_led_3_on();
|
||||
break;
|
||||
default:
|
||||
// none
|
||||
break;
|
||||
}
|
||||
|
||||
};
|
@ -0,0 +1,36 @@
|
||||
# Techtomas Configuration
|
||||
|
||||
## Base Layer
|
||||
|
||||
The base layer is a merge of what I liked with the default layout and the ordinary layout. The thumb cluster is more like the Kinesis advantage and the top row of the cluster is convient for use on the mac.
|
||||
|
||||
* The Caps Lock postion handles [Hyper/Esc](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)
|
||||
* The Tab key toggles MEH.
|
||||
* The two vertical mods on the left board are Shift+Tab and Tab.
|
||||
* The two vertical mods on the right board are Control Layer tap/toggle and Alt+Cmd.
|
||||
* The HYPER and MEH key are made in the same location on the right side of the board as well. Using Keyboard Maestro for OS X makes one-handed shortcuts very easy.
|
||||
|
||||
## Symbol Layer
|
||||
The symbol layer can be tap/toggled through the bottom right key and also toggled holding the tilde/grave key in the upper left corner. I haven't used the symbol layer enough to tell if this was a good place or not but it made sense in my head
|
||||
|
||||
The bottom two vertical mods are set to F14 and F15 which is the default for changing screen brightness on the mac
|
||||
|
||||
## Media Layer
|
||||
/ & ; will toggle the media layer which has play and volume controls assigned to the thumb cluster. I found this an easy way to quickly play/pause
|
||||
|
||||
## Control Layer
|
||||
The a and z keys toggle the control layer.
|
||||
|
||||
On the left board you have mouse control with left & right click in the location of the G and B keys.
|
||||
On the right board you have vim-style arrow keys using hjkl
|
||||
|
||||
The thumb cluster and mods all pass down to this layer.
|
||||
|
||||
## Changelog
|
||||
|
||||
* Apr 29, 2016 (V1.1):
|
||||
* Added F14 and F15 to symbol layer
|
||||
* Added control layer toggle to A key.
|
||||
|
||||
* Apr 28, 2016 (V1.0):
|
||||
* Modified config based on the default layout plus inspiration from the ordinary layout
|
@ -0,0 +1,187 @@
|
||||
#include "ergodox_ez.h"
|
||||
#include "debug.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
#define BASE 0 // default layer
|
||||
#define SYMB 1 // symbols
|
||||
#define MDIA 2 // media keys
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap 0: Basic layer
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | = | 1 | 2 | 3 | 4 | 5 | ← | | → | 6 | 7 | 8 | 9 | 0 | - |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | ⌦ | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | ⌫ | A | S | D | F | G |------| |------| H | J | K | L |; / L2| ' / L⌘ |
|
||||
* |--------+------+------+------+------+------| L⌘ | | L⌘ |------+------+------+------+------+--------|
|
||||
* | L⇧ | Z | X | C | V | B | | | | N | M | , | . | / / ⌃| R⇧ |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | L⌃ | L⌥ | L⌘ | ← | → | | ↑ | ↓ | [ | ] | ~L1 |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,---------------.
|
||||
* | `~ | '" | | ⎋ | ⌫ |
|
||||
* ,------|------|------| |------+--------+------.
|
||||
* | | | PgUp | | PgDn | | |
|
||||
* | | ⌫ |------| |------| ⇥ |Enter |
|
||||
* | | | L⌥ | | L⌃ | | |
|
||||
* `--------------------' `----------------------'
|
||||
*/
|
||||
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
|
||||
// Otherwise, it needs KC_*
|
||||
[BASE] = KEYMAP( // layer 0 : default
|
||||
// left hand
|
||||
KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT,
|
||||
KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB),
|
||||
KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LGUI,
|
||||
KC_LCTL, KC_LALT, KC_LGUI,KC_LEFT,KC_RGHT,
|
||||
KC_GRV, KC_QUOT,
|
||||
KC_PGUP,
|
||||
KC_SPC,KC_BSPC,KC_LALT,
|
||||
// right hand
|
||||
KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
|
||||
TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
|
||||
KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
|
||||
KC_LGUI, KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT,
|
||||
KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1,
|
||||
KC_ESC, KC_BSPC,
|
||||
KC_PGDN,
|
||||
KC_LCTL, KC_TAB, KC_ENT
|
||||
),
|
||||
/* Keymap 1: Symbol Layer
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | | [ | ] | { | } | | | | | / | 7 | 8 | 9 | * | F12 |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | < | > | ( | ) | |------| |------| - | 4 | 5 | 6 | + | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | | | | | | | | | & | 1 | 2 | 3 | = | |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | | | | | | | 0 | . | ← | → | |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | | | | | |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | | | Home | | |
|
||||
* | | |------| |------| | |
|
||||
* | | | | | End | | |
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
// SYMBOLS
|
||||
[SYMB] = KEYMAP(
|
||||
// left hand
|
||||
KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS,
|
||||
KC_TRNS,KC_LBRC,KC_RBRC,KC_LCBR,KC_RCBR,KC_TRNS,KC_TRNS,
|
||||
KC_TRNS,KC_LABK,KC_RABK,KC_LPRN,KC_RPRN,KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,
|
||||
// right hand
|
||||
KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
|
||||
KC_TRNS, KC_SLSH, KC_7, KC_8, KC_9, KC_ASTR, KC_F12,
|
||||
KC_MINS, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS,
|
||||
KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_EQL, KC_TRNS,
|
||||
KC_0, KC_DOT, KC_LEFT, KC_RGHT, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_HOME,
|
||||
KC_END , KC_TRNS, KC_TRNS
|
||||
),
|
||||
/* Keymap 2: Media keys
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | | F14 | F15 | | | | | | ⌘Q | ⌘W | ⌘⇧` | ⌘` | ⌥⇧⇥ | ⌥⇥ | Power |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | | | | PgUp | | | | | | ⌘] | ⌥⌘↑ | ↑ | ⌥⌘↓ | | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | | Home | PgDn | End | |------| |------| ⌘[ | ← | ↓ | → | | ⏯ |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | | | | | | | | |L⇧+Spc| Spc | ⏮ | ⏭ | | |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | | | | | | |VolUp |VolDn | Mute | | |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | | | | | |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | | | | | |
|
||||
* | | |------| |------| ⌘C | ⌘V |
|
||||
* | | | | | ⌘X | | |
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
// MEDIA AND MOUSE
|
||||
[MDIA] = KEYMAP(
|
||||
KC_TRNS, KC_F14 , KC_F15 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, /* F14 dims screen, F15 brightens */
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END , KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
// right hand
|
||||
LGUI(KC_Q), LGUI(KC_W), LGUI(LSFT(KC_GRV)), LGUI(KC_GRV), LALT(LSFT(KC_TAB)), LALT(KC_TAB), KC_PWR,
|
||||
KC_TRNS, LGUI(KC_RBRC), LGUI(LALT(KC_UP)), KC_UP , LGUI(LALT(KC_DOWN)), KC_TRNS, KC_TRNS,
|
||||
LGUI(KC_LBRC), KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_MPLY,
|
||||
KC_TRNS, LSFT(KC_SPC), KC_SPC , KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
|
||||
KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
LGUI(KC_X), LGUI(KC_C), LGUI(KC_V)
|
||||
),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols)
|
||||
};
|
||||
|
||||
// action_get_macro() is unused — remove the “#if 0” and “#endif” lines to reenable
|
||||
#if 0
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
#endif
|
||||
|
||||
// Runs just one time when the keyboard initializes.
|
||||
void matrix_init_user(void) {
|
||||
|
||||
};
|
||||
|
||||
// Runs constantly in the background, in a loop.
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
uint8_t layer = biton32(layer_state);
|
||||
|
||||
ergodox_board_led_off();
|
||||
ergodox_right_led_1_off();
|
||||
ergodox_right_led_2_off();
|
||||
ergodox_right_led_3_off();
|
||||
switch (layer) {
|
||||
// TODO: Make this relevant to the ErgoDox EZ.
|
||||
case 1:
|
||||
ergodox_right_led_1_on();
|
||||
break;
|
||||
case 2:
|
||||
ergodox_right_led_2_on();
|
||||
break;
|
||||
default:
|
||||
// none
|
||||
break;
|
||||
}
|
||||
|
||||
};
|
@ -0,0 +1,140 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = gh60
|
||||
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
TMK_DIR = ../../tmk_core
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# # project specific files
|
||||
SRC = gh60.c
|
||||
|
||||
ifdef KEYMAP
|
||||
SRC := keymaps/$(KEYMAP).c $(SRC)
|
||||
else
|
||||
SRC := keymaps/default.c $(SRC)
|
||||
endif
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE = YES # MIDI controls
|
||||
# UNICODE_ENABLE = YES # Unicode
|
||||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
|
||||
# Optimize size but this may cause error "relocation truncated to fit"
|
||||
#EXTRALDFLAGS = -Wl,--relax
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
VPATH += $(TMK_DIR)
|
||||
|
||||
include $(TOP_DIR)/quantum/quantum.mk
|
||||
|
@ -0,0 +1,60 @@
|
||||
## gh60 Rev C keyboard firmware
|
||||
|
||||
![gh60 Rev C PCB](gh60revc.jpg)
|
||||
|
||||
/* Column pin configuration
|
||||
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
|
||||
* pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
|
||||
*/
|
||||
|
||||
/* Row pin configuration
|
||||
* row: 0 1 2 3 4
|
||||
* pin: D0 D1 D2 D3 D5
|
||||
*/
|
||||
|
||||
GPIO pads
|
||||
0 F7 WASD LEDs
|
||||
1 F6 ESC LED
|
||||
2 F5 FN LED
|
||||
3 F4 POKER Arrow LEDs
|
||||
|
||||
B2 Capslock LED
|
||||
B0 not connected
|
||||
|
||||
Functions to controls LED clusters
|
||||
|
||||
gh60_caps_led_on()
|
||||
gh60_poker_leds_on()
|
||||
gh60_fn_led_on()
|
||||
gh60_esc_led_on()
|
||||
gh60_wasd_leds_on()
|
||||
|
||||
gh60_caps_led_off()
|
||||
gh60_poker_leds_off()
|
||||
gh60_fn_led_off()
|
||||
gh60_esc_led_off()
|
||||
gh60_wasd_leds_off()
|
||||
|
||||
======================
|
||||
|
||||
## Quantum MK Firmware
|
||||
|
||||
For the full Quantum feature list, see [the parent README.md](/README.md).
|
||||
|
||||
## Building
|
||||
|
||||
Download or clone the whole firmware and navigate to the keyboard/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||
|
||||
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||
|
||||
### Default
|
||||
To build with the default keymap, simply run `make`.
|
||||
|
||||
### Other Keymaps
|
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top README.md) and existent keymap files.
|
||||
|
||||
To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
|
||||
```
|
||||
$ make KEYMAP=[default|jack|<name>]
|
||||
```
|
||||
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
|
@ -0,0 +1,157 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER You
|
||||
#define PRODUCT gh60
|
||||
#define DESCRIPTION A custom keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 14
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define COLS (int []){ F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
|
||||
#define ROWS (int []){ D0, D1, D2, D3, D5 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
@ -0,0 +1,67 @@
|
||||
#include "gh60.h"
|
||||
#include "led.h"
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_user(void) {
|
||||
// leave this function blank - it can be defined in a keymap file
|
||||
};
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
// leave this function blank - it can be defined in a keymap file
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void process_action_user(keyrecord_t *record) {
|
||||
// leave this function blank - it can be defined in a keymap file
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
// leave this function blank - it can be defined in a keymap file
|
||||
}
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
void process_action_kb(keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
process_action_user(record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
gh60_caps_led_on();
|
||||
} else {
|
||||
gh60_caps_led_off();
|
||||
}
|
||||
|
||||
// if (usb_led & (1<<USB_LED_NUM_LOCK)) {
|
||||
// gh60_esc_led_on();
|
||||
// } else {
|
||||
// gh60_esc_led_off();
|
||||
// }
|
||||
|
||||
// if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
|
||||
// gh60_fn_led_on();
|
||||
// } else {
|
||||
// gh60_fn_led_off();
|
||||
// }
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
@ -0,0 +1,81 @@
|
||||
#ifndef GH60_H
|
||||
#define GH60_H
|
||||
|
||||
#include "matrix.h"
|
||||
#include "keymap_common.h"
|
||||
#include "backlight.h"
|
||||
#include <stddef.h>
|
||||
|
||||
/* GH60 LEDs
|
||||
* GPIO pads
|
||||
* 0 F7 WASD LEDs
|
||||
* 1 F6 ESC LED
|
||||
* 2 F5 FN LED
|
||||
* 3 F4 POKER Arrow LEDs
|
||||
* B2 Capslock LED
|
||||
* B0 not connected
|
||||
*/
|
||||
inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
|
||||
inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); }
|
||||
inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); }
|
||||
inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); }
|
||||
inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); }
|
||||
|
||||
inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
|
||||
inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
|
||||
inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
|
||||
inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
|
||||
inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
|
||||
|
||||
/* GH60 keymap definition macro
|
||||
* K2C, K31 and K3C are extra keys for ISO
|
||||
*/
|
||||
#define KEYMAP( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
|
||||
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
|
||||
) { \
|
||||
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
|
||||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
|
||||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
|
||||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
|
||||
{ KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \
|
||||
}
|
||||
|
||||
/* ANSI valiant. No extra keys for ISO */
|
||||
#define KEYMAP_ANSI( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
|
||||
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
|
||||
K40, K41, K42, K45, K4A, K4B, K4C, K4D \
|
||||
) KEYMAP( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
|
||||
K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \
|
||||
K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \
|
||||
)
|
||||
|
||||
#define KEYMAP_HHKB( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
|
||||
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
|
||||
K40, K41, K42, K45, K4A, K4B, K4C, K4D \
|
||||
) KEYMAP( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
|
||||
K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
|
||||
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
|
||||
)
|
||||
|
||||
void matrix_init_user(void);
|
||||
void matrix_scan_user(void);
|
||||
void process_action_user(keyrecord_t *record);
|
||||
void led_set_user(uint8_t usb_led);
|
||||
|
||||
#endif
|
After Width: | Height: | Size: 1.4 MiB |
@ -0,0 +1,69 @@
|
||||
#include "gh60.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* 0: qwerty */
|
||||
KEYMAP(
|
||||
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, GRV, \
|
||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \
|
||||
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NO, ENT, \
|
||||
LSFT,FN1, Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, RSFT, \
|
||||
LCTL,LGUI,LALT, SPC, BSLS,RALT,RGUI,APP, RCTL),
|
||||
/* 1: fn */
|
||||
KEYMAP(
|
||||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, \
|
||||
TRNS,TRNS,UP, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS),
|
||||
/* 2: arrows */
|
||||
KEYMAP(
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,UP, \
|
||||
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,LEFT,DOWN,RGHT),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
|
||||
[1] = ACTION_LAYER_TOGGLE(2), // toggle arrow overlay
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
//Layer LED indicators
|
||||
uint32_t layer = layer_state;
|
||||
|
||||
if (layer & (1<<1)) {
|
||||
gh60_wasd_leds_on();
|
||||
gh60_fn_led_on();
|
||||
} else {
|
||||
gh60_wasd_leds_off();
|
||||
gh60_fn_led_off();
|
||||
}
|
||||
|
||||
if (layer & (1<<2)) {
|
||||
gh60_poker_leds_on();
|
||||
gh60_esc_led_on();
|
||||
} else {
|
||||
gh60_poker_leds_off();
|
||||
gh60_esc_led_off();
|
||||
}
|
||||
|
||||
};
|
@ -0,0 +1,18 @@
|
||||
/* Column pin configuration
|
||||
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
|
||||
* pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
|
||||
*/
|
||||
|
||||
/* Row pin configuration
|
||||
* row: 0 1 2 3 4
|
||||
* pin: D0 D1 D2 D3 D5
|
||||
*/
|
||||
|
||||
GPIO pads
|
||||
0 F7 WASD LEDs
|
||||
1 F6 ESC LED
|
||||
2 F5 FN LED
|
||||
3 F4 POKER Arrow LEDs
|
||||
|
||||
B2 Capslock LED
|
||||
B0 not connected
|
@ -1,61 +0,0 @@
|
||||
|
||||
#include <avr/io.h>
|
||||
#include "backlight.h"
|
||||
|
||||
#define CHANNEL OCR1C
|
||||
|
||||
void backlight_init_ports()
|
||||
{
|
||||
|
||||
// Setup PB7 as output and output low.
|
||||
DDRB |= (1<<7);
|
||||
PORTB &= ~(1<<7);
|
||||
|
||||
// Use full 16-bit resolution.
|
||||
ICR1 = 0xFFFF;
|
||||
|
||||
// I could write a wall of text here to explain... but TL;DW
|
||||
// Go read the ATmega32u4 datasheet.
|
||||
// And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
|
||||
|
||||
// Pin PB7 = OCR1C (Timer 1, Channel C)
|
||||
// Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
|
||||
// (i.e. start high, go low when counter matches.)
|
||||
// WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
|
||||
// Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
|
||||
|
||||
TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
|
||||
TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
|
||||
|
||||
backlight_init();
|
||||
}
|
||||
|
||||
void backlight_set(uint8_t level)
|
||||
{
|
||||
if ( level == 0 )
|
||||
{
|
||||
// Turn off PWM control on PB7, revert to output low.
|
||||
TCCR1A &= ~(_BV(COM1C1));
|
||||
CHANNEL = 0x0;
|
||||
// Prevent backlight blink on lowest level
|
||||
PORTB &= ~(_BV(PORTB7));
|
||||
}
|
||||
else if ( level == BACKLIGHT_LEVELS )
|
||||
{
|
||||
// Prevent backlight blink on lowest level
|
||||
PORTB &= ~(_BV(PORTB7));
|
||||
// Turn on PWM control of PB7
|
||||
TCCR1A |= _BV(COM1C1);
|
||||
// Set the brightness
|
||||
CHANNEL = 0xFFFF;
|
||||
}
|
||||
else
|
||||
{
|
||||
// Prevent backlight blink on lowest level
|
||||
PORTB &= ~(_BV(PORTB7));
|
||||
// Turn on PWM control of PB7
|
||||
TCCR1A |= _BV(COM1C1);
|
||||
// Set the brightness
|
||||
CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
|
||||
}
|
||||
}
|
@ -0,0 +1,2 @@
|
||||
# The Default Planck Layout
|
||||
|
@ -0,0 +1,383 @@
|
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
// this is the style you want to emulate.
|
||||
|
||||
#include "planck.h"
|
||||
#include "action_layer.h"
|
||||
#ifdef AUDIO_ENABLE
|
||||
#include "audio.h"
|
||||
#endif
|
||||
#include "eeconfig.h"
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _QWERTY 0
|
||||
#define _COLEMAK 1
|
||||
#define _DVORAK 2
|
||||
#define _LOWER 3
|
||||
#define _RAISE 4
|
||||
#define _MUSIC 5
|
||||
#define _PLOVER 6
|
||||
#define _ADJUST 16
|
||||
|
||||
// Macro name shortcuts
|
||||
#define QWERTY M(_QWERTY)
|
||||
#define COLEMAK M(_COLEMAK)
|
||||
#define DVORAK M(_DVORAK)
|
||||
#define LOWER M(_LOWER)
|
||||
#define RAISE M(_RAISE)
|
||||
#define M_BL 5
|
||||
#define AUD_OFF M(6)
|
||||
#define AUD_ON M(7)
|
||||
#define MUS_OFF M(8)
|
||||
#define MUS_ON M(9)
|
||||
#define VC_IN M(10)
|
||||
#define VC_DE M(11)
|
||||
#define PLOVER M(12)
|
||||
#define EXT_PLV M(13)
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* Qwerty
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Esc | A | S | D | F | G | H | J | K | L | ; | " |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_QWERTY] = {
|
||||
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
|
||||
{KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
|
||||
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
|
||||
{M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
|
||||
},
|
||||
|
||||
/* Colemak
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Esc | A | R | S | T | D | H | N | E | I | O | " |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_COLEMAK] = {
|
||||
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
|
||||
{KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
|
||||
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
|
||||
{M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
|
||||
},
|
||||
|
||||
/* Dvorak
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Esc | A | O | E | U | I | D | H | T | N | S | / |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_DVORAK] = {
|
||||
{KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC},
|
||||
{KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH},
|
||||
{KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT },
|
||||
{M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
|
||||
},
|
||||
|
||||
/* Lower
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 | | | | |Enter |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_LOWER] = {
|
||||
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
|
||||
{KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
|
||||
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______},
|
||||
{_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
|
||||
},
|
||||
|
||||
/* Raise
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 | | | | |Enter |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RAISE] = {
|
||||
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
|
||||
{KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
|
||||
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______},
|
||||
{_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
|
||||
},
|
||||
|
||||
/* Music (reserved for process_action_user)
|
||||
*
|
||||
*/
|
||||
[_MUSIC] = {
|
||||
{XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
|
||||
{XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
|
||||
{XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
|
||||
{XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, LOWER, XXXXXXX, XXXXXXX, RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}
|
||||
},
|
||||
|
||||
/* Plover layer (http://opensteno.org)
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | # | # | # | # | # | # | # | # | # | # | # | # |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | | S | T | P | H | * | * | F | P | L | T | D |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | | S | K | W | R | * | * | R | B | G | S | Z |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Exit | | | A | O | | E | U | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_PLOVER] = {
|
||||
{KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 },
|
||||
{XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC},
|
||||
{XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
|
||||
{EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX}
|
||||
},
|
||||
|
||||
/* Adjust (Lower + Raise)
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | | Reset| | | | | | | | | | Del |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | |Voice-|Voice+|Mus on|Musoff| | | | | | | |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_ADJUST] = {
|
||||
{_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
|
||||
{_______, _______, _______, AUD_ON, AUD_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______},
|
||||
{_______, VC_DE, VC_IN, MUS_ON, MUS_OFF, _______, _______, _______, _______, _______, _______, _______},
|
||||
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
|
||||
}
|
||||
|
||||
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
float tone_startup[][2] = {
|
||||
{440.0*pow(2.0,(31)/12.0), 12},
|
||||
{440.0*pow(2.0,(28)/12.0), 8},
|
||||
{440.0*pow(2.0,(19)/12.0), 8},
|
||||
{440.0*pow(2.0,(24)/12.0), 8},
|
||||
{440.0*pow(2.0,(28)/12.0), 20}
|
||||
};
|
||||
|
||||
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
|
||||
float tone_dvorak[][2] = SONG(DVORAK_SOUND);
|
||||
float tone_colemak[][2] = SONG(COLEMAK_SOUND);
|
||||
float tone_plover[][2] = SONG(PLOVER_SOUND);
|
||||
float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND);
|
||||
|
||||
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
|
||||
float goodbye[][2] = SONG(GOODBYE_SOUND);
|
||||
#endif
|
||||
|
||||
|
||||
void persistant_default_layer_set(uint16_t default_layer) {
|
||||
eeconfig_update_default_layer(default_layer);
|
||||
default_layer_set(default_layer);
|
||||
}
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
switch(id) {
|
||||
case _QWERTY:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
|
||||
#endif
|
||||
persistant_default_layer_set(1UL<<_QWERTY);
|
||||
}
|
||||
break;
|
||||
case _COLEMAK:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_NOTE_ARRAY(tone_colemak, false, 0);
|
||||
#endif
|
||||
persistant_default_layer_set(1UL<<_COLEMAK);
|
||||
}
|
||||
break;
|
||||
case _DVORAK:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
|
||||
#endif
|
||||
persistant_default_layer_set(1UL<<_DVORAK);
|
||||
}
|
||||
break;
|
||||
case _LOWER:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_LOWER);
|
||||
breathing_speed_set(2);
|
||||
breathing_pulse();
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
break;
|
||||
case _RAISE:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_RAISE);
|
||||
breathing_speed_set(2);
|
||||
breathing_pulse();
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
break;
|
||||
case M_BL:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
backlight_step();
|
||||
#endif
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
case 6:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
audio_off();
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
case 7:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
audio_on();
|
||||
PLAY_NOTE_ARRAY(tone_startup, false, 0);
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
case 8:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
layer_off(_MUSIC);
|
||||
stop_all_notes();
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
case 9:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_NOTE_ARRAY(music_scale, false, 0);
|
||||
layer_on(_MUSIC);
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
case 10:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
voice_iterate();
|
||||
PLAY_NOTE_ARRAY(music_scale, false, 0);
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
case 11:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
voice_deiterate();
|
||||
PLAY_NOTE_ARRAY(music_scale, false, 0);
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
case 12:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
stop_all_notes();
|
||||
PLAY_NOTE_ARRAY(tone_plover, false, 0);
|
||||
#endif
|
||||
layer_off(_RAISE);
|
||||
layer_off(_LOWER);
|
||||
layer_off(_ADJUST);
|
||||
layer_off(_MUSIC);
|
||||
layer_on(_PLOVER);
|
||||
if (!eeconfig_is_enabled()) {
|
||||
eeconfig_init();
|
||||
}
|
||||
keymap_config.raw = eeconfig_read_keymap();
|
||||
keymap_config.nkro = 1;
|
||||
eeconfig_update_keymap(keymap_config.raw);
|
||||
}
|
||||
break;
|
||||
case 13:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
|
||||
#endif
|
||||
layer_off(_PLOVER);
|
||||
}
|
||||
break;
|
||||
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
void matrix_init_user(void) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
_delay_ms(20); // stops the tick
|
||||
PLAY_NOTE_ARRAY(tone_startup, false, 0);
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
void play_goodbye_tone()
|
||||
{
|
||||
PLAY_NOTE_ARRAY(goodbye, false, 0);
|
||||
_delay_ms(150);
|
||||
}
|
||||
|
||||
uint8_t starting_note = 0x0C;
|
||||
int offset = 0;
|
||||
|
||||
void process_action_user(keyrecord_t *record) {
|
||||
|
||||
if (IS_LAYER_ON(_MUSIC)) {
|
||||
if (record->event.pressed) {
|
||||
play_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)), 0xF);
|
||||
} else {
|
||||
stop_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)));
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
#endif
|
@ -0,0 +1,2 @@
|
||||
AUDIO_ENABLE = yes
|
||||
NKRO_ENABLE = yes
|
@ -0,0 +1,88 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Ortholinear Keyboards
|
||||
#define PRODUCT The Planck Keyboard
|
||||
#define DESCRIPTION A compact ortholinear keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 12
|
||||
|
||||
/* Planck PCB default pin-out */
|
||||
#define COLS (int []){ F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
|
||||
#define ROWS (int []){ D0, D5, B5, B6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* ws2812 RGB LED */
|
||||
#define ws2812_PORTREG PORTD
|
||||
#define ws2812_DDRREG DDRD
|
||||
#define ws2812_pin PD1
|
||||
#define RGBLED_NUM 28 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
@ -0,0 +1,547 @@
|
||||
#include "planck.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
#include "led.h"
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
#include "audio.h"
|
||||
#include "song_list.h"
|
||||
#endif
|
||||
|
||||
#define LAYER_QWERTY 0
|
||||
#define LAYER_COLEMAK 1
|
||||
#define LAYER_DVORAK 2
|
||||
#define LAYER_LOWER 3
|
||||
#define LAYER_RAISE 4
|
||||
#define LAYER_FUNCTION 5
|
||||
#define LAYER_MOUSE 6
|
||||
#define LAYER_MUSIC 7
|
||||
#define LAYER_ADJUST 8
|
||||
|
||||
#define MACRO_QWERTY 0
|
||||
#define MACRO_COLEMAK 1
|
||||
#define MACRO_DVORAK 2
|
||||
#define MACRO_LOWER 3
|
||||
#define MACRO_RAISE 4
|
||||
#define MACRO_FUNCTION 5
|
||||
#define MACRO_MOUSE 6
|
||||
#define MACRO_TIMBRE_1 7
|
||||
#define MACRO_TIMBRE_2 8
|
||||
#define MACRO_TIMBRE_3 9
|
||||
#define MACRO_TIMBRE_4 10
|
||||
#define MACRO_TEMPO_U 11
|
||||
#define MACRO_TEMPO_D 12
|
||||
#define MACRO_TONE_DEFAULT 13
|
||||
#define MACRO_MUSIC_ON 14
|
||||
#define MACRO_MUSIC_OFF 15
|
||||
#define MACRO_AUDIO_ON 16
|
||||
#define MACRO_AUDIO_OFF 17
|
||||
#define MACRO_INC_VOICE 18
|
||||
#define MACRO_DEC_VOICE 19
|
||||
#define MACRO_BACKLIGHT 20
|
||||
|
||||
#define M_QWRTY M(MACRO_QWERTY)
|
||||
#define M_COLMK M(MACRO_COLEMAK)
|
||||
#define M_DVORK M(MACRO_DVORAK)
|
||||
#define M_LOWER M(MACRO_LOWER)
|
||||
#define M_RAISE M(MACRO_RAISE)
|
||||
#define M_FUNCT M(MACRO_FUNCTION)
|
||||
#define M_MOUSE M(MACRO_MOUSE)
|
||||
#define TIMBR_1 M(MACRO_TIMBRE_1)
|
||||
#define TIMBR_2 M(MACRO_TIMBRE_2)
|
||||
#define TIMBR_3 M(MACRO_TIMBRE_3)
|
||||
#define TIMBR_4 M(MACRO_TIMBRE_4)
|
||||
#define TMPO_UP M(MACRO_TEMPO_U)
|
||||
#define TMPO_DN M(MACRO_TEMPO_D)
|
||||
#define TMPO_DF M(MACRO_TONE_DEFAULT)
|
||||
#define M_BACKL M(MACRO_BACKLIGHT)
|
||||
|
||||
|
||||
#define MUS_ON M(MACRO_MUSIC_ON)
|
||||
#define MUS_OFF M(MACRO_MUSIC_OFF)
|
||||
#define AUD_OFF M(MACRO_AUDIO_OFF)
|
||||
#define AUD_ON M(MACRO_AUDIO_ON)
|
||||
#define VC_UP M(MACRO_INC_VOICE)
|
||||
#define VC_DOWN M(MACRO_DEC_VOICE)
|
||||
|
||||
|
||||
#define SC_UNDO LCTL(KC_Z)
|
||||
#define SC_REDO LCTL(KC_Y)
|
||||
#define SC_CUT LCTL(KC_X)
|
||||
#define SC_COPY LCTL(KC_C)
|
||||
#define SC_PSTE LCTL(KC_V)
|
||||
#define SC_SELA LCTL(KC_A)
|
||||
#define SC_SAVE LCTL(KC_S)
|
||||
#define SC_OPEN LCTL(KC_O)
|
||||
#define SC_ACLS LALT(KC_F4)
|
||||
#define SC_CCLS LCTL(KC_F4)
|
||||
|
||||
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
#define ________________ _______, _______
|
||||
#define XXXXXXXXXXXXXXXX XXXXXXX, XXXXXXX
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* QWERTY
|
||||
* .-----------------------------------------------------------------------------------------------------------.
|
||||
* | TAB | Q | W | E | R | T | Y | U | I | O | P | BACKSP |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | ESC | A | S | D | F | G | H | J | K | L | ; | ' |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | LSHIFT | Z | X | C | V | B | N | M | , | . | / | ENTER |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | LCTRL | LWIN | FN | LALT | RAISE | SPACE | SPACE | LOWER | UP | DOWN | LEFT | RIGHT |
|
||||
* '-----------------------------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[LAYER_QWERTY] = { /* QWERTY */
|
||||
{ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC },
|
||||
{ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT },
|
||||
{ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
|
||||
{ KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_RAISE, KC_SPC, KC_SPC, M_LOWER, KC_UP, KC_DOWN, KC_LEFT, KC_RGHT },
|
||||
},
|
||||
|
||||
/* COLEMAK
|
||||
* .-----------------------------------------------------------------------------------------------------------.
|
||||
* | TAB | Q | W | F | P | G | J | L | U | Y | ; | ESC |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | BACKSP | A | R | S | T | D | H | N | E | I | O | ' |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | LSHIFT | Z | X | C | V | B | K | M | , | . | / | ENTER |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | LCTRL | LWIN | FN | LALT | RAISE | SPACE | SPACE | LOWER | UP | DOWN | LEFT | RIGHT |
|
||||
* '-----------------------------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[LAYER_COLEMAK] = { /* COLEMAK */
|
||||
{ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_ESC },
|
||||
{ KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT },
|
||||
{ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
|
||||
{ KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_RAISE, KC_SPC, KC_SPC, M_LOWER, KC_UP, KC_DOWN, KC_LEFT, KC_RGHT },
|
||||
},
|
||||
|
||||
/* DVORAK
|
||||
* .-----------------------------------------------------------------------------------------------------------.
|
||||
* | TAB | ' | , | . | P | Y | F | G | C | R | L | BACKSP |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | ESC | A | O | E | U | I | D | H | T | N | S | ' |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | LSHIFT | ; | Q | J | K | X | B | M | W | V | Z | ENTER |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | LCTRL | LWIN | FN | LALT | RAISE | SPACE | SPACE | LOWER | UP | DOWN | LEFT | RIGHT |
|
||||
* '-----------------------------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[LAYER_DVORAK] = { /* DVORAK */
|
||||
{ KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC },
|
||||
{ KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH },
|
||||
{ KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT },
|
||||
{ KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_RAISE, KC_SPC, KC_SPC, M_LOWER, KC_UP, KC_DOWN, KC_LEFT, KC_RGHT },
|
||||
},
|
||||
|
||||
/* Raise
|
||||
* .-----------------------------------------------------------------------------------------------------------.
|
||||
* | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | DEL |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | XXXXXX | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | [ | ] | \ |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | LSHIFT | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX | XXXXXX | XXXXXX | XXXXXX | ENTER |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | LCTRL | LWIN | FN | LALT | RAISE | BACKSP | BACKSP | LOWER | PG UP | PG DN | HOME | END |
|
||||
* '-----------------------------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[LAYER_RAISE] = { /* RAISED */
|
||||
{ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL },
|
||||
{ XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS },
|
||||
{ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX },
|
||||
{ _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_PGUP, KC_PGDN, KC_HOME, KC_END },
|
||||
},
|
||||
|
||||
|
||||
/* LOWERED
|
||||
* .-----------------------------------------------------------------------------------------------------------.
|
||||
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | INS |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | XXXXXX | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | LSHIFT | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX | XXXXXX | XXXXXX | XXXXXX | ENTER |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | LCTRL | LWIN | FN | LALT | RAISE | BACKSP | BACKSP | LOWER | PG UP | PG DN | HOME | END |
|
||||
* '-----------------------------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[LAYER_LOWER] = { /* LOWERED */
|
||||
{ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_INS },
|
||||
{ XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS },
|
||||
{ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX },
|
||||
{ _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_PGUP, KC_PGDN, KC_HOME, KC_END },
|
||||
},
|
||||
|
||||
/* FUNCTION
|
||||
* .-----------------------------------------------------------------------------------------------------------.
|
||||
* | NUM LK | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | PAUSE |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | CAP LK | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | PRINT |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | SCR LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | MUTE |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
|
||||
* | LCTRL | LWIN | FN | LALT | RAISE | PLAY | PLAY | LOWER | VOL UP | VOL DN | NEXT | PREV |
|
||||
* '-----------------------------------------------------------------------------------------------------------'
|
||||
*/
|
||||
[LAYER_FUNCTION] = { /* FUNCTION */
|
||||
{ KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_PAUS },
|
||||
{ KC_CAPS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_PSCR },
|
||||
{ KC_SLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE },
|
||||
{ _______, _______, _______, _______, _______, KC_MPLY, KC_MPLY, _______, KC_VOLU, KC_VOLD, KC_MPRV, KC_MNXT },
|
||||
},
|
||||
|
||||
#ifdef MOUSEKEY_ENABLE
|
||||
|
||||
[LAYER_MOUSE] = { /* MOUSE */
|
||||
{ KC_ESC, KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_ESC },
|
||||
{ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX },
|
||||
{ _______, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_U, KC_WH_D },
|
||||
{ _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, KC_MS_U, KC_MS_D, KC_MS_L, KC_MS_R },
|
||||
},
|
||||
|
||||
#endif
|
||||
|
||||
[LAYER_MUSIC] = { /* MUSIC */
|
||||
{ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX },
|
||||
{ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX },
|
||||
{ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX },
|
||||
{ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_RAISE, XXXXXXX, XXXXXXX, M_LOWER, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX },
|
||||
},
|
||||
|
||||
[LAYER_ADJUST] = { /* ADJUST */
|
||||
{ _______, TIMBR_1, TIMBR_2, TIMBR_3, TIMBR_4, TMPO_UP, TMPO_DN, TMPO_DF, MUS_ON, MUS_OFF, AUD_ON, AUD_OFF },
|
||||
{ _______, M_QWRTY, M_COLMK, M_DVORK, _______, _______, _______, _______, _______, _______, _______, _______ },
|
||||
{ _______, _______, _______, _______, M_BACKL, RESET, _______, M_MOUSE, _______, _______, _______, _______ },
|
||||
{ _______, _______, _______, _______, _______, _______, _______, _______, VC_UP, VC_DOWN, _______, _______ },
|
||||
},
|
||||
|
||||
|
||||
/*
|
||||
[LAYER_EMPTY] = {
|
||||
{ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, },
|
||||
{ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, },
|
||||
{ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, },
|
||||
{ _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, },
|
||||
},
|
||||
*/
|
||||
|
||||
};
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
|
||||
float tone_my_startup[][2] = SONG(ODE_TO_JOY);
|
||||
float tone_my_goodbye[][2] = SONG(ROCK_A_BYE_BABY);
|
||||
|
||||
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
|
||||
float tone_dvorak[][2] = SONG(DVORAK_SOUND);
|
||||
float tone_colemak[][2] = SONG(COLEMAK_SOUND);
|
||||
|
||||
float tone_audio_on[][2] = SONG(CLOSE_ENCOUNTERS_5_NOTE);
|
||||
float tone_music_on[][2] = SONG(DOE_A_DEER);
|
||||
float tone_caps_on[][2] = SONG(CAPS_LOCK_ON_SOUND);
|
||||
float tone_caps_off[][2] = SONG(CAPS_LOCK_OFF_SOUND);
|
||||
float tone_numlk_on[][2] = SONG(NUM_LOCK_ON_SOUND);
|
||||
float tone_numlk_off[][2] = SONG(NUM_LOCK_OFF_SOUND);
|
||||
float tone_scroll_on[][2] = SONG(SCROLL_LOCK_ON_SOUND);
|
||||
float tone_scroll_off[][2] = SONG(SCROLL_LOCK_OFF_SOUND);
|
||||
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
|
||||
|
||||
#endif /* AUDIO_ENABLE */
|
||||
|
||||
void persistant_default_layer_set(uint16_t default_layer)
|
||||
{
|
||||
eeconfig_update_default_layer(default_layer);
|
||||
default_layer_set(default_layer);
|
||||
}
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
|
||||
// MACRODOWN only works in this function
|
||||
switch(id)
|
||||
{
|
||||
|
||||
case MACRO_QWERTY:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
persistant_default_layer_set(1UL<<LAYER_QWERTY);
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_NOTE_ARRAY(tone_qwerty, false, STACCATO);
|
||||
#endif /* AUDIO_ENABLE */
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_COLEMAK:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
persistant_default_layer_set(1UL<<LAYER_COLEMAK);
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_NOTE_ARRAY(tone_colemak, false, STACCATO);
|
||||
#endif /* AUDIO_ENABLE */
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_DVORAK:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
persistant_default_layer_set(1UL<<LAYER_DVORAK);
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_NOTE_ARRAY(tone_dvorak, false, STACCATO);
|
||||
#endif /* AUDIO_ENABLE */
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_LOWER:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
layer_on(LAYER_LOWER);
|
||||
update_tri_layer(LAYER_LOWER, LAYER_RAISE, LAYER_ADJUST);
|
||||
}
|
||||
else
|
||||
{
|
||||
layer_off(LAYER_LOWER);
|
||||
update_tri_layer(LAYER_LOWER, LAYER_RAISE, LAYER_ADJUST);
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_RAISE:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
layer_on(LAYER_RAISE);
|
||||
update_tri_layer(LAYER_LOWER, LAYER_RAISE, LAYER_ADJUST);
|
||||
}
|
||||
else
|
||||
{
|
||||
layer_off(LAYER_RAISE);
|
||||
update_tri_layer(LAYER_LOWER, LAYER_RAISE, LAYER_ADJUST);
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_FUNCTION:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
layer_on(LAYER_FUNCTION);
|
||||
}
|
||||
else
|
||||
{
|
||||
layer_off(LAYER_FUNCTION);
|
||||
}
|
||||
break;
|
||||
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
case MACRO_BACKLIGHT:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
backlight_step();
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef MOUSEKEY_ENABLE
|
||||
|
||||
case MACRO_MOUSE:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
layer_invert(LAYER_MOUSE);
|
||||
}
|
||||
break;
|
||||
|
||||
#endif /* MOUSEKEY_ENABLE */
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
|
||||
case MACRO_TIMBRE_1:
|
||||
if (record->event.pressed) set_timbre(TIMBRE_12);
|
||||
break;
|
||||
|
||||
case MACRO_TIMBRE_2:
|
||||
if (record->event.pressed) set_timbre(TIMBRE_25);
|
||||
break;
|
||||
|
||||
case MACRO_TIMBRE_3:
|
||||
if (record->event.pressed) set_timbre(TIMBRE_50);
|
||||
break;
|
||||
|
||||
case MACRO_TIMBRE_4:
|
||||
if (record->event.pressed) set_timbre(TIMBRE_75);
|
||||
break;
|
||||
|
||||
case MACRO_TEMPO_U:
|
||||
if (record->event.pressed) increase_tempo(10);
|
||||
break;
|
||||
|
||||
case MACRO_TEMPO_D:
|
||||
if (record->event.pressed) decrease_tempo(10);
|
||||
break;
|
||||
|
||||
case MACRO_TONE_DEFAULT:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
set_timbre(TIMBRE_DEFAULT);
|
||||
set_tempo(TEMPO_DEFAULT);
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_AUDIO_OFF:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
#ifdef AUDIO_ENABLE
|
||||
audio_off();
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_AUDIO_ON:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
#ifdef AUDIO_ENABLE
|
||||
audio_on();
|
||||
PLAY_NOTE_ARRAY(tone_audio_on, false, STACCATO);
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_MUSIC_ON:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_NOTE_ARRAY(tone_music_on, false, STACCATO);
|
||||
layer_on(LAYER_MUSIC);
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_MUSIC_OFF:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
#ifdef AUDIO_ENABLE
|
||||
layer_off(LAYER_MUSIC);
|
||||
stop_all_notes();
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_INC_VOICE:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
#ifdef AUDIO_ENABLE
|
||||
voice_iterate();
|
||||
PLAY_NOTE_ARRAY(music_scale, false, STACCATO);
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_DEC_VOICE:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
#ifdef AUDIO_ENABLE
|
||||
voice_deiterate();
|
||||
PLAY_NOTE_ARRAY(music_scale, false, STACCATO);
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
|
||||
#endif /* AUDIO_ENABLE */
|
||||
|
||||
default:
|
||||
break;
|
||||
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
|
||||
|
||||
void process_action_user(keyrecord_t *record)
|
||||
{
|
||||
|
||||
uint8_t starting_note = 0x0C;
|
||||
int offset = 7;
|
||||
|
||||
if (IS_LAYER_ON(LAYER_MUSIC))
|
||||
{
|
||||
if (record->event.pressed)
|
||||
{
|
||||
play_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)), 0xF);
|
||||
}
|
||||
else
|
||||
{
|
||||
stop_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)));
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void matrix_init_user(void)
|
||||
{
|
||||
set_voice(default_voice);
|
||||
play_startup_tone();
|
||||
println("Matrix Init");
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led)
|
||||
{
|
||||
static uint8_t old_usb_led = 0;
|
||||
|
||||
_delay_ms(10); // gets rid of tick
|
||||
|
||||
if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK)))
|
||||
{
|
||||
// If CAPS LK LED is turning on...
|
||||
PLAY_NOTE_ARRAY(tone_caps_on, false, LEGATO);
|
||||
}
|
||||
else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK)))
|
||||
{
|
||||
// If CAPS LK LED is turning off...
|
||||
PLAY_NOTE_ARRAY(tone_caps_off, false, LEGATO);
|
||||
}
|
||||
else if ((usb_led & (1<<USB_LED_NUM_LOCK)) && !(old_usb_led & (1<<USB_LED_NUM_LOCK)))
|
||||
{
|
||||
// If NUM LK LED is turning on...
|
||||
PLAY_NOTE_ARRAY(tone_numlk_on, false, LEGATO);
|
||||
}
|
||||
else if (!(usb_led & (1<<USB_LED_NUM_LOCK)) && (old_usb_led & (1<<USB_LED_NUM_LOCK)))
|
||||
{
|
||||
// If NUM LED is turning off...
|
||||
PLAY_NOTE_ARRAY(tone_numlk_off, false, LEGATO);
|
||||
}
|
||||
else if ((usb_led & (1<<USB_LED_SCROLL_LOCK)) && !(old_usb_led & (1<<USB_LED_SCROLL_LOCK)))
|
||||
{
|
||||
// If SCROLL LK LED is turning on...
|
||||
PLAY_NOTE_ARRAY(tone_scroll_on, false, LEGATO);
|
||||
}
|
||||
else if (!(usb_led & (1<<USB_LED_SCROLL_LOCK)) && (old_usb_led & (1<<USB_LED_SCROLL_LOCK)))
|
||||
{
|
||||
// If SCROLL LED is turning off...
|
||||
PLAY_NOTE_ARRAY(tone_scroll_off, false, LEGATO);
|
||||
}
|
||||
old_usb_led = usb_led;
|
||||
}
|
||||
|
||||
|
||||
void play_startup_tone()
|
||||
{
|
||||
_delay_ms(10); // gets rid of tick
|
||||
PLAY_NOTE_ARRAY(tone_my_startup, false, STACCATO);
|
||||
}
|
||||
|
||||
void play_goodbye_tone()
|
||||
{
|
||||
PLAY_NOTE_ARRAY(tone_my_goodbye, false, STACCATO);
|
||||
_delay_ms(1000);
|
||||
}
|
||||
|
||||
#endif /* AUDIO_ENABLE */
|
@ -0,0 +1,17 @@
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = yes # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
CONFIG_H = keymaps/$(KEYMAP)/config.h
|
@ -1,179 +0,0 @@
|
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
// this is the style you want to emulate.
|
||||
|
||||
#include "planck.h"
|
||||
#include "print.h"
|
||||
#include "action_layer.h"
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
#include "backlight.h"
|
||||
#endif
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _QW 0
|
||||
#define _CM 1
|
||||
#define _DV 2
|
||||
#define _LW 3
|
||||
#define _RS 4
|
||||
#define _FN 5
|
||||
|
||||
#define XXXXXXX KC_NO
|
||||
#define _______ KC_TRNS
|
||||
|
||||
#define ASFT(kc) LSFT(RSFT(kc))
|
||||
#define MG_B ASFT(KC_B)
|
||||
#define MG_H ASFT(KC_H)
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* Qwerty
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Esc | A | S | D | F | G | H | J | K | L | ; | " |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | Shift| Z | X | C | V | B | N | M | , | . | Up |Enter |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Ctrl | GUI | Alt | Del |Raise | Space |Lower | / | Left | Down |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_QW] = {
|
||||
{RESET, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
|
||||
{KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
|
||||
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_ENT },
|
||||
{KC_LCTL, KC_LGUI, KC_LALT, KC_DEL, M(_LW), KC_SPC, KC_SPC, M(_RS), KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT}
|
||||
},
|
||||
|
||||
/* Colemak
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Esc | A | R | S | T | D | H | N | E | I | O | " |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_CM] = {
|
||||
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
|
||||
{KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
|
||||
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
|
||||
{M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
|
||||
},
|
||||
|
||||
/* Dvorak
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Esc | A | O | E | U | I | D | H | T | N | S | / |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_DV] = {
|
||||
{KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC},
|
||||
{KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH},
|
||||
{KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT },
|
||||
{M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
|
||||
},
|
||||
|
||||
/* Raise
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Esc | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | Shift| F7 | F8 | F9 | F10 | F11 | F12 |Qwerty|Colemk|Dvorak| Reset|Enter |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RS] = {
|
||||
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
|
||||
{_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
|
||||
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, XXXXXXX, RESET, _______},
|
||||
{_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
|
||||
},
|
||||
|
||||
/* Lower
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Esc | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | Shift| F7 | F8 | F9 | F10 | F11 | F12 |Qwerty|Colemk|Dvorak| Reset|Enter |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_LW] = {
|
||||
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
|
||||
{_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
|
||||
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, XXXXXXX, MG_B, _______},
|
||||
{_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
|
||||
},
|
||||
|
||||
/* Function
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Esc | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | Shift| F7 | F8 | F9 | F10 | F11 | F12 |Qwerty|Colemk|Dvorak| Reset|Enter |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FN] = {
|
||||
{XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
|
||||
{XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
|
||||
{XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX},
|
||||
{XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}
|
||||
}
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id)
|
||||
{
|
||||
case _RS:
|
||||
if (record->event.pressed) {
|
||||
print("RS_DN");
|
||||
layer_on(_RS);
|
||||
update_tri_layer(_RS, _LW, _FN);
|
||||
} else {
|
||||
print("RS_UP");
|
||||
layer_off(_RS);
|
||||
update_tri_layer(_RS, _LW, _FN);
|
||||
phex(layer_state);
|
||||
}
|
||||
break;
|
||||
|
||||
case _LW:
|
||||
if (record->event.pressed) {
|
||||
print("LW_DN");
|
||||
layer_on(_LW);
|
||||
update_tri_layer(_RS, _LW, _FN);
|
||||
} else {
|
||||
print("LW_UP");
|
||||
layer_off(_LW);
|
||||
update_tri_layer(_RS, _LW, _FN);
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
@ -1,61 +0,0 @@
|
||||
|
||||
#include <avr/io.h>
|
||||
#include "backlight.h"
|
||||
|
||||
#define CHANNEL OCR1C
|
||||
|
||||
void backlight_init_ports()
|
||||
{
|
||||
|
||||
// Setup PB7 as output and output low.
|
||||
DDRB |= (1<<7);
|
||||
PORTB &= ~(1<<7);
|
||||
|
||||
// Use full 16-bit resolution.
|
||||
ICR1 = 0xFFFF;
|
||||
|
||||
// I could write a wall of text here to explain... but TL;DW
|
||||
// Go read the ATmega32u4 datasheet.
|
||||
// And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
|
||||
|
||||
// Pin PB7 = OCR1C (Timer 1, Channel C)
|
||||
// Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
|
||||
// (i.e. start high, go low when counter matches.)
|
||||
// WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
|
||||
// Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
|
||||
|
||||
TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
|
||||
TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
|
||||
|
||||
backlight_init();
|
||||
}
|
||||
|
||||
void backlight_set(uint8_t level)
|
||||
{
|
||||
if ( level == 0 )
|
||||
{
|
||||
// Turn off PWM control on PB7, revert to output low.
|
||||
TCCR1A &= ~(_BV(COM1C1));
|
||||
CHANNEL = 0x0;
|
||||
// Prevent backlight blink on lowest level
|
||||
PORTB &= ~(_BV(PORTB7));
|
||||
}
|
||||
else if ( level == BACKLIGHT_LEVELS )
|
||||
{
|
||||
// Prevent backlight blink on lowest level
|
||||
PORTB &= ~(_BV(PORTB7));
|
||||
// Turn on PWM control of PB7
|
||||
TCCR1A |= _BV(COM1C1);
|
||||
// Set the brightness
|
||||
CHANNEL = 0xFFFF;
|
||||
}
|
||||
else
|
||||
{
|
||||
// Prevent backlight blink on lowest level
|
||||
PORTB &= ~(_BV(PORTB7));
|
||||
// Turn on PWM control of PB7
|
||||
TCCR1A |= _BV(COM1C1);
|
||||
// Set the brightness
|
||||
CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
|
||||
}
|
||||
}
|