Merge pull request #13 from rswiernik/master

Updated Readme and Build info

keyboard/planck/Makefile

@@ -47,20 +47,25 @@ TOP_DIR = ../..
 # Directory keyboard dependent files exist
 TARGET_DIR = .
 
+
+
 # # project specific files
-# SRC =	keymap_common.c \
-# 	matrix_handwire.c \
-# 	led.c \
-# 	backlight.c
-
-# ifdef KEYMAP
-#     SRC := keymap_$(KEYMAP).c $(SRC)
-# else
-#     SRC := keymap_jack.c $(SRC)
-# endif
-
-# project specific files
-SRC =	extended_keymap_common.c \
+ifdef COMMON_KEYMAP
+
+	SRC = keymap_common.c \
+	matrix_handwire.c \
+	led.c \
+	backlight.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_jack.c $(SRC)
+endif
+
+else
+
+SRC = extended_keymap_common.c \
 	matrix_handwire.c \
 	led.c \
 	backlight.c
@@ -71,6 +76,8 @@ else
     SRC := extended_keymap_jack.c $(SRC)
 endif
 
+endif
+
 CONFIG_H = config.h
 
 # MCU name

keyboard/planck/README.md

@@ -18,23 +18,39 @@ If you include extended_keymap_common.h instead of keymap_common.h at the top of
 
 ## Build
 
-Follow [this guide](http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177.html) to setup your development environment before anything else.
+Follow [this guide](http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177.html) to setup your development environment before anything else. Abbreviated instructions are provide at the [bottom of this document](https://github.com/rswiernik/tmk_keyboard/tree/rswiernik_dev/keyboard/planck#environment-setup)
 
-Download the whole firmware [here](https://github.com/jackhumbert/tmk_keyboard/archive/master.zip) and navigate to the keyboard/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex that you can load with the Teensy app onto your Planck (once you've hit reset/shorted GND & RST).
+Download the whole firmware [here](https://github.com/jackhumbert/tmk_keyboard/archive/master.zip) and navigate to the keyboard/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex that you can load with the Teensy app onto your Planck (once you've hit reset/shorted GND & RST). 
 
-Move to this directory then just run `make` like:
+Depending on which keymap you would like to use, you will have to compile slightly differently.
 
-    $ make
+####Default
+To build with the default keymap, simply move to the tmk\_keyboard/keyboard/planck/ and run `make` as follows:
+```
+$ make
+```
 
 ## Keymap
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
+    
+####**Extended Keymaps**
 
-To build firmware binary hex file with a certain keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with an extended keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[common|jack|<name>]
+```
+_The only applicable keymaps will work with this option._ Extended keymaps follow the format **__extended\_keymap\_\<name\>.c__**
 
-    $ make KEYMAP=[<name>]
+####**Common Keymaps**
+
+Building with a common keymap is as simple as adding the COMMON option. Note that only 
+```
+$ make KEYMAP=[common|jack|<name>] COMMON=true
+```
+_The only applicable keymaps will work with this option._ Common keymaps follow the format **__keymap\_\<name\>.c__**
 
 ## Notable TMK forks (which some of the keymap files are from)
 - [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck)
 - [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c)
 - [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck)
-- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid)
+- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid)

keyboard/planck/keymap_reed.c

@@ -0,0 +1,74 @@
+#include "keymap_common.h"
+
+/*
+ * BUILD:
+ * Simply run the command below in the keyboard/planck directory
+ * to build against this keymap
+ *
+ *    make KEYMAP=reed COMMON_KEYMAP=true
+ *
+ *
+ * DETAILS:
+ *
+ * This layout works off of Jack's layout, making some changes that I
+ * feel significantly improve the function of the keyboard. Major changes
+ * include adding a "gaming mode" that will allow users to still access
+ * the number keys 1 through 4 easily for games that require it. Also
+ * included is the ability to use the tap/hold function for easy use of
+ * right shift and thumb shift with their tapped companions.
+ *
+ */
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP_GRID( /* Reed */
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  TAB,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, FN5,
+  LCTL, CAPS, LALT, LGUI, FN2, FN7,  SPC,  FN1,   LEFT, DOWN, UP,  RGHT),
+
+[1] = KEYMAP_GRID( /* Reed EXTREME GAMING */
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  TAB,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, FN5,
+  LCTL, 1,    2,    3,    4,   SPC,  FN2,  FN1,   LEFT, DOWN, UP,  RGHT),
+
+[2] = KEYMAP_GRID( /* Reed RAISE */
+  GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    BSPC,
+  TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, MINS, EQL,  LBRC, RBRC, BSLS,
+  TRNS, F1,   F2,    F3,   F4,    F5,    F6,   F7,   F8,   F9,   F10,  TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, MNXT, VOLD, VOLU, MPLY),
+
+[3] = KEYMAP_GRID( /* Reed LOWER */
+  TRNS	, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, DEL,
+  TRNS, TRNS, TRNS, PAUSE, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28,
+  TRNS, F11,  F12,  F13,  F14,  F15,  F16,  F17,  F18,  F19,  F20, TRNS,
+  TRNS, TRNS, TRNS, TRNS, FN2,  TRNS, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay - RAISE
+    [2] = ACTION_LAYER_MOMENTARY(3),  // to Fn overlay - LOWER
+
+    [3] = ACTION_DEFAULT_LAYER_SET(0),
+    [4] = ACTION_DEFAULT_LAYER_SET(1),
+	// Actions for the tap/hold modifiers listed above
+    [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
+    [7] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPC),
+	
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+
+    [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
+};