diff --git a/keyboard/gh60/Makefile.lufa b/keyboard/gh60/Makefile.lufa new file mode 100644 index 00000000..45402bb3 --- /dev/null +++ b/keyboard/gh60/Makefile.lufa @@ -0,0 +1,123 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = gh60_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + + +# List C source files here. (C dependencies are automatically generated.) +SRC += keymap.c \ + matrix.c \ + led.c + +CONFIG_H = config.h + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +# Build Options +# comment out to disable the options. +# +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support + + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOT_SIZE=4096 + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk + +plain: OPT_DEFS += -DPLAIN_MAP +plain: all diff --git a/keyboard/gh60/Makefile.pjrc b/keyboard/gh60/Makefile.pjrc new file mode 100644 index 00000000..6b3a8d1a --- /dev/null +++ b/keyboard/gh60/Makefile.pjrc @@ -0,0 +1,93 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = gh60_pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = keymap.c \ + matrix.c \ + led.c + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Build Options +# comment out to disable the options. +# +MOUSEKEY_ENABLE = yes # Mouse keys +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +EXTRAKEY_ENABLE = yes # Audio control and System control +NKRO_ENABLE = yes # USB Nkey Rollover +CONSOLE_ENABLE = yes # Console for debug + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk + +plain: OPT_DEFS += -DPLAIN_MAP +plain: all diff --git a/keyboard/gh60/README.md b/keyboard/gh60/README.md new file mode 100644 index 00000000..73eb4b6d --- /dev/null +++ b/keyboard/gh60/README.md @@ -0,0 +1,89 @@ +GH60 keyboard firmware +====================== +DIY compact keyboard designed and run by komar007 and Geekhack community. + +## Threads on Geekhack.org +- [Prototyping](http://geekhack.org/index.php?topic=34959.0) +- [Beta-test](http://geekhack.org/index.php?topic=37570.0) + + +## Build +Move to this directory then just run `make` like: + + $ make -f Makfile.pjrc + + +## Keymap +See keymap.c to define your own favourite keymap. + +###Keymap with funky layers. + Layer 0: Default Layer + ,-----------------------------------------------------------. + |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + |-----------------------------------------------------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + |-----------------------------------------------------------| + |Caps | A| S| D| F| G| H| J| K| L|Fn3| '|Return | + |-----------------------------------------------------------| + |Shift | Z| X| C| V| B| N| M| ,| .|Fn2|Shift | + |-----------------------------------------------------------| + |Ctrl|Gui |Alt | Space |Alt |Gui |App |Fn1 | + `-----------------------------------------------------------' + + Layer 1: HHKB mode + ,-----------------------------------------------------------. + |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | + |-----------------------------------------------------------| + |Caps | | | | | | | |Psc|Slk|Pus|Up | |Inser| + |-----------------------------------------------------------| + |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | + |-----------------------------------------------------------| + |Shift | | | | | | +| -|End|PgD|Dow|Shift | + |-----------------------------------------------------------| + |Ctrl|Gui |Alt | Space |Alt |Gui |App |xxx | + `-----------------------------------------------------------' + + Layer 2: Vi mode + ,-----------------------------------------------------------. + | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backsp | + |-----------------------------------------------------------| + |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgU|End| | | | | + |-----------------------------------------------------------| + |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return | + |-----------------------------------------------------------| + |Shift | | | | | |Hom|PgD|PgU|End|xxx|Shift | + |-----------------------------------------------------------| + |Ctrl|Gui |Alt | Space |Alt |Gui |App |Ctrl| + `-----------------------------------------------------------' + + Layer 3: Mouse mode + ,-----------------------------------------------------------. + | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backsp | + |-----------------------------------------------------------| + |Tab |MwL|MwD|McU|MwU|MwR|MwL|MwD|MwU|MwR| | | | | + |-----------------------------------------------------------| + |Contro| |McL|McD|McR| |McL|McD|McU|McR|xxx| |Return | + |-----------------------------------------------------------| + |Shift | | |Mb1|Mb2|Mb3|Mb2|Mb1| | | |Shift | + |-----------------------------------------------------------| + |Ctrl|Gui |Alt | Space |Alt |Gui |xxx |Ctrl| + `-----------------------------------------------------------' + Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel + +### Plain keymap without Fn layer. +This will be useful if you want to use key mapping tool like AHK. +To get this plain keymap run: + + $ make -f Makefile.pjrc plain + + ,-----------------------------------------------------------. + |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + |-----------------------------------------------------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + |-----------------------------------------------------------| + |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | + |-----------------------------------------------------------| + |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + |-----------------------------------------------------------| + |Ctrl|Gui |Alt | Space |Alt |Gui |App |Ctrl| + `-----------------------------------------------------------' diff --git a/keyboard/gh60/config.h b/keyboard/gh60/config.h new file mode 100644 index 00000000..6e7b1bd7 --- /dev/null +++ b/keyboard/gh60/config.h @@ -0,0 +1,50 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT GH60 + + +/* message strings */ +#define DESCRIPTION t.m.k. keyboard firmware for GH60 + + +/* matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if need no debouncing */ +#define DEBOUNCE 5 + + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#endif diff --git a/keyboard/gh60/keymap.c b/keyboard/gh60/keymap.c new file mode 100644 index 00000000..2608c98c --- /dev/null +++ b/keyboard/gh60/keymap.c @@ -0,0 +1,202 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include +#include +#include +#include "keycode.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "keymap.h" + + +/* GH60 keymap definition macro + * K2C, K31 and K3C are extra keys for ISO + */ +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ +} + +/* ANSI valiant. No extra keys for ISO */ +#define KEYMAP_ANSI( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ +) KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \ + K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ +) + +#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)])) + + +// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. +static const uint8_t PROGMEM fn_layer[] = { + 0, // Fn0 + 1, // Fn1 + 2, // Fn2 + 3, // Fn3 + 3, // Fn4 + 0, // Fn5 + 0, // Fn6 + 0 // Fn7 +}; + +// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. +// See layer.c for details. +static const uint8_t PROGMEM fn_keycode[] = { + KC_NO, // Fn0 + KC_NO, // Fn1 + KC_SLSH, // Fn2 + KC_SCLN, // Fn3 + KC_NO, // Fn4 + KC_NO, // Fn5 + KC_NO, // Fn6 + KC_NO // Fn7 +}; + +static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +#ifdef PLAIN_MAP + /* Layer 0: Default Layer + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |-----------------------------------------------------------| + * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |App |Ctrl| + * `-----------------------------------------------------------' + */ + KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ + CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NO, ENT, \ + LSFT,NO, Z, X, C, V, B, N, M, COMM,DOT, SLSH,NO, RSFT, \ + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL), +#else + /* Layer 0: Default Layer + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |-----------------------------------------------------------| + * |Caps | A| S| D| F| G| H| J| K| L|Fn3| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .|Fn2|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Fn4 |Fn4 |Fn1 | + * `-----------------------------------------------------------' + */ + KEYMAP_ANSI( + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ + LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT, ENT, \ + LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT, \ + LCTL,LGUI,LALT, SPC, RALT,FN4, FN4, FN1), + /* Layer 1: HHKB mode + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | + * |-----------------------------------------------------------| + * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Inser| + * |-----------------------------------------------------------| + * |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | + * |-----------------------------------------------------------| + * |Shift | | | | | | +| -|End|PgD|Dow|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |App |xxx | + * `-----------------------------------------------------------' + */ + KEYMAP_ANSI( + PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ + CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, INS, \ + LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT, ENT, \ + LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN, RSFT, \ + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, FN1), + /* Layer 2: Vi mode (Slash) + * ,-----------------------------------------------------------. + * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backsp | + * |-----------------------------------------------------------| + * |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgU|End| | | | | + * |-----------------------------------------------------------| + * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return | + * |-----------------------------------------------------------| + * |Shift | | | | | |Hom|PgD|PgU|End|xxx|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |App |Ctrl| + * `-----------------------------------------------------------' + */ + KEYMAP_ANSI( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, BSPC, \ + TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, NO, \ + LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \ + LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT, \ + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL), + /* Layer 3: Mouse mode (Semicolon/App) + * ,-----------------------------------------------------------. + * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backsp | + * |-----------------------------------------------------------| + * |Tab | | | | | |MwL|MwD|MwU|MwR| | | | | + * |-----------------------------------------------------------| + * |Contro| |Ac0|Ac1|Ac1| |McL|McD|McU|McR|xxx| |Return | + * |-----------------------------------------------------------| + * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space | |xxx |xxx | | + * `-----------------------------------------------------------' + * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel + */ + KEYMAP_ANSI( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, BSPC, \ + TAB, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO, \ + LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, ENT, \ + LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT, \ + LCTL,LGUI,LALT, BTN1, NO, FN4, FN4, NO ), +#endif +}; + + +uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) +{ + return KEYCODE(layer, row, col); +} + +uint8_t keymap_fn_layer(uint8_t index) +{ + return pgm_read_byte(&fn_layer[index]); +} + +uint8_t keymap_fn_keycode(uint8_t index) +{ + return pgm_read_byte(&fn_keycode[index]); +} diff --git a/keyboard/gh60/led.c b/keyboard/gh60/led.c new file mode 100644 index 00000000..62abcd79 --- /dev/null +++ b/keyboard/gh60/led.c @@ -0,0 +1,34 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + if (usb_led & (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static uint16_t *matrix; +static uint16_t *matrix_debouncing; +static uint16_t matrix0[MATRIX_ROWS]; +static uint16_t matrix1[MATRIX_ROWS]; +static bool is_modified; + +static uint16_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // initialize row and col + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + matrix = matrix0; + matrix_debouncing = matrix1; + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + is_modified = false; +} + +uint8_t matrix_scan(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + //unselect_rows(); + select_row(i); + _delay_us(30); // without this wait read unstable value. + uint16_t cols = read_cols(); + if (matrix_debouncing[i] != cols) { + matrix_debouncing[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + is_modified = false; + } + unselect_rows(); + } + //unselect_rows(); + + if (debouncing) { + debouncing--; + _delay_ms(1); + } else { + uint16_t *tmp = matrix; + matrix = matrix_debouncing; + matrix_debouncing = tmp; + is_modified = true; + } + + return 1; +} + +bool matrix_is_modified(void) +{ + return is_modified; +} + +inline +bool matrix_has_ghost(void) +{ + return false; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1<