diff --git a/keyboards/infinity60/led.c b/keyboards/infinity60/led.c index d2f55454..c78e2d11 100644 --- a/keyboards/infinity60/led.c +++ b/keyboards/infinity60/led.c @@ -16,6 +16,7 @@ along with this program. If not, see . */ #include "hal.h" +#include "print.h" #include "led.h" @@ -26,6 +27,7 @@ along with this program. If not, see . * In particular, I2C functions (interrupt-driven) should NOT be called from here. */ void led_set(uint8_t usb_led) { + msg_t msg; /* // PTA5: LED (1:on/0:off) GPIOA->PDDR |= (1<<1); @@ -36,18 +38,32 @@ void led_set(uint8_t usb_led) { GPIOA->PCOR |= (1<<5); } */ -//TODO: How does this test if led is set -//usb_led --> led_set(usb_led) <-- chibios/host_keyboard_leds <-- keyboard_leds from usbSetupTransfer -//keyboard_leds is enum'd in chibios/main.c + if (usb_led & (1<. #include "ch.h" #include "hal.h" #include "print.h" +#include "led.h" #include "led_controller.h" @@ -57,11 +58,11 @@ along with this program. If not, see . * The usual Caps Lock position is C4-6, so the address is * 0x24 + (4-1)*0x10 + (8-1) = 0x59 */ #if !defined(CAPS_LOCK_LED_ADDRESS) -#define CAPS_LOCK_LED_ADDRESS 0x46 +#define CAPS_LOCK_LED_ADDRESS 46 #endif #if !defined(NUM_LOCK_LED_ADDRESS) -#define NUM_LOCK_LED_ADDRESS 0x85 +#define NUM_LOCK_LED_ADDRESS 85 #endif /* Which LED should breathe during sleep */ @@ -215,7 +216,6 @@ layer_status = 0; is31_write_data (7, led_control_reg, 0x12+1); is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7); layer_status = 7; - is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp); break; case TOGGLE_ALL: @@ -259,12 +259,18 @@ layer_status = 0; } break; - case TOGGLE_LOCK_LED: - //msg_led = 0-3 for lock flags - lock_status ^= msg_led; //TODO: confirm toggling works and doesn't get out of sync - set_lock_leds(led_control_reg, lock_status); + case TOGGLE_NUM_LOCK: + //msg_led = 0 or 1, off/on + //TODO: confirm toggling works and doesn't get out of sync + set_lock_leds(USB_LED_NUM_LOCK, msg_led); break; + case TOGGLE_CAPS_LOCK: + //msg_led = 0 or 1, off/on + //TODO: confirm toggling works and doesn't get out of sync + set_lock_leds(USB_LED_CAPS_LOCK, msg_led); + break; + case MODE_BREATH: break; case STEP_BRIGHTNESS: @@ -335,11 +341,10 @@ layer_status = 0; * ======================== */ void set_led_bit (uint8_t *led_control_reg, uint8_t msg_led, uint8_t toggle_on) { uint8_t row_byte, column_bit; - //msg_led tens column is pin#, A-control register is every other 8 bits + //msg_led tens column is pin# //ones column is bit position in 8-bit mask - //control register will be one bit shifted into position along register's full 0x12 bytes - ////first byte is register address 0x00 - row_byte = ((msg_led / 10) % 10 - 1 ) * 2 + 1; + //first byte is register address 0x00 + row_byte = ((msg_led / 10) % 10 - 1 ) * 2 + 1;// A register is every other 8 bits column_bit = 1<<(msg_led % 10 - 1); if (toggle_on) { @@ -349,31 +354,61 @@ void set_led_bit (uint8_t *led_control_reg, uint8_t msg_led, uint8_t toggle_on) } } -void set_lock_leds(uint8_t *led_control_reg, uint8_t lock_status) { - uint8_t i; - - switch (lock_status) { - case 1: - set_led_bit(led_control_reg, CAPS_LOCK_LED_ADDRESS, 1); - set_led_bit(led_control_reg, NUM_LOCK_LED_ADDRESS, 0); - break; - case 2: - set_led_bit(led_control_reg, CAPS_LOCK_LED_ADDRESS, 0); - set_led_bit(led_control_reg, NUM_LOCK_LED_ADDRESS, 1); - break; - case 3: - set_led_bit(led_control_reg, NUM_LOCK_LED_ADDRESS, 1); - set_led_bit(led_control_reg, CAPS_LOCK_LED_ADDRESS, 1); - break; - } - - for(i=BACKLIGHT_OFF_LOCK_LED_OFF; i<8; i++) { //set in led_controller.h - is31_write_data (i, led_control_reg, 0x12+1); +//TODO: not toggling off correctly +//TODO: confirm led_off page still has FF pwm for all +void set_lock_leds(uint8_t lock_type, uint8_t lock_status) { + uint8_t page; + uint8_t led_addr, temp; + uint8_t control_reg[2] = {0};//register address and led bits + + switch(lock_type) { + case USB_LED_NUM_LOCK: + led_addr = NUM_LOCK_LED_ADDRESS; + break; + case USB_LED_CAPS_LOCK: + led_addr = CAPS_LOCK_LED_ADDRESS; + break; + #ifdef SCROLL_LOCK_LED_ADDRESS + case USB_LED_SCROLL_LOCK: + led_addr = SCROLL_LOCK_LED_ADDRESS; + break; + #endif + #ifdef COMPOSE_LED_ADDRESS + case USB_LED_COMPOSE: + led_addr = COMPOSE_LED_ADDRESS; + break; + #endif + #ifdef SCROLL_LOCK_LED_ADDRESS + case USB_LED_KANA: + led_addr = KANA_LED_ADDRESS; + break; + #endif + } + xprintf("led_addr: %X\n", led_addr); + chThdSleepMilliseconds(30); + control_reg[0] = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-register is every other byte + xprintf("control_reg: %X\n", control_reg[0]); + chThdSleepMilliseconds(30); + + for(page=BACKLIGHT_OFF_LOCK_LED_OFF; page<8; page++) { //set in led_controller.h + is31_read_register(page,control_reg[0],&temp);//need to maintain status of leds in this row (1 byte) + chThdSleepMilliseconds(30); + xprintf("1lock byte: %X\n", temp); + chThdSleepMilliseconds(30); + if (lock_status) { + temp |= 1<<(led_addr % 10 - 1); + } else { + temp &= ~1<<(led_addr % 10 - 1); + } + chThdSleepMilliseconds(30); + xprintf("2lock byte: %X\n", temp); + chThdSleepMilliseconds(30); + control_reg[1] = temp; + is31_write_data (page, control_reg, 0x02); } } void write_led_page (uint8_t page, const uint8_t *led_array, uint8_t led_count) { -//TODO: init function that accepts array of led addresses and sets them by row uint8_t i; uint8_t row, col; uint8_t temp_control_reg[0x13] = {0};//led control register start address + 0x12 bytes @@ -433,9 +468,8 @@ void led_controller_init(void) { is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3); // clean up the lock LEDs - //TODO: adjust for new addressing and additional frames - //is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0); - //is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0); + set_lock_leds(USB_LED_NUM_LOCK, 0); + set_lock_leds(USB_LED_CAPS_LOCK, 0); /* more time consuming LED processing should be offloaded into * a thread, with asynchronous messaging. */ diff --git a/keyboards/infinity60/led_controller.h b/keyboards/infinity60/led_controller.h index e9d89730..74086201 100644 --- a/keyboards/infinity60/led_controller.h +++ b/keyboards/infinity60/led_controller.h @@ -32,9 +32,9 @@ msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result); void led_controller_init(void); -#define CAPS_LOCK_LED_ADDRESS 0x46 -#define NUM_LOCK_LED_ADDRESS 0x85 -#define BACKLIGHT_OFF_LOCK_LED_OFF 1 //set to 0 to show lock leds even if backlight off +#define CAPS_LOCK_LED_ADDRESS 46 +#define NUM_LOCK_LED_ADDRESS 85 +#define BACKLIGHT_OFF_LOCK_LED_OFF 0 //set to 0 to show lock leds even if backlight off /* ============================= * IS31 chip related definitions @@ -93,7 +93,7 @@ void led_controller_init(void); extern mailbox_t led_mailbox; void set_led_bit (uint8_t *led_control_reg, uint8_t led_msg, uint8_t toggle_on); -void set_lock_leds (uint8_t *led_control_reg, uint8_t lock_status); +void set_lock_leds (uint8_t lock_type, uint8_t lock_status); void write_led_page (uint8_t page, const uint8_t *led_array, uint8_t led_count); // constants for signaling the LED controller thread @@ -103,7 +103,8 @@ enum led_msg_t { TOGGLE_ALL, TOGGLE_BACKLIGHT, TOGGLE_LAYER_LEDS, - TOGGLE_LOCK_LED, + TOGGLE_NUM_LOCK, + TOGGLE_CAPS_LOCK, MODE_BREATH, STEP_BRIGHTNESS };