You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/handwired/frenchdev/readme.md

103 lines
3.6 KiB
Markdown

# Frenchdev : My take on a splitted keyboard for dev and french language
Concept based on
- [ergodox](https://ergodox-ez.com/)
- [katy](https://deskthority.net/workshop-f7/katy-keyboard-or-k80cs-key80-contoured-split-t8524.html)
8 years ago
with the added possibility to connect up to 6 external switches like pedals,
and somewhat like the katy, not all keys are on the same level for easier reach.
###Photos
- [default layout](http://i.imgur.com/r2Nvr4p.png)
- [editable layout on keyboard layout editor](http://www.keyboard-layout-editor.com/#/gists/4480e3ab8026eb7c710a7e22203ef4aa) (keys placement is NOT precise on this)
- [the thing when finished](http://imgur.com/a/6FY8v)
- [concept and cardboard mockup](http://imgur.com/a/R0vvs)
##Build instructions
8 years ago
docker run --rm -e keymap=default -e keyboard=frenchdev --rm -v D:/Repositories/qmk:/qmk:rw edasque/qmk_firmware
8 years ago
##Laser-cuttable file
There is intentionnaly no hole for the TRRS connector, you are supposed to use a drill for it.
This way if you don't want to use the pedals you don't have a useless hole. Plus it's cleaner.
http://qmk.fm/frenchdev/frenchdev_v1_lasercut_template.svg
##Side stickers
You can find my original file here : http://qmk.fm/frenchdev/example_printable_stickers.svg
I used it when training but now I use blanks and the layout is different.
I still uploaded it because I think it can be a good jumpstart for any temporary stickers on the
side of keycaps.
##List of parts
- I2C mcp23018
- [teensy 2](https://www.pjrc.com/store/teensy.html)
- 3 LED, 5mm tall with flat head
- 3 330 ohm resistor
- 2 470 ohm resistor
- 2 TRRS connectors
- 1 [micro usb breakout board](http://www.ebay.com/itm/-/201387922085?)
- 88 cherry/gateron switchs
- 94 4148 diodes
- 34 R4 keys
- 14 R3 keys
- 20 R2 keys
- 22 R1 keys
if you fancy adding pedals :
[these are good enough and cheap](https://www.amazon.fr/gp/product/B00V7WITKI/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1). You also need a RCA connector for each of those to replace the included cable
If you (or your coworkers) find them too loud you can replace the switch inside them.
For once we don't really care about what's inside :)
##Various indications
8 years ago
The PHYSICAL rows and columns are connected as such :
on right hand (slave) :
I2C mcp23018
.------- --------.
GND -| 1 VSS \_/ NC 28 |
| 2 NC A7 27 |- C15
R5 -| 3 B0 A6 26 |- C14
R4 -| 4 B1 A5 25 |- C13
R3 -| 5 B2 A4 24 |- C12
R2 -| 6 B3 A3 23 |- C11
R1 -| 7 B4 A2 22 |- C10
R0 -| 8 B5 A1 21 |- C9
| 9 B6 A0 20 |- C8
| 10 B7 INTA 19 |
VCC -| 11 VDD INTB 18 |
SCL -| 12 SCL NC 17 |
SDA -| 13 SDA RST 16 |- VCC
| 14 NC ADDR 15 |- GND
`------------------'
and on left hand (main) :
TEENSY
.------------------.
| GND VCC |
C7 -| B0 F0 |- R5
C6 -| B1 F1 |- R4
C5 -| B2 F4 |- R3
C4 -| B3 F5 |- R2
LEDC -| B7 F6 |- R1
SCL -| D0 F7 |- R0
SDA -| D1 B6 |- LEDB
C3 -| D2 B5 |- LEDA
C2 -| D3 B4 |
C1 -| C6 D7 |
C0 -| C7 D6 |- GND
| D5 D4 |
| VCC RST |
| E6 GND |
`------------------'
We use pull up resistor for SCL and VDA, see https://github.com/ErgoDox-EZ/docs/blob/master/ErgoDox%20EZ%20Schematic.pdf for example
8 years ago
the connector is a standard TRRS (jack with audio + mic)
Diode direction is row to column