|
|
|
|
# Build
|
|
|
|
|
## 'make clean' needs after changing config.h
|
|
|
|
|
To build with new **config.h** you need
|
|
|
|
|
|
|
|
|
|
$ make clean
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
# Degug Console
|
|
|
|
|
## hid_listen can't find device
|
|
|
|
|
When debug console of your device is not ready you will see like this:
|
|
|
|
|
|
|
|
|
|
Waiting for device:.........
|
|
|
|
|
|
|
|
|
|
once the device is pluged in then *hid_listen* finds it you will get this message:
|
|
|
|
|
|
|
|
|
|
Waiting for new device:.........................
|
|
|
|
|
Listening:
|
|
|
|
|
|
|
|
|
|
Check if you can't get this 'Listening:' message:
|
|
|
|
|
- build with `CONSOLE_ENABLE=yes` in **Makefile**.
|
|
|
|
|
|
|
|
|
|
## Can't get message from console
|
|
|
|
|
Check:
|
|
|
|
|
- connect the device to *hid_listen*. See above.
|
|
|
|
|
- push **LShift+RShift+d** to enable debug. See [Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands).
|
|
|
|
|
- set `debug_enable=yes` usually in `matrix_init()` in **matrix.c**.
|
|
|
|
|
- try using 'print' function instead of debug print. See **common/print.h**.
|
|
|
|
|
- disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).
|
|
|
|
|
|
|
|
|
|
***
|
|
|
|
|
|
|
|
|
|
# NKRO
|
|
|
|
|
|
|
|
|
|
# PS/2 mouse support
|
|
|
|
|
## TrackPoint needs reset circuit
|
|
|
|
|
Without reset circuit you will have inconsistent reuslt due to improper initialize of the hardware.
|
|
|
|
|
|
|
|
|
|
http://geekhack.org/index.php?topic=50176.msg1127447#msg1127447
|
