You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/handwired/dactyl/rules.mk

87 lines
3.1 KiB
Makefile

Handwired/Dactyl keyboard (#2058) * Copy the ergodox_ez code to handwired/dactyl Differences from the Ergodox: * Use QMK_SUBPROJECT_H instead of QMK_KEYBOARD_H, since it's under handwired * Omitted several keymaps. They'll eventually be broken (since the Dactyl has fewer keys), and I don't want to try to fix them. * Omitted the keymap images for the default layout, since they depict a different keyboard. * Everything that said Ergodox now says Dactyl, naturally. * [whitespace] Delete trailing whitespace My editor does this automatically so it's just gonna keep cropping up... * Cut the dactyl down to the right number of columns (Remember, throughout matrix.c, everything called "row" is really a column, and vice-versa). * Remove LED-related code * Tighten up the Dactyl's build options * Whitespace cleanup in twimaster.c * Hardtabs -> spaces * No more trailing whitespace * Typo fix * Correct the CPU frequency units The Teensy's CPU definitely doesn't run at 16 petahertz... * Restore access to ONEHAND_ENABLE I turned it off in 26d47cb42622d990a7c3335e7fcc151aa3edfbf0 while desperately debugging; I just wanted to ensure it wasn't causing the problem I was seeing. It was not, in fact, causing the problem, so it's back. Also fixed the swap matrix in dactyl.c, since it still referred to columns that exist in the Ergodox but not the Dactyl. * Clearer phrasing about TWI's effect on scan rate * Fix up the Dactyl's firmware-loading instructions Sadly, the Dactyl has no hole for the onboard reset button. * Dvorak keymap for the Dactyl * The Erincalling Layout * Erincalling layout: Add a := key I've been working in Go, which uses := a lot, and it's awkward to type in this layout. * Dactyl README: link to the dactyl-keyboard repo * Add a missing copyright line I don't know how much this matters? Honestly, it's enough for me that my name is on the git commit. But hey, let's be consistent until there's a specific reason not to be, right? * Dactyl: remove commented-out code I hate it I hate it I hate it There's not even any information about what it was trying to do!!!! >:( * Add a note about the row/column ridiculousness * [whitespace] realign some constants * Don't claim B4 is tied to VCC It doesn't matter at all? I honestly don't know what the reason ever was. It looks like it dates back to the original ErgoDox and I've never seen one sentence about the purpose. I've been skipping that wire for some time, and I promise it works fine. * Dactyl keymaps: Send RALT for right-hand alt key Not terribly important but I just like things tidy OK * typo fix * Refer to "dactyl.h" explicitly QMK_SUBPROJECT_H has been working locally, but fails in CI. Strange! * Dactyl: Don't use QMK_SUBPROJECT_H at all It's still breaking in CI, even though it was a never a problem locally.
7 years ago
#----------------------------------------------------------------------------
# On command line:
#
# make = Make software.
#
# make clean = Clean out built project files.
#
# That's pretty much all you need. To compile, always go make clean,
# followed by make.
#
# For advanced users only:
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
#----------------------------------------------------------------------------
# # project specific files
SRC = twimaster.c \
matrix.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=512
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MIDI_ENABLE = no # MIDI support (+2400 to 4200)
POINTING_DEVICE_ENABLE = no
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+8000)
COMMAND_ENABLE = no # Commands for debug and configuration
CUSTOM_MATRIX = yes # Custom matrix file for the Dactyl
NKRO_ENABLE = yes # USB Nkey Rollover
UNICODE_ENABLE = yes # Unicode
ONEHAND_ENABLE = yes # Allow swapping hands of keyboard
SLEEP_LED_ENABLE = no
API_SYSEX_ENABLE = no
RGBLIGHT_ENABLE = no