You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/ergodone/readme.md

27 lines
1.2 KiB
Markdown

ErgoDone
===
![ErgoDone](https://i.imgur.com/QERsQGQ.jpg)
ErgoDone is a modified ErgoDox with pre-soldered components made by K.T.E.C. It has different wiring and uses a Pro Micro instead of Teensy.
- Keyboard Maintainer: [Yu He](http://github.com/yuhe00)
- Hardware Supported:
- ErgoDone ver. 1.3 (tested)
- Hardware Availability: [KBDFans](https://kbdfans.myshopify.com/collections/pcb/products/ergodone-keyboard-pcb-1pcs-free-shipping?variant=37178300237)
Make example for this keyboard (after setting up your build environment):
make ergodox-ergodone-default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
# Flashing the keyboard
The ErgoDone uses an HID bootloader rather than the Teensy one, and requires a different way of flashing the firmware.
1. While plugging in the USB cable, hold the two right-most keys on the left half of the ErgoDone to enter FLASH mode.
2. Use the `hid_bootloader_cli` utlity from [TKG Toolkit](https://github.com/kairyu/tkg-toolkit):
hid_bootloader_cli -mmcu=atmega32u4 ergodox_ergodone_default