You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

2407 lines
83 KiB
Plaintext

# vim:fileencoding=utf-8:foldmethod=marker
#: Fonts {{{
#: kitty has very powerful font management. You can configure
#: individual font faces and even specify special fonts for particular
#: characters.
# font_family monospace
# bold_font auto
# italic_font auto
# bold_italic_font auto
#: You can specify different fonts for the bold/italic/bold-italic
#: variants. To get a full list of supported fonts use the `kitty
#: +list-fonts` command. By default they are derived automatically, by
#: the OSes font system. When bold_font or bold_italic_font is set to
#: auto on macOS, the priority of bold fonts is semi-bold, bold,
#: heavy. Setting them manually is useful for font families that have
#: many weight variants like Book, Medium, Thick, etc. For example::
#: font_family Operator Mono Book
#: bold_font Operator Mono Medium
#: italic_font Operator Mono Book Italic
#: bold_italic_font Operator Mono Medium Italic
# font_size 11.0
#: Font size (in pts)
# force_ltr no
#: kitty does not support BIDI (bidirectional text), however, for RTL
#: scripts, words are automatically displayed in RTL. That is to say,
#: in an RTL script, the words "HELLO WORLD" display in kitty as
#: "WORLD HELLO", and if you try to select a substring of an RTL-
#: shaped string, you will get the character that would be there had
#: the string been LTR. For example, assuming the Hebrew word ירושלים,
#: selecting the character that on the screen appears to be ם actually
#: writes into the selection buffer the character י. kitty's default
#: behavior is useful in conjunction with a filter to reverse the word
#: order, however, if you wish to manipulate RTL glyphs, it can be
#: very challenging to work with, so this option is provided to turn
#: it off. Furthermore, this option can be used with the command line
#: program GNU FriBidi <https://github.com/fribidi/fribidi#executable>
#: to get BIDI support, because it will force kitty to always treat
#: the text as LTR, which FriBidi expects for terminals.
# symbol_map
#: E.g. symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols
#: Map the specified Unicode codepoints to a particular font. Useful
#: if you need special rendering for some symbols, such as for
#: Powerline. Avoids the need for patched fonts. Each Unicode code
#: point is specified in the form `U+<code point in hexadecimal>`. You
#: can specify multiple code points, separated by commas and ranges
#: separated by hyphens. This option can be specified multiple times.
#: The syntax is::
#: symbol_map codepoints Font Family Name
# narrow_symbols
#: E.g. narrow_symbols U+E0A0-U+E0A3,U+E0C0-U+E0C7 1
#: Usually, for Private Use Unicode characters and some symbol/dingbat
#: characters, if the character is followed by one or more spaces,
#: kitty will use those extra cells to render the character larger, if
#: the character in the font has a wide aspect ratio. Using this
#: option you can force kitty to restrict the specified code points to
#: render in the specified number of cells (defaulting to one cell).
#: This option can be specified multiple times. The syntax is::
#: narrow_symbols codepoints [optionally the number of cells]
# disable_ligatures never
#: Choose how you want to handle multi-character ligatures. The
#: default is to always render them. You can tell kitty to not render
#: them when the cursor is over them by using cursor to make editing
#: easier, or have kitty never render them at all by using always, if
#: you don't like them. The ligature strategy can be set per-window
#: either using the kitty remote control facility or by defining
#: shortcuts for it in kitty.conf, for example::
#: map alt+1 disable_ligatures_in active always
#: map alt+2 disable_ligatures_in all never
#: map alt+3 disable_ligatures_in tab cursor
#: Note that this refers to programming ligatures, typically
#: implemented using the calt OpenType feature. For disabling general
#: ligatures, use the font_features option.
# font_features
#: E.g. font_features none
#: Choose exactly which OpenType features to enable or disable. This
#: is useful as some fonts might have features worthwhile in a
#: terminal. For example, Fira Code includes a discretionary feature,
#: zero, which in that font changes the appearance of the zero (0), to
#: make it more easily distinguishable from Ø. Fira Code also includes
#: other discretionary features known as Stylistic Sets which have the
#: tags ss01 through ss20.
#: For the exact syntax to use for individual features, see the
#: HarfBuzz documentation <https://harfbuzz.github.io/harfbuzz-hb-
#: common.html#hb-feature-from-string>.
#: Note that this code is indexed by PostScript name, and not the font
#: family. This allows you to define very precise feature settings;
#: e.g. you can disable a feature in the italic font but not in the
#: regular font.
#: On Linux, font features are first read from the FontConfig database
#: and then this option is applied, so they can be configured in a
#: single, central place.
#: To get the PostScript name for a font, use `kitty +list-fonts
#: --psnames`:
#: .. code-block:: sh
#: $ kitty +list-fonts --psnames | grep Fira
#: Fira Code
#: Fira Code Bold (FiraCode-Bold)
#: Fira Code Light (FiraCode-Light)
#: Fira Code Medium (FiraCode-Medium)
#: Fira Code Regular (FiraCode-Regular)
#: Fira Code Retina (FiraCode-Retina)
#: The part in brackets is the PostScript name.
#: Enable alternate zero and oldstyle numerals::
#: font_features FiraCode-Retina +zero +onum
#: Enable only alternate zero in the bold font::
#: font_features FiraCode-Bold +zero
#: Disable the normal ligatures, but keep the calt feature which (in
#: this font) breaks up monotony::
#: font_features TT2020StyleB-Regular -liga +calt
#: In conjunction with force_ltr, you may want to disable Arabic
#: shaping entirely, and only look at their isolated forms if they
#: show up in a document. You can do this with e.g.::
#: font_features UnifontMedium +isol -medi -fina -init
# modify_font
#: Modify font characteristics such as the position or thickness of
#: the underline and strikethrough. The modifications can have the
#: suffix px for pixels or % for percentage of original value. No
#: suffix means use pts. For example::
#: modify_font underline_position -2
#: modify_font underline_thickness 150%
#: modify_font strikethrough_position 2px
#: Additionally, you can modify the size of the cell in which each
#: font glyph is rendered and the baseline at which the glyph is
#: placed in the cell. For example::
#: modify_font cell_width 80%
#: modify_font cell_height -2px
#: modify_font baseline 3
#: Note that modifying the baseline will automatically adjust the
#: underline and strikethrough positions by the same amount.
#: Increasing the baseline raises glyphs inside the cell and
#: decreasing it lowers them. Decreasing the cell size might cause
#: rendering artifacts, so use with care.
# box_drawing_scale 0.001, 1, 1.5, 2
#: The sizes of the lines used for the box drawing Unicode characters.
#: These values are in pts. They will be scaled by the monitor DPI to
#: arrive at a pixel value. There must be four values corresponding to
#: thin, normal, thick, and very thick lines.
# undercurl_style thin-sparse
#: The style with which undercurls are rendered. This option takes the
#: form (thin|thick)-(sparse|dense). Thin and thick control the
#: thickness of the undercurl. Sparse and dense control how often the
#: curl oscillates. With sparse the curl will peak once per character,
#: with dense twice.
# text_composition_strategy platform
#: Control how kitty composites text glyphs onto the background color.
#: The default value of platform tries for text rendering as close to
#: "native" for the platform kitty is running on as possible.
#: A value of legacy uses the old (pre kitty 0.28) strategy for how
#: glyphs are composited. This will make dark text on light
#: backgrounds look thicker and light text on dark backgrounds
#: thinner. It might also make some text appear like the strokes are
#: uneven.
#: You can fine tune the actual contrast curve used for glyph
#: composition by specifying up to two space-separated numbers for
#: this setting.
#: The first number is the gamma adjustment, which controls the
#: thickness of dark text on light backgrounds. Increasing the value
#: will make text appear thicker. The default value for this is 1.0 on
#: Linux and 1.7 on macOS. Valid values are 0.01 and above. The result
#: is scaled based on the luminance difference between the background
#: and the foreground. Dark text on light backgrounds receives the
#: full impact of the curve while light text on dark backgrounds is
#: affected very little.
#: The second number is an additional multiplicative contrast. It is
#: percentage ranging from 0 to 100. The default value is 0 on Linux
#: and 30 on macOS.
#: If you wish to achieve similar looking thickness in light and dark
#: themes, a good way to experiment is start by setting the value to
#: 1.0 0 and use a dark theme. Then adjust the second parameter until
#: it looks good. Then switch to a light theme and adjust the first
#: parameter until the perceived thickness matches the dark theme.
# text_fg_override_threshold 0
#: The minimum accepted difference in luminance between the foreground
#: and background color, below which kitty will override the
#: foreground color. It is percentage ranging from 0 to 100. If the
#: difference in luminance of the foreground and background is below
#: this threshold, the foreground color will be set to white if the
#: background is dark or black if the background is light. The default
#: value is 0, which means no overriding is performed. Useful when
#: working with applications that use colors that do not contrast well
#: with your preferred color scheme.
#: }}}
#: Cursor customization {{{
# cursor #cccccc
#: Default cursor color. If set to the special value none the cursor
#: will be rendered with a "reverse video" effect. It's color will be
#: the color of the text in the cell it is over and the text will be
#: rendered with the background color of the cell. Note that if the
#: program running in the terminal sets a cursor color, this takes
#: precedence. Also, the cursor colors are modified if the cell
#: background and foreground colors have very low contrast.
# cursor_text_color #111111
#: The color of text under the cursor. If you want it rendered with
#: the background color of the cell underneath instead, use the
#: special keyword: background. Note that if cursor is set to none
#: then this option is ignored.
# cursor_shape block
#: The cursor shape can be one of block, beam, underline. Note that
#: when reloading the config this will be changed only if the cursor
#: shape has not been set by the program running in the terminal. This
#: sets the default cursor shape, applications running in the terminal
#: can override it. In particular, shell integration
#: <https://sw.kovidgoyal.net/kitty/shell-integration/> in kitty sets
#: the cursor shape to beam at shell prompts. You can avoid this by
#: setting shell_integration to no-cursor.
# cursor_beam_thickness 1.5
#: The thickness of the beam cursor (in pts).
# cursor_underline_thickness 2.0
#: The thickness of the underline cursor (in pts).
# cursor_blink_interval -1
#: The interval to blink the cursor (in seconds). Set to zero to
#: disable blinking. Negative values mean use system default. Note
#: that the minimum interval will be limited to repaint_delay.
# cursor_stop_blinking_after 15.0
#: Stop blinking cursor after the specified number of seconds of
#: keyboard inactivity. Set to zero to never stop blinking.
#: }}}
#: Scrollback {{{
# scrollback_lines 2000
#: Number of lines of history to keep in memory for scrolling back.
#: Memory is allocated on demand. Negative numbers are (effectively)
#: infinite scrollback. Note that using very large scrollback is not
#: recommended as it can slow down performance of the terminal and
#: also use large amounts of RAM. Instead, consider using
#: scrollback_pager_history_size. Note that on config reload if this
#: is changed it will only affect newly created windows, not existing
#: ones.
# scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER
#: Program with which to view scrollback in a new window. The
#: scrollback buffer is passed as STDIN to this program. If you change
#: it, make sure the program you use can handle ANSI escape sequences
#: for colors and text formatting. INPUT_LINE_NUMBER in the command
#: line above will be replaced by an integer representing which line
#: should be at the top of the screen. Similarly CURSOR_LINE and
#: CURSOR_COLUMN will be replaced by the current cursor position or
#: set to 0 if there is no cursor, for example, when showing the last
#: command output.
# scrollback_pager_history_size 0
#: Separate scrollback history size (in MB), used only for browsing
#: the scrollback buffer with pager. This separate buffer is not
#: available for interactive scrolling but will be piped to the pager
#: program when viewing scrollback buffer in a separate window. The
#: current implementation stores the data in UTF-8, so approximately
#: 10000 lines per megabyte at 100 chars per line, for pure ASCII,
#: unformatted text. A value of zero or less disables this feature.
#: The maximum allowed size is 4GB. Note that on config reload if this
#: is changed it will only affect newly created windows, not existing
#: ones.
# scrollback_fill_enlarged_window no
#: Fill new space with lines from the scrollback buffer after
#: enlarging a window.
# wheel_scroll_multiplier 5.0
#: Multiplier for the number of lines scrolled by the mouse wheel.
#: Note that this is only used for low precision scrolling devices,
#: not for high precision scrolling devices on platforms such as macOS
#: and Wayland. Use negative numbers to change scroll direction. See
#: also wheel_scroll_min_lines.
# wheel_scroll_min_lines 1
#: The minimum number of lines scrolled by the mouse wheel. The scroll
#: multiplier wheel_scroll_multiplier only takes effect after it
#: reaches this number. Note that this is only used for low precision
#: scrolling devices like wheel mice that scroll by very small amounts
#: when using the wheel. With a negative number, the minimum number of
#: lines will always be added.
# touch_scroll_multiplier 1.0
#: Multiplier for the number of lines scrolled by a touchpad. Note
#: that this is only used for high precision scrolling devices on
#: platforms such as macOS and Wayland. Use negative numbers to change
#: scroll direction.
#: }}}
#: Mouse {{{
# mouse_hide_wait 3.0
#: Hide mouse cursor after the specified number of seconds of the
#: mouse not being used. Set to zero to disable mouse cursor hiding.
#: Set to a negative value to hide the mouse cursor immediately when
#: typing text. Disabled by default on macOS as getting it to work
#: robustly with the ever-changing sea of bugs that is Cocoa is too
#: much effort.
# url_color #0087bd
# url_style curly
#: The color and style for highlighting URLs on mouse-over. url_style
#: can be one of: none, straight, double, curly, dotted, dashed.
# open_url_with default
#: The program to open clicked URLs. The special value default with
#: first look for any URL handlers defined via the open_actions
#: <https://sw.kovidgoyal.net/kitty/open_actions/> facility and if non
#: are found, it will use the Operating System's default URL handler
#: (open on macOS and xdg-open on Linux).
# url_prefixes file ftp ftps gemini git gopher http https irc ircs kitty mailto news sftp ssh
#: The set of URL prefixes to look for when detecting a URL under the
#: mouse cursor.
# detect_urls yes
#: Detect URLs under the mouse. Detected URLs are highlighted with an
#: underline and the mouse cursor becomes a hand over them. Even if
#: this option is disabled, URLs are still clickable.
# url_excluded_characters
#: Additional characters to be disallowed from URLs, when detecting
#: URLs under the mouse cursor. By default, all characters that are
#: legal in URLs are allowed. Additionally, newlines are allowed (but
#: stripped). This is to accommodate programs such as mutt that add
#: hard line breaks even for continued lines. \n can be added to this
#: option to disable this behavior. Special characters can be
#: specified using backslash escapes, to specify a backslash use a
#: double backslash.
# show_hyperlink_targets no
#: When the mouse hovers over a terminal hyperlink, show the actual
#: URL that will be activated when the hyperlink is clicked.
# copy_on_select no
#: Copy to clipboard or a private buffer on select. With this set to
#: clipboard, selecting text with the mouse will cause the text to be
#: copied to clipboard. Useful on platforms such as macOS that do not
#: have the concept of primary selection. You can instead specify a
#: name such as a1 to copy to a private kitty buffer. Map a shortcut
#: with the paste_from_buffer action to paste from this private
#: buffer. For example::
#: copy_on_select a1
#: map shift+cmd+v paste_from_buffer a1
#: Note that copying to the clipboard is a security risk, as all
#: programs, including websites open in your browser can read the
#: contents of the system clipboard.
# paste_actions quote-urls-at-prompt
#: A comma separated list of actions to take when pasting text into
#: the terminal. The supported paste actions are:
#: quote-urls-at-prompt:
#: If the text being pasted is a URL and the cursor is at a shell prompt,
#: automatically quote the URL (needs shell_integration).
#: confirm:
#: Confirm the paste if bracketed paste mode is not active or there is
#: a large amount of text being pasted.
#: filter:
#: Run the filter_paste() function from the file paste-actions.py in
#: the kitty config directory on the pasted text. The text returned by the
#: function will be actually pasted.
# strip_trailing_spaces never
#: Remove spaces at the end of lines when copying to clipboard. A
#: value of smart will do it when using normal selections, but not
#: rectangle selections. A value of always will always do it.
# select_by_word_characters @-./_~?&=%+#
#: Characters considered part of a word when double clicking. In
#: addition to these characters any character that is marked as an
#: alphanumeric character in the Unicode database will be matched.
# select_by_word_characters_forward
#: Characters considered part of a word when extending the selection
#: forward on double clicking. In addition to these characters any
#: character that is marked as an alphanumeric character in the
#: Unicode database will be matched.
#: If empty (default) select_by_word_characters will be used for both
#: directions.
# click_interval -1.0
#: The interval between successive clicks to detect double/triple
#: clicks (in seconds). Negative numbers will use the system default
#: instead, if available, or fallback to 0.5.
# focus_follows_mouse no
#: Set the active window to the window under the mouse when moving the
#: mouse around.
# pointer_shape_when_grabbed arrow
#: The shape of the mouse pointer when the program running in the
#: terminal grabs the mouse. Valid values are: arrow, beam and hand.
# default_pointer_shape beam
#: The default shape of the mouse pointer. Valid values are: arrow,
#: beam and hand.
# pointer_shape_when_dragging beam
#: The default shape of the mouse pointer when dragging across text.
#: Valid values are: arrow, beam and hand.
#: Mouse actions {{{
#: Mouse buttons can be mapped to perform arbitrary actions. The
#: syntax is:
#: .. code-block:: none
#: mouse_map button-name event-type modes action
#: Where button-name is one of left, middle, right, b1 ... b8 with
#: added keyboard modifiers. For example: ctrl+shift+left refers to
#: holding the Ctrl+Shift keys while clicking with the left mouse
#: button. The value b1 ... b8 can be used to refer to up to eight
#: buttons on a mouse.
#: event-type is one of press, release, doublepress, triplepress,
#: click, doubleclick. modes indicates whether the action is performed
#: when the mouse is grabbed by the program running in the terminal,
#: or not. The values are grabbed or ungrabbed or a comma separated
#: combination of them. grabbed refers to when the program running in
#: the terminal has requested mouse events. Note that the click and
#: double click events have a delay of click_interval to disambiguate
#: from double and triple presses.
#: You can run kitty with the kitty --debug-input command line option
#: to see mouse events. See the builtin actions below to get a sense
#: of what is possible.
#: If you want to unmap an action, map it to no_op. For example, to
#: disable opening of URLs with a plain click::
#: mouse_map left click ungrabbed no_op
#: See all the mappable actions including mouse actions here
#: <https://sw.kovidgoyal.net/kitty/actions/>.
#: .. note::
#: Once a selection is started, releasing the button that started it will
#: automatically end it and no release event will be dispatched.
# clear_all_mouse_actions no
#: Remove all mouse action definitions up to this point. Useful, for
#: instance, to remove the default mouse actions.
#: Click the link under the mouse or move the cursor
# mouse_map left click ungrabbed mouse_handle_click selection link prompt
#:: First check for a selection and if one exists do nothing. Then
#:: check for a link under the mouse cursor and if one exists, click
#:: it. Finally check if the click happened at the current shell
#:: prompt and if so, move the cursor to the click location. Note
#:: that this requires shell integration
#:: <https://sw.kovidgoyal.net/kitty/shell-integration/> to work.
#: Click the link under the mouse or move the cursor even when grabbed
# mouse_map shift+left click grabbed,ungrabbed mouse_handle_click selection link prompt
#:: Same as above, except that the action is performed even when the
#:: mouse is grabbed by the program running in the terminal.
#: Click the link under the mouse cursor
# mouse_map ctrl+shift+left release grabbed,ungrabbed mouse_handle_click link
#:: Variant with Ctrl+Shift is present because the simple click based
#:: version has an unavoidable delay of click_interval, to
#:: disambiguate clicks from double clicks.
#: Discard press event for link click
# mouse_map ctrl+shift+left press grabbed discard_event
#:: Prevent this press event from being sent to the program that has
#:: grabbed the mouse, as the corresponding release event is used to
#:: open a URL.
#: Paste from the primary selection
# mouse_map middle release ungrabbed paste_from_selection
#: Start selecting text
# mouse_map left press ungrabbed mouse_selection normal
#: Start selecting text in a rectangle
# mouse_map ctrl+alt+left press ungrabbed mouse_selection rectangle
#: Select a word
# mouse_map left doublepress ungrabbed mouse_selection word
#: Select a line
# mouse_map left triplepress ungrabbed mouse_selection line
#: Select line from point
# mouse_map ctrl+alt+left triplepress ungrabbed mouse_selection line_from_point
#:: Select from the clicked point to the end of the line.
#: Extend the current selection
# mouse_map right press ungrabbed mouse_selection extend
#:: If you want only the end of the selection to be moved instead of
#:: the nearest boundary, use move-end instead of extend.
#: Paste from the primary selection even when grabbed
# mouse_map shift+middle release ungrabbed,grabbed paste_selection
# mouse_map shift+middle press grabbed discard_event
#: Start selecting text even when grabbed
# mouse_map shift+left press ungrabbed,grabbed mouse_selection normal
#: Start selecting text in a rectangle even when grabbed
# mouse_map ctrl+shift+alt+left press ungrabbed,grabbed mouse_selection rectangle
#: Select a word even when grabbed
# mouse_map shift+left doublepress ungrabbed,grabbed mouse_selection word
#: Select a line even when grabbed
# mouse_map shift+left triplepress ungrabbed,grabbed mouse_selection line
#: Select line from point even when grabbed
# mouse_map ctrl+shift+alt+left triplepress ungrabbed,grabbed mouse_selection line_from_point
#:: Select from the clicked point to the end of the line even when
#:: grabbed.
#: Extend the current selection even when grabbed
# mouse_map shift+right press ungrabbed,grabbed mouse_selection extend
#: Show clicked command output in pager
# mouse_map ctrl+shift+right press ungrabbed mouse_show_command_output
#:: Requires shell integration
#:: <https://sw.kovidgoyal.net/kitty/shell-integration/> to work.
#: }}}
#: }}}
#: Performance tuning {{{
# repaint_delay 10
#: Delay between screen updates (in milliseconds). Decreasing it,
#: increases frames-per-second (FPS) at the cost of more CPU usage.
#: The default value yields ~100 FPS which is more than sufficient for
#: most uses. Note that to actually achieve 100 FPS, you have to
#: either set sync_to_monitor to no or use a monitor with a high
#: refresh rate. Also, to minimize latency when there is pending input
#: to be processed, this option is ignored.
# input_delay 3
#: Delay before input from the program running in the terminal is
#: processed (in milliseconds). Note that decreasing it will increase
#: responsiveness, but also increase CPU usage and might cause flicker
#: in full screen programs that redraw the entire screen on each loop,
#: because kitty is so fast that partial screen updates will be drawn.
# sync_to_monitor yes
#: Sync screen updates to the refresh rate of the monitor. This
#: prevents screen tearing
#: <https://en.wikipedia.org/wiki/Screen_tearing> when scrolling.
#: However, it limits the rendering speed to the refresh rate of your
#: monitor. With a very high speed mouse/high keyboard repeat rate,
#: you may notice some slight input latency. If so, set this to no.
#: }}}
#: Terminal bell {{{
# enable_audio_bell yes
#: The audio bell. Useful to disable it in environments that require
#: silence.
# visual_bell_duration 0.0
#: The visual bell duration (in seconds). Flash the screen when a bell
#: occurs for the specified number of seconds. Set to zero to disable.
# visual_bell_color none
#: The color used by visual bell. Set to none will fall back to
#: selection background color. If you feel that the visual bell is too
#: bright, you can set it to a darker color.
# window_alert_on_bell yes
#: Request window attention on bell. Makes the dock icon bounce on
#: macOS or the taskbar flash on linux.
# bell_on_tab "🔔 "
#: Some text or a Unicode symbol to show on the tab if a window in the
#: tab that does not have focus has a bell. If you want to use leading
#: or trailing spaces, surround the text with quotes. See
#: tab_title_template for how this is rendered.
#: For backwards compatibility, values of yes, y and true are
#: converted to the default bell symbol and no, n, false and none are
#: converted to the empty string.
# command_on_bell none
#: Program to run when a bell occurs. The environment variable
#: KITTY_CHILD_CMDLINE can be used to get the program running in the
#: window in which the bell occurred.
# bell_path none
#: Path to a sound file to play as the bell sound. If set to none, the
#: system default bell sound is used. Must be in a format supported by
#: the operating systems sound API, such as WAV or OGA on Linux
#: (libcanberra) or AIFF, MP3 or WAV on macOS (NSSound)
# linux_bell_theme __custom
#: The XDG Sound Theme kitty will use to play the bell sound. Defaults
#: to the custom theme name used by GNOME and Budgie, falling back to
#: the default freedesktop theme if it does not exist. This option may
#: be removed if Linux ever provides desktop-agnostic support for
#: setting system sound themes.
#: }}}
#: Window layout {{{
# remember_window_size yes
# initial_window_width 640
# initial_window_height 400
#: If enabled, the OS Window size will be remembered so that new
#: instances of kitty will have the same size as the previous
#: instance. If disabled, the OS Window will initially have size
#: configured by initial_window_width/height, in pixels. You can use a
#: suffix of "c" on the width/height values to have them interpreted
#: as number of cells instead of pixels.
# enabled_layouts *
#: The enabled window layouts. A comma separated list of layout names.
#: The special value all means all layouts. The first listed layout
#: will be used as the startup layout. Default configuration is all
#: layouts in alphabetical order. For a list of available layouts, see
#: the layouts <https://sw.kovidgoyal.net/kitty/overview/#layouts>.
# window_resize_step_cells 2
# window_resize_step_lines 2
#: The step size (in units of cell width/cell height) to use when
#: resizing kitty windows in a layout with the shortcut
#: start_resizing_window. The cells value is used for horizontal
#: resizing, and the lines value is used for vertical resizing.
# window_border_width 0.5pt
#: The width of window borders. Can be either in pixels (px) or pts
#: (pt). Values in pts will be rounded to the nearest number of pixels
#: based on screen resolution. If not specified, the unit is assumed
#: to be pts. Note that borders are displayed only when more than one
#: window is visible. They are meant to separate multiple windows.
# draw_minimal_borders yes
#: Draw only the minimum borders needed. This means that only the
#: borders that separate the window from a neighbor are drawn. Note
#: that setting a non-zero window_margin_width overrides this and
#: causes all borders to be drawn.
# window_margin_width 0
#: The window margin (in pts) (blank area outside the border). A
#: single value sets all four sides. Two values set the vertical and
#: horizontal sides. Three values set top, horizontal and bottom. Four
#: values set top, right, bottom and left.
# single_window_margin_width -1
#: The window margin to use when only a single window is visible (in
#: pts). Negative values will cause the value of window_margin_width
#: to be used instead. A single value sets all four sides. Two values
#: set the vertical and horizontal sides. Three values set top,
#: horizontal and bottom. Four values set top, right, bottom and left.
# window_padding_width 0
#: The window padding (in pts) (blank area between the text and the
#: window border). A single value sets all four sides. Two values set
#: the vertical and horizontal sides. Three values set top, horizontal
#: and bottom. Four values set top, right, bottom and left.
# placement_strategy center
#: When the window size is not an exact multiple of the cell size, the
#: cell area of the terminal window will have some extra padding on
#: the sides. You can control how that padding is distributed with
#: this option. Using a value of center means the cell area will be
#: placed centrally. A value of top-left means the padding will be
#: only at the bottom and right edges.
# active_border_color #00ff00
#: The color for the border of the active window. Set this to none to
#: not draw borders around the active window.
# inactive_border_color #cccccc
#: The color for the border of inactive windows.
# bell_border_color #ff5a00
#: The color for the border of inactive windows in which a bell has
#: occurred.
# inactive_text_alpha 1.0
#: Fade the text in inactive windows by the specified amount (a number
#: between zero and one, with zero being fully faded).
# hide_window_decorations no
#: Hide the window decorations (title-bar and window borders) with
#: yes. On macOS, titlebar-only and titlebar-and-corners can be used
#: to only hide the titlebar and the rounded corners. Whether this
#: works and exactly what effect it has depends on the window
#: manager/operating system. Note that the effects of changing this
#: option when reloading config are undefined. When using titlebar-
#: only, it is useful to also set window_margin_width and
#: placement_strategy to prevent the rounded corners from clipping
#: text. Or use titlebar-and-corners.
# window_logo_path none
#: Path to a logo image. Must be in PNG format. Relative paths are
#: interpreted relative to the kitty config directory. The logo is
#: displayed in a corner of every kitty window. The position is
#: controlled by window_logo_position. Individual windows can be
#: configured to have different logos either using the launch action
#: or the remote control <https://sw.kovidgoyal.net/kitty/remote-
#: control/> facility.
# window_logo_position bottom-right
#: Where to position the window logo in the window. The value can be
#: one of: top-left, top, top-right, left, center, right, bottom-left,
#: bottom, bottom-right.
# window_logo_alpha 0.5
#: The amount the logo should be faded into the background. With zero
#: being fully faded and one being fully opaque.
# resize_debounce_time 0.1 0.5
#: The time to wait before redrawing the screen during a live resize
#: of the OS window, when no new resize events have been received,
#: i.e. when resizing is either paused or finished. On platforms such
#: as macOS, where the operating system sends events corresponding to
#: the start and end of a live resize, the second number is used for
#: redraw-after-pause since kitty can distinguish between a pause and
#: end of resizing. On such systems the first number is ignored and
#: redraw is immediate after end of resize. On other systems the
#: first number is used so that kitty is "ready" quickly after the end
#: of resizing, while not also continuously redrawing, to save energy.
# resize_in_steps no
#: Resize the OS window in steps as large as the cells, instead of
#: with the usual pixel accuracy. Combined with initial_window_width
#: and initial_window_height in number of cells, this option can be
#: used to keep the margins as small as possible when resizing the OS
#: window. Note that this does not currently work on Wayland.
# visual_window_select_characters 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZ
#: The list of characters for visual window selection. For example,
#: for selecting a window to focus on with focus_visible_window. The
#: value should be a series of unique numbers or alphabets, case
#: insensitive, from the set 0-9A-Z\-=[];',./\\`. Specify your
#: preference as a string of characters.
# confirm_os_window_close -1
#: Ask for confirmation when closing an OS window or a tab with at
#: least this number of kitty windows in it by window manager (e.g.
#: clicking the window close button or pressing the operating system
#: shortcut to close windows) or by the close_tab action. A value of
#: zero disables confirmation. This confirmation also applies to
#: requests to quit the entire application (all OS windows, via the
#: quit action). Negative values are converted to positive ones,
#: however, with shell_integration enabled, using negative values
#: means windows sitting at a shell prompt are not counted, only
#: windows where some command is currently running. Note that if you
#: want confirmation when closing individual windows, you can map the
#: close_window_with_confirmation action.
#: }}}
#: Tab bar {{{
# tab_bar_edge bottom
#: The edge to show the tab bar on, top or bottom.
# tab_bar_margin_width 0.0
#: The margin to the left and right of the tab bar (in pts).
# tab_bar_margin_height 0.0 0.0
#: The margin above and below the tab bar (in pts). The first number
#: is the margin between the edge of the OS Window and the tab bar.
#: The second number is the margin between the tab bar and the
#: contents of the current tab.
# tab_bar_style fade
#: The tab bar style, can be one of:
#: fade
#: Each tab's edges fade into the background color. (See also tab_fade)
#: slant
#: Tabs look like the tabs in a physical file.
#: separator
#: Tabs are separated by a configurable separator. (See also
#: tab_separator)
#: powerline
#: Tabs are shown as a continuous line with "fancy" separators.
#: (See also tab_powerline_style)
#: custom
#: A user-supplied Python function called draw_tab is loaded from the file
#: tab_bar.py in the kitty config directory. For examples of how to
#: write such a function, see the functions named draw_tab_with_* in
#: kitty's source code: kitty/tab_bar.py. See also
#: this discussion <https://github.com/kovidgoyal/kitty/discussions/4447>
#: for examples from kitty users.
#: hidden
#: The tab bar is hidden. If you use this, you might want to create
#: a mapping for the select_tab action which presents you with a list of
#: tabs and allows for easy switching to a tab.
# tab_bar_align left
#: The horizontal alignment of the tab bar, can be one of: left,
#: center, right.
# tab_bar_min_tabs 2
#: The minimum number of tabs that must exist before the tab bar is
#: shown.
# tab_switch_strategy previous
#: The algorithm to use when switching to a tab when the current tab
#: is closed. The default of previous will switch to the last used
#: tab. A value of left will switch to the tab to the left of the
#: closed tab. A value of right will switch to the tab to the right of
#: the closed tab. A value of last will switch to the right-most tab.
# tab_fade 0.25 0.5 0.75 1
#: Control how each tab fades into the background when using fade for
#: the tab_bar_style. Each number is an alpha (between zero and one)
#: that controls how much the corresponding cell fades into the
#: background, with zero being no fade and one being full fade. You
#: can change the number of cells used by adding/removing entries to
#: this list.
# tab_separator " ┇"
#: The separator between tabs in the tab bar when using separator as
#: the tab_bar_style.
# tab_powerline_style angled
#: The powerline separator style between tabs in the tab bar when
#: using powerline as the tab_bar_style, can be one of: angled,
#: slanted, round.
# tab_activity_symbol none
#: Some text or a Unicode symbol to show on the tab if a window in the
#: tab that does not have focus has some activity. If you want to use
#: leading or trailing spaces, surround the text with quotes. See
#: tab_title_template for how this is rendered.
# tab_title_max_length 0
#: The maximum number of cells that can be used to render the text in
#: a tab. A value of zero means that no limit is applied.
# tab_title_template "{fmt.fg.red}{bell_symbol}{activity_symbol}{fmt.fg.tab}{title}"
#: A template to render the tab title. The default just renders the
#: title with optional symbols for bell and activity. If you wish to
#: include the tab-index as well, use something like: {index}:{title}.
#: Useful if you have shortcuts mapped for goto_tab N. If you prefer
#: to see the index as a superscript, use {sup.index}. All data
#: available is:
#: title
#: The current tab title.
#: index
#: The tab index usable with goto_tab N goto_tab shortcuts.
#: layout_name
#: The current layout name.
#: num_windows
#: The number of windows in the tab.
#: num_window_groups
#: The number of window groups (a window group is a window and all of its overlay windows) in the tab.
#: tab.active_wd
#: The working directory of the currently active window in the tab
#: (expensive, requires syscall). Use active_oldest_wd to get
#: the directory of the oldest foreground process rather than the newest.
#: tab.active_exe
#: The name of the executable running in the foreground of the currently
#: active window in the tab (expensive, requires syscall). Use
#: active_oldest_exe for the oldest foreground process.
#: max_title_length
#: The maximum title length available.
#: Note that formatting is done by Python's string formatting
#: machinery, so you can use, for instance, {layout_name[:2].upper()}
#: to show only the first two letters of the layout name, upper-cased.
#: If you want to style the text, you can use styling directives, for
#: example:
#: `{fmt.fg.red}red{fmt.fg.tab}normal{fmt.bg._00FF00}greenbg{fmt.bg.tab}`.
#: Similarly, for bold and italic:
#: `{fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}`.
#: Note that for backward compatibility, if {bell_symbol} or
#: {activity_symbol} are not present in the template, they are
#: prepended to it.
# active_tab_title_template none
#: Template to use for active tabs. If not specified falls back to
#: tab_title_template.
# active_tab_foreground #000
# active_tab_background #eee
# active_tab_font_style bold-italic
# inactive_tab_foreground #444
# inactive_tab_background #999
# inactive_tab_font_style normal
#: Tab bar colors and styles.
# tab_bar_background none
#: Background color for the tab bar. Defaults to using the terminal
#: background color.
# tab_bar_margin_color none
#: Color for the tab bar margin area. Defaults to using the terminal
#: background color for margins above and below the tab bar. For side
#: margins the default color is chosen to match the background color
#: of the neighboring tab.
#: }}}
#: Color scheme {{{
# foreground #dddddd
# background #000000
#: The foreground and background colors.
# background_opacity 1.0
#: The opacity of the background. A number between zero and one, where
#: one is opaque and zero is fully transparent. This will only work if
#: supported by the OS (for instance, when using a compositor under
#: X11). Note that it only sets the background color's opacity in
#: cells that have the same background color as the default terminal
#: background, so that things like the status bar in vim, powerline
#: prompts, etc. still look good. But it means that if you use a color
#: theme with a background color in your editor, it will not be
#: rendered as transparent. Instead you should change the default
#: background color in your kitty config and not use a background
#: color in the editor color scheme. Or use the escape codes to set
#: the terminals default colors in a shell script to launch your
#: editor. Be aware that using a value less than 1.0 is a (possibly
#: significant) performance hit. When using a low value for this
#: setting, it is desirable that you set the background color to a
#: color the matches the general color of the desktop background, for
#: best text rendering. If you want to dynamically change
#: transparency of windows, set dynamic_background_opacity to yes
#: (this is off by default as it has a performance cost). Changing
#: this option when reloading the config will only work if
#: dynamic_background_opacity was enabled in the original config.
# background_blur 0
#: Set to a positive value to enable background blur (blurring of the
#: visuals behind a transparent window) on platforms that support it.
#: Only takes effect when background_opacity is less than one. On
#: macOS, this will also control the blur radius (amount of blurring).
#: Setting it to too high a value will cause severe performance issues
#: and/or rendering artifacts. Usually, values up to 64 work well.
#: Note that this might cause performance issues, depending on how the
#: platform implements it, so use with care. Currently supported on
#: macOS and KDE under X11.
# background_image none
#: Path to a background image. Must be in PNG format.
# background_image_layout tiled
#: Whether to tile, scale or clamp the background image. The value can
#: be one of tiled, mirror-tiled, scaled, clamped, centered or
#: cscaled. The scaled and cscaled values scale the image to the
#: window size, with cscaled preserving the image aspect ratio.
# background_image_linear no
#: When background image is scaled, whether linear interpolation
#: should be used.
# dynamic_background_opacity no
#: Allow changing of the background_opacity dynamically, using either
#: keyboard shortcuts (increase_background_opacity and
#: decrease_background_opacity) or the remote control facility.
#: Changing this option by reloading the config is not supported.
# background_tint 0.0
#: How much to tint the background image by the background color. This
#: option makes it easier to read the text. Tinting is done using the
#: current background color for each window. This option applies only
#: if background_opacity is set and transparent windows are supported
#: or background_image is set.
# background_tint_gaps 1.0
#: How much to tint the background image at the window gaps by the
#: background color, after applying background_tint. Since this is
#: multiplicative with background_tint, it can be used to lighten the
#: tint over the window gaps for a *separated* look.
# dim_opacity 0.4
#: How much to dim text that has the DIM/FAINT attribute set. One
#: means no dimming and zero means fully dimmed (i.e. invisible).
# selection_foreground #000000
# selection_background #fffacd
#: The foreground and background colors for text selected with the
#: mouse. Setting both of these to none will cause a "reverse video"
#: effect for selections, where the selection will be the cell text
#: color and the text will become the cell background color. Setting
#: only selection_foreground to none will cause the foreground color
#: to be used unchanged. Note that these colors can be overridden by
#: the program running in the terminal.
#: The color table {{{
#: The 256 terminal colors. There are 8 basic colors, each color has a
#: dull and bright version, for the first 16 colors. You can set the
#: remaining 240 colors as color16 to color255.
# color0 #000000
# color8 #767676
#: black
# color1 #cc0403
# color9 #f2201f
#: red
# color2 #19cb00
# color10 #23fd00
#: green
# color3 #cecb00
# color11 #fffd00
#: yellow
# color4 #0d73cc
# color12 #1a8fff
#: blue
# color5 #cb1ed1
# color13 #fd28ff
#: magenta
# color6 #0dcdcd
# color14 #14ffff
#: cyan
# color7 #dddddd
# color15 #ffffff
#: white
# mark1_foreground black
#: Color for marks of type 1
# mark1_background #98d3cb
#: Color for marks of type 1 (light steel blue)
# mark2_foreground black
#: Color for marks of type 2
# mark2_background #f2dcd3
#: Color for marks of type 1 (beige)
# mark3_foreground black
#: Color for marks of type 3
# mark3_background #f274bc
#: Color for marks of type 3 (violet)
#: }}}
#: }}}
#: Advanced {{{
# shell .
#: The shell program to execute. The default value of . means to use
#: whatever shell is set as the default shell for the current user.
#: Note that on macOS if you change this, you might need to add
#: --login and --interactive to ensure that the shell starts in
#: interactive mode and reads its startup rc files.
# editor .
#: The terminal based text editor (such as vim or nano) to use when
#: editing the kitty config file or similar tasks.
#: The default value of . means to use the environment variables
#: VISUAL and EDITOR in that order. If these variables aren't set,
#: kitty will run your shell ($SHELL -l -i -c env) to see if your
#: shell startup rc files set VISUAL or EDITOR. If that doesn't work,
#: kitty will cycle through various known editors (vim, emacs, etc.)
#: and take the first one that exists on your system.
# close_on_child_death no
#: Close the window when the child process (shell) exits. With the
#: default value no, the terminal will remain open when the child
#: exits as long as there are still processes outputting to the
#: terminal (for example disowned or backgrounded processes). When
#: enabled with yes, the window will close as soon as the child
#: process exits. Note that setting it to yes means that any
#: background processes still using the terminal can fail silently
#: because their stdout/stderr/stdin no longer work.
# remote_control_password
#: Allow other programs to control kitty using passwords. This option
#: can be specified multiple times to add multiple passwords. If no
#: passwords are present kitty will ask the user for permission if a
#: program tries to use remote control with a password. A password can
#: also *optionally* be associated with a set of allowed remote
#: control actions. For example::
#: remote_control_password "my passphrase" get-colors set-colors focus-window focus-tab
#: Only the specified actions will be allowed when using this
#: password. Glob patterns can be used too, for example::
#: remote_control_password "my passphrase" set-tab-* resize-*
#: To get a list of available actions, run::
#: kitten @ --help
#: A set of actions to be allowed when no password is sent can be
#: specified by using an empty password. For example::
#: remote_control_password "" *-colors
#: Finally, the path to a python module can be specified that provides
#: a function is_cmd_allowed that is used to check every remote
#: control command. For example::
#: remote_control_password "my passphrase" my_rc_command_checker.py
#: Relative paths are resolved from the kitty configuration directory.
#: See rc_custom_auth <https://sw.kovidgoyal.net/kitty/remote-
#: control/#rc-custom-auth> for details.
# allow_remote_control no
#: Allow other programs to control kitty. If you turn this on, other
#: programs can control all aspects of kitty, including sending text
#: to kitty windows, opening new windows, closing windows, reading the
#: content of windows, etc. Note that this even works over SSH
#: connections. The default setting of no prevents any form of remote
#: control. The meaning of the various values are:
#: password
#: Remote control requests received over both the TTY device and the socket
#: are confirmed based on passwords, see remote_control_password.
#: socket-only
#: Remote control requests received over a socket are accepted
#: unconditionally. Requests received over the TTY are denied.
#: See listen_on.
#: socket
#: Remote control requests received over a socket are accepted
#: unconditionally. Requests received over the TTY are confirmed based on
#: password.
#: no
#: Remote control is completely disabled.
#: yes
#: Remote control requests are always accepted.
# listen_on none
#: Listen to the specified socket for remote control connections. Note
#: that this will apply to all kitty instances. It can be overridden
#: by the kitty --listen-on command line option. For UNIX sockets,
#: such as unix:${TEMP}/mykitty or unix:@mykitty (on Linux).
#: Environment variables are expanded and relative paths are resolved
#: with respect to the temporary directory. If {kitty_pid} is present,
#: then it is replaced by the PID of the kitty process, otherwise the
#: PID of the kitty process is appended to the value, with a hyphen.
#: For TCP sockets such as tcp:localhost:0 a random port is always
#: used even if a non-zero port number is specified. See the help for
#: kitty --listen-on for more details. Note that this will be ignored
#: unless allow_remote_control is set to either: yes, socket or
#: socket-only. Changing this option by reloading the config is not
#: supported.
# env
#: Specify the environment variables to be set in all child processes.
#: Using the name with an equal sign (e.g. env VAR=) will set it to
#: the empty string. Specifying only the name (e.g. env VAR) will
#: remove the variable from the child process' environment. Note that
#: environment variables are expanded recursively, for example::
#: env VAR1=a
#: env VAR2=${HOME}/${VAR1}/b
#: The value of VAR2 will be <path to home directory>/a/b.
# watcher
#: Path to python file which will be loaded for watchers
#: <https://sw.kovidgoyal.net/kitty/launch/#watchers>. Can be
#: specified more than once to load multiple watchers. The watchers
#: will be added to every kitty window. Relative paths are resolved
#: relative to the kitty config directory. Note that reloading the
#: config will only affect windows created after the reload.
# exe_search_path
#: Control where kitty finds the programs to run. The default search
#: order is: First search the system wide PATH, then ~/.local/bin and
#: ~/bin. If still not found, the PATH defined in the login shell
#: after sourcing all its startup files is tried. Finally, if present,
#: the PATH specified by the env option is tried.
#: This option allows you to prepend, append, or remove paths from
#: this search order. It can be specified multiple times for multiple
#: paths. A simple path will be prepended to the search order. A path
#: that starts with the + sign will be append to the search order,
#: after ~/bin above. A path that starts with the - sign will be
#: removed from the entire search order. For example::
#: exe_search_path /some/prepended/path
#: exe_search_path +/some/appended/path
#: exe_search_path -/some/excluded/path
# update_check_interval 24
#: The interval to periodically check if an update to kitty is
#: available (in hours). If an update is found, a system notification
#: is displayed informing you of the available update. The default is
#: to check every 24 hours, set to zero to disable. Update checking is
#: only done by the official binary builds. Distro packages or source
#: builds do not do update checking. Changing this option by reloading
#: the config is not supported.
# startup_session none
#: Path to a session file to use for all kitty instances. Can be
#: overridden by using the kitty --session =none command line option
#: for individual instances. See sessions
#: <https://sw.kovidgoyal.net/kitty/overview/#sessions> in the kitty
#: documentation for details. Note that relative paths are interpreted
#: with respect to the kitty config directory. Environment variables
#: in the path are expanded. Changing this option by reloading the
#: config is not supported.
# clipboard_control write-clipboard write-primary read-clipboard-ask read-primary-ask
#: Allow programs running in kitty to read and write from the
#: clipboard. You can control exactly which actions are allowed. The
#: possible actions are: write-clipboard, read-clipboard, write-
#: primary, read-primary, read-clipboard-ask, read-primary-ask. The
#: default is to allow writing to the clipboard and primary selection
#: and to ask for permission when a program tries to read from the
#: clipboard. Note that disabling the read confirmation is a security
#: risk as it means that any program, even the ones running on a
#: remote server via SSH can read your clipboard. See also
#: clipboard_max_size.
# clipboard_max_size 512
#: The maximum size (in MB) of data from programs running in kitty
#: that will be stored for writing to the system clipboard. A value of
#: zero means no size limit is applied. See also clipboard_control.
# file_transfer_confirmation_bypass
#: The password that can be supplied to the file transfer kitten
#: <https://sw.kovidgoyal.net/kitty/kittens/transfer/> to skip the
#: transfer confirmation prompt. This should only be used when
#: initiating transfers from trusted computers, over trusted networks
#: or encrypted transports, as it allows any programs running on the
#: remote machine to read/write to the local filesystem, without
#: permission.
# allow_hyperlinks yes
#: Process hyperlink escape sequences (OSC 8). If disabled OSC 8
#: escape sequences are ignored. Otherwise they become clickable
#: links, that you can click with the mouse or by using the hints
#: kitten <https://sw.kovidgoyal.net/kitty/kittens/hints/>. The
#: special value of ask means that kitty will ask before opening the
#: link when clicked.
# shell_integration enabled
#: Enable shell integration on supported shells. This enables features
#: such as jumping to previous prompts, browsing the output of the
#: previous command in a pager, etc. on supported shells. Set to
#: disabled to turn off shell integration, completely. It is also
#: possible to disable individual features, set to a space separated
#: list of these values: no-rc, no-cursor, no-title, no-cwd, no-
#: prompt-mark, no-complete. See Shell integration
#: <https://sw.kovidgoyal.net/kitty/shell-integration/> for details.
# allow_cloning ask
#: Control whether programs running in the terminal can request new
#: windows to be created. The canonical example is clone-in-kitty
#: <https://sw.kovidgoyal.net/kitty/shell-integration/#clone-shell>.
#: By default, kitty will ask for permission for each clone request.
#: Allowing cloning unconditionally gives programs running in the
#: terminal (including over SSH) permission to execute arbitrary code,
#: as the user who is running the terminal, on the computer that the
#: terminal is running on.
# clone_source_strategies venv,conda,env_var,path
#: Control what shell code is sourced when running clone-in-kitty in
#: the newly cloned window. The supported strategies are:
#: venv
#: Source the file $VIRTUAL_ENV/bin/activate. This is used by the
#: Python stdlib venv module and allows cloning venvs automatically.
#: conda
#: Run conda activate $CONDA_DEFAULT_ENV. This supports the virtual
#: environments created by conda.
#: env_var
#: Execute the contents of the environment variable
#: KITTY_CLONE_SOURCE_CODE with eval.
#: path
#: Source the file pointed to by the environment variable
#: KITTY_CLONE_SOURCE_PATH.
#: This option must be a comma separated list of the above values.
#: Only the first valid match, in the order specified, is sourced.
# term xterm-kitty
#: The value of the TERM environment variable to set. Changing this
#: can break many terminal programs, only change it if you know what
#: you are doing, not because you read some advice on "Stack Overflow"
#: to change it. The TERM variable is used by various programs to get
#: information about the capabilities and behavior of the terminal. If
#: you change it, depending on what programs you run, and how
#: different the terminal you are changing it to is, various things
#: from key-presses, to colors, to various advanced features may not
#: work. Changing this option by reloading the config will only affect
#: newly created windows.
# forward_stdio no
#: Forward STDOUT and STDERR of the kitty process to child processes
#: as file descriptors 3 and 4. This is useful for debugging as it
#: allows child processes to print to kitty's STDOUT directly. For
#: example, echo hello world >&3 in a shell will print to the parent
#: kitty's STDOUT. When enabled, this also sets the
#: KITTY_STDIO_FORWARDED=3 environment variable so child processes
#: know about the forwarding.
#: }}}
#: OS specific tweaks {{{
# wayland_titlebar_color system
#: The color of the kitty window's titlebar on Wayland systems with
#: client side window decorations such as GNOME. A value of system
#: means to use the default system color, a value of background means
#: to use the background color of the currently active window and
#: finally you can use an arbitrary color, such as #12af59 or red.
# macos_titlebar_color system
#: The color of the kitty window's titlebar on macOS. A value of
#: system means to use the default system color, light or dark can
#: also be used to set it explicitly. A value of background means to
#: use the background color of the currently active window and finally
#: you can use an arbitrary color, such as #12af59 or red. WARNING:
#: This option works by using a hack when arbitrary color (or
#: background) is configured, as there is no proper Cocoa API for it.
#: It sets the background color of the entire window and makes the
#: titlebar transparent. As such it is incompatible with
#: background_opacity. If you want to use both, you are probably
#: better off just hiding the titlebar with hide_window_decorations.
# macos_option_as_alt no
#: Use the Option key as an Alt key on macOS. With this set to no,
#: kitty will use the macOS native Option+Key to enter Unicode
#: character behavior. This will break any Alt+Key keyboard shortcuts
#: in your terminal programs, but you can use the macOS Unicode input
#: technique. You can use the values: left, right or both to use only
#: the left, right or both Option keys as Alt, instead. Note that
#: kitty itself always treats Option the same as Alt. This means you
#: cannot use this option to configure different kitty shortcuts for
#: Option+Key vs. Alt+Key. Also, any kitty shortcuts using
#: Option/Alt+Key will take priority, so that any such key presses
#: will not be passed to terminal programs running inside kitty.
#: Changing this option by reloading the config is not supported.
# macos_hide_from_tasks no
#: Hide the kitty window from running tasks on macOS (⌘+Tab and the
#: Dock). Changing this option by reloading the config is not
#: supported.
# macos_quit_when_last_window_closed no
#: Have kitty quit when all the top-level windows are closed on macOS.
#: By default, kitty will stay running, even with no open windows, as
#: is the expected behavior on macOS.
# macos_window_resizable yes
#: Disable this if you want kitty top-level OS windows to not be
#: resizable on macOS.
# macos_thicken_font 0
#: Draw an extra border around the font with the given width, to
#: increase legibility at small font sizes on macOS. For example, a
#: value of 0.75 will result in rendering that looks similar to sub-
#: pixel antialiasing at common font sizes. Note that in modern kitty,
#: this option is obsolete (although still supported). Consider using
#: text_composition_strategy instead.
# macos_traditional_fullscreen no
#: Use the macOS traditional full-screen transition, that is faster,
#: but less pretty.
# macos_show_window_title_in all
#: Control where the window title is displayed on macOS. A value of
#: window will show the title of the currently active window at the
#: top of the macOS window. A value of menubar will show the title of
#: the currently active window in the macOS global menu bar, making
#: use of otherwise wasted space. A value of all will show the title
#: in both places, and none hides the title. See
#: macos_menubar_title_max_length for how to control the length of the
#: title in the menu bar.
# macos_menubar_title_max_length 0
#: The maximum number of characters from the window title to show in
#: the macOS global menu bar. Values less than one means that there is
#: no maximum limit.
# macos_custom_beam_cursor no
#: Use a custom mouse cursor for macOS that is easier to see on both
#: light and dark backgrounds. Nowadays, the default macOS cursor
#: already comes with a white border. WARNING: this might make your
#: mouse cursor invisible on dual GPU machines. Changing this option
#: by reloading the config is not supported.
# macos_colorspace srgb
#: The colorspace in which to interpret terminal colors. The default
#: of srgb will cause colors to match those seen in web browsers. The
#: value of default will use whatever the native colorspace of the
#: display is. The value of displayp3 will use Apple's special
#: snowflake display P3 color space, which will result in over
#: saturated (brighter) colors with some color shift. Reloading
#: configuration will change this value only for newly created OS
#: windows.
# linux_display_server auto
#: Choose between Wayland and X11 backends. By default, an appropriate
#: backend based on the system state is chosen automatically. Set it
#: to x11 or wayland to force the choice. Changing this option by
#: reloading the config is not supported.
#: }}}
#: Keyboard shortcuts {{{
#: Keys are identified simply by their lowercase Unicode characters.
#: For example: a for the A key, [ for the left square bracket key,
#: etc. For functional keys, such as Enter or Escape, the names are
#: present at Functional key definitions
#: <https://sw.kovidgoyal.net/kitty/keyboard-protocol/#functional>.
#: For modifier keys, the names are ctrl (control, ⌃), shift (⇧), alt
#: (opt, option, ⌥), super (cmd, command, ⌘). See also: GLFW mods
#: <https://www.glfw.org/docs/latest/group__mods.html>
#: On Linux you can also use XKB key names to bind keys that are not
#: supported by GLFW. See XKB keys
#: <https://github.com/xkbcommon/libxkbcommon/blob/master/include/xkbcommon/xkbcommon-
#: keysyms.h> for a list of key names. The name to use is the part
#: after the XKB_KEY_ prefix. Note that you can only use an XKB key
#: name for keys that are not known as GLFW keys.
#: Finally, you can use raw system key codes to map keys, again only
#: for keys that are not known as GLFW keys. To see the system key
#: code for a key, start kitty with the kitty --debug-input option,
#: kitty will output some debug text for every key event. In that text
#: look for native_code, the value of that becomes the key name in the
#: shortcut. For example:
#: .. code-block:: none
#: on_key_input: glfw key: 0x61 native_code: 0x61 action: PRESS mods: none text: 'a'
#: Here, the key name for the A key is 0x61 and you can use it with::
#: map ctrl+0x61 something
#: to map Ctrl+A to something.
#: You can use the special action no_op to unmap a keyboard shortcut
#: that is assigned in the default configuration::
#: map kitty_mod+space no_op
#: If you would like kitty to completely ignore a key event, not even
#: sending it to the program running in the terminal, map it to
#: discard_event::
#: map kitty_mod+f1 discard_event
#: You can combine multiple actions to be triggered by a single
#: shortcut with combine action, using the syntax below::
#: map key combine <separator> action1 <separator> action2 <separator> action3 ...
#: For example::
#: map kitty_mod+e combine : new_window : next_layout
#: This will create a new window and switch to the next available
#: layout.
#: You can use multi-key shortcuts with the syntax shown below::
#: map key1>key2>key3 action
#: For example::
#: map ctrl+f>2 set_font_size 20
#: The full list of actions that can be mapped to key presses is
#: available here <https://sw.kovidgoyal.net/kitty/actions/>.
# kitty_mod ctrl+shift
#: Special modifier key alias for default shortcuts. You can change
#: the value of this option to alter all default shortcuts that use
#: kitty_mod.
# clear_all_shortcuts no
#: Remove all shortcut definitions up to this point. Useful, for
#: instance, to remove the default shortcuts.
# action_alias
#: E.g. action_alias launch_tab launch --type=tab --cwd=current
#: Define action aliases to avoid repeating the same options in
#: multiple mappings. Aliases can be defined for any action and will
#: be expanded recursively. For example, the above alias allows you to
#: create mappings to launch a new tab in the current working
#: directory without duplication::
#: map f1 launch_tab vim
#: map f2 launch_tab emacs
#: Similarly, to alias kitten invocation::
#: action_alias hints kitten hints --hints-offset=0
# kitten_alias
#: E.g. kitten_alias hints hints --hints-offset=0
#: Like action_alias above, but specifically for kittens. Generally,
#: prefer to use action_alias. This option is a legacy version,
#: present for backwards compatibility. It causes all invocations of
#: the aliased kitten to be substituted. So the example above will
#: cause all invocations of the hints kitten to have the --hints-
#: offset=0 option applied.
#: Clipboard {{{
#: Copy to clipboard
# map kitty_mod+c copy_to_clipboard
# map cmd+c copy_to_clipboard
#:: There is also a copy_or_interrupt action that can be optionally
#:: mapped to Ctrl+C. It will copy only if there is a selection and
#:: send an interrupt otherwise. Similarly,
#:: copy_and_clear_or_interrupt will copy and clear the selection or
#:: send an interrupt if there is no selection.
#: Paste from clipboard
# map kitty_mod+v paste_from_clipboard
# map cmd+v paste_from_clipboard
#: Paste from selection
# map kitty_mod+s paste_from_selection
# map shift+insert paste_from_selection
#: Pass selection to program
# map kitty_mod+o pass_selection_to_program
#:: You can also pass the contents of the current selection to any
#:: program with pass_selection_to_program. By default, the system's
#:: open program is used, but you can specify your own, the selection
#:: will be passed as a command line argument to the program. For
#:: example::
#:: map kitty_mod+o pass_selection_to_program firefox
#:: You can pass the current selection to a terminal program running
#:: in a new kitty window, by using the @selection placeholder::
#:: map kitty_mod+y new_window less @selection
#: }}}
#: Scrolling {{{
#: Scroll line up
# map kitty_mod+up scroll_line_up
# map kitty_mod+k scroll_line_up
# map opt+cmd+page_up scroll_line_up
# map cmd+up scroll_line_up
#: Scroll line down
# map kitty_mod+down scroll_line_down
# map kitty_mod+j scroll_line_down
# map opt+cmd+page_down scroll_line_down
# map cmd+down scroll_line_down
#: Scroll page up
# map kitty_mod+page_up scroll_page_up
# map cmd+page_up scroll_page_up
#: Scroll page down
# map kitty_mod+page_down scroll_page_down
# map cmd+page_down scroll_page_down
#: Scroll to top
# map kitty_mod+home scroll_home
# map cmd+home scroll_home
#: Scroll to bottom
# map kitty_mod+end scroll_end
# map cmd+end scroll_end
#: Scroll to previous shell prompt
# map kitty_mod+z scroll_to_prompt -1
#:: Use a parameter of 0 for scroll_to_prompt to scroll to the last
#:: jumped to or the last clicked position. Requires shell
#:: integration <https://sw.kovidgoyal.net/kitty/shell-integration/>
#:: to work.
#: Scroll to next shell prompt
# map kitty_mod+x scroll_to_prompt 1
#: Browse scrollback buffer in pager
# map kitty_mod+h show_scrollback
#:: You can pipe the contents of the current screen and history
#:: buffer as STDIN to an arbitrary program using launch --stdin-
#:: source. For example, the following opens the scrollback buffer in
#:: less in an overlay window::
#:: map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R
#:: For more details on piping screen and buffer contents to external
#:: programs, see launch <https://sw.kovidgoyal.net/kitty/launch/>.
#: Browse output of the last shell command in pager
# map kitty_mod+g show_last_command_output
#:: You can also define additional shortcuts to get the command
#:: output. For example, to get the first command output on screen::
#:: map f1 show_first_command_output_on_screen
#:: To get the command output that was last accessed by a keyboard
#:: action or mouse action::
#:: map f1 show_last_visited_command_output
#:: You can pipe the output of the last command run in the shell
#:: using the launch action. For example, the following opens the
#:: output in less in an overlay window::
#:: map f1 launch --stdin-source=@last_cmd_output --stdin-add-formatting --type=overlay less +G -R
#:: To get the output of the first command on the screen, use
#:: @first_cmd_output_on_screen. To get the output of the last jumped
#:: to command, use @last_visited_cmd_output.
#:: Requires shell integration
#:: <https://sw.kovidgoyal.net/kitty/shell-integration/> to work.
#: }}}
#: Window management {{{
#: New window
# map kitty_mod+enter new_window
# map cmd+enter new_window
#:: You can open a new kitty window running an arbitrary program, for
#:: example::
#:: map kitty_mod+y launch mutt
#:: You can open a new window with the current working directory set
#:: to the working directory of the current window using::
#:: map ctrl+alt+enter launch --cwd=current
#:: You can open a new window that is allowed to control kitty via
#:: the kitty remote control facility with launch --allow-remote-
#:: control. Any programs running in that window will be allowed to
#:: control kitty. For example::
#:: map ctrl+enter launch --allow-remote-control some_program
#:: You can open a new window next to the currently active window or
#:: as the first window, with::
#:: map ctrl+n launch --location=neighbor
#:: map ctrl+f launch --location=first
#:: For more details, see launch
#:: <https://sw.kovidgoyal.net/kitty/launch/>.
#: New OS window
# map kitty_mod+n new_os_window
# map cmd+n new_os_window
#:: Works like new_window above, except that it opens a top-level OS
#:: window. In particular you can use new_os_window_with_cwd to open
#:: a window with the current working directory.
#: Close window
# map kitty_mod+w close_window
# map shift+cmd+d close_window
#: Next window
# map kitty_mod+] next_window
#: Previous window
# map kitty_mod+[ previous_window
#: Move window forward
# map kitty_mod+f move_window_forward
#: Move window backward
# map kitty_mod+b move_window_backward
#: Move window to top
# map kitty_mod+` move_window_to_top
#: Start resizing window
# map kitty_mod+r start_resizing_window
# map cmd+r start_resizing_window
#: First window
# map kitty_mod+1 first_window
# map cmd+1 first_window
#: Second window
# map kitty_mod+2 second_window
# map cmd+2 second_window
#: Third window
# map kitty_mod+3 third_window
# map cmd+3 third_window
#: Fourth window
# map kitty_mod+4 fourth_window
# map cmd+4 fourth_window
#: Fifth window
# map kitty_mod+5 fifth_window
# map cmd+5 fifth_window
#: Sixth window
# map kitty_mod+6 sixth_window
# map cmd+6 sixth_window
#: Seventh window
# map kitty_mod+7 seventh_window
# map cmd+7 seventh_window
#: Eighth window
# map kitty_mod+8 eighth_window
# map cmd+8 eighth_window
#: Ninth window
# map kitty_mod+9 ninth_window
# map cmd+9 ninth_window
#: Tenth window
# map kitty_mod+0 tenth_window
#: Visually select and focus window
# map kitty_mod+f7 focus_visible_window
#:: Display overlay numbers and alphabets on the window, and switch
#:: the focus to the window when you press the key. When there are
#:: only two windows, the focus will be switched directly without
#:: displaying the overlay. You can change the overlay characters and
#:: their order with option visual_window_select_characters.
#: Visually swap window with another
# map kitty_mod+f8 swap_with_window
#:: Works like focus_visible_window above, but swaps the window.
#: }}}
#: Tab management {{{
#: Next tab
# map kitty_mod+right next_tab
# map shift+cmd+] next_tab
# map ctrl+tab next_tab
#: Previous tab
# map kitty_mod+left previous_tab
# map shift+cmd+[ previous_tab
# map ctrl+shift+tab previous_tab
#: New tab
# map kitty_mod+t new_tab
# map cmd+t new_tab
#: Close tab
# map kitty_mod+q close_tab
# map cmd+w close_tab
#: Close OS window
# map shift+cmd+w close_os_window
#: Move tab forward
# map kitty_mod+. move_tab_forward
#: Move tab backward
# map kitty_mod+, move_tab_backward
#: Set tab title
# map kitty_mod+alt+t set_tab_title
# map shift+cmd+i set_tab_title
#: You can also create shortcuts to go to specific tabs, with 1 being
#: the first tab, 2 the second tab and -1 being the previously active
#: tab, and any number larger than the last tab being the last tab::
#: map ctrl+alt+1 goto_tab 1
#: map ctrl+alt+2 goto_tab 2
#: Just as with new_window above, you can also pass the name of
#: arbitrary commands to run when using new_tab and new_tab_with_cwd.
#: Finally, if you want the new tab to open next to the current tab
#: rather than at the end of the tabs list, use::
#: map ctrl+t new_tab !neighbor [optional cmd to run]
#: }}}
#: Layout management {{{
#: Next layout
# map kitty_mod+l next_layout
#: You can also create shortcuts to switch to specific layouts::
#: map ctrl+alt+t goto_layout tall
#: map ctrl+alt+s goto_layout stack
#: Similarly, to switch back to the previous layout::
#: map ctrl+alt+p last_used_layout
#: There is also a toggle_layout action that switches to the named
#: layout or back to the previous layout if in the named layout.
#: Useful to temporarily "zoom" the active window by switching to the
#: stack layout::
#: map ctrl+alt+z toggle_layout stack
#: }}}
#: Font sizes {{{
#: You can change the font size for all top-level kitty OS windows at
#: a time or only the current one.
#: Increase font size
# map kitty_mod+equal change_font_size all +2.0
# map kitty_mod+plus change_font_size all +2.0
# map kitty_mod+kp_add change_font_size all +2.0
# map cmd+plus change_font_size all +2.0
# map cmd+equal change_font_size all +2.0
# map shift+cmd+equal change_font_size all +2.0
#: Decrease font size
# map kitty_mod+minus change_font_size all -2.0
# map kitty_mod+kp_subtract change_font_size all -2.0
# map cmd+minus change_font_size all -2.0
# map shift+cmd+minus change_font_size all -2.0
#: Reset font size
# map kitty_mod+backspace change_font_size all 0
# map cmd+0 change_font_size all 0
#: To setup shortcuts for specific font sizes::
#: map kitty_mod+f6 change_font_size all 10.0
#: To setup shortcuts to change only the current OS window's font
#: size::
#: map kitty_mod+f6 change_font_size current 10.0
#: }}}
#: Select and act on visible text {{{
#: Use the hints kitten to select text and either pass it to an
#: external program or insert it into the terminal or copy it to the
#: clipboard.
#: Open URL
# map kitty_mod+e open_url_with_hints
#:: Open a currently visible URL using the keyboard. The program used
#:: to open the URL is specified in open_url_with.
#: Insert selected path
# map kitty_mod+p>f kitten hints --type path --program -
#:: Select a path/filename and insert it into the terminal. Useful,
#:: for instance to run git commands on a filename output from a
#:: previous git command.
#: Open selected path
# map kitty_mod+p>shift+f kitten hints --type path
#:: Select a path/filename and open it with the default open program.
#: Insert selected line
# map kitty_mod+p>l kitten hints --type line --program -
#:: Select a line of text and insert it into the terminal. Useful for
#:: the output of things like: `ls -1`.
#: Insert selected word
# map kitty_mod+p>w kitten hints --type word --program -
#:: Select words and insert into terminal.
#: Insert selected hash
# map kitty_mod+p>h kitten hints --type hash --program -
#:: Select something that looks like a hash and insert it into the
#:: terminal. Useful with git, which uses SHA1 hashes to identify
#:: commits.
#: Open the selected file at the selected line
# map kitty_mod+p>n kitten hints --type linenum
#:: Select something that looks like filename:linenum and open it in
#:: vim at the specified line number.
#: Open the selected hyperlink
# map kitty_mod+p>y kitten hints --type hyperlink
#:: Select a hyperlink (i.e. a URL that has been marked as such by
#:: the terminal program, for example, by `ls --hyperlink=auto`).
#: The hints kitten has many more modes of operation that you can map
#: to different shortcuts. For a full description see hints kitten
#: <https://sw.kovidgoyal.net/kitty/kittens/hints/>.
#: }}}
#: Miscellaneous {{{
#: Show documentation
# map kitty_mod+f1 show_kitty_doc overview
#: Toggle fullscreen
# map kitty_mod+f11 toggle_fullscreen
# map ctrl+cmd+f toggle_fullscreen
#: Toggle maximized
# map kitty_mod+f10 toggle_maximized
#: Toggle macOS secure keyboard entry
# map opt+cmd+s toggle_macos_secure_keyboard_entry
#: Unicode input
# map kitty_mod+u kitten unicode_input
# map ctrl+cmd+space kitten unicode_input
#: Edit config file
# map kitty_mod+f2 edit_config_file
# map cmd+, edit_config_file
#: Open the kitty command shell
# map kitty_mod+escape kitty_shell window
#:: Open the kitty shell in a new window / tab / overlay / os_window
#:: to control kitty using commands.
#: Increase background opacity
# map kitty_mod+a>m set_background_opacity +0.1
#: Decrease background opacity
# map kitty_mod+a>l set_background_opacity -0.1
#: Make background fully opaque
# map kitty_mod+a>1 set_background_opacity 1
#: Reset background opacity
# map kitty_mod+a>d set_background_opacity default
#: Reset the terminal
# map kitty_mod+delete clear_terminal reset active
# map opt+cmd+r clear_terminal reset active
#:: You can create shortcuts to clear/reset the terminal. For
#:: example::
#:: # Reset the terminal
#:: map f1 clear_terminal reset active
#:: # Clear the terminal screen by erasing all contents
#:: map f1 clear_terminal clear active
#:: # Clear the terminal scrollback by erasing it
#:: map f1 clear_terminal scrollback active
#:: # Scroll the contents of the screen into the scrollback
#:: map f1 clear_terminal scroll active
#:: # Clear everything up to the line with the cursor
#:: map f1 clear_terminal to_cursor active
#:: If you want to operate on all kitty windows instead of just the
#:: current one, use all instead of active.
#:: Some useful functions that can be defined in the shell rc files
#:: to perform various kinds of clearing of the current window:
#:: .. code-block:: sh
#:: clear-only-screen() {
#:: printf "\e[H\e[2J"
#:: }
#:: clear-screen-and-scrollback() {
#:: printf "\e[H\e[3J"
#:: }
#:: clear-screen-saving-contents-in-scrollback() {
#:: printf "\e[H\e[22J"
#:: }
#:: For instance, using these escape codes, it is possible to remap
#:: Ctrl+L to both scroll the current screen contents into the
#:: scrollback buffer and clear the screen, instead of just clearing
#:: the screen. For ZSH, in ~/.zshrc, add:
#:: .. code-block:: zsh
#:: ctrl_l() {
#:: builtin print -rn -- $'\r\e[0J\e[H\e[22J' >"$TTY"
#:: builtin zle .reset-prompt
#:: builtin zle -R
#:: }
#:: zle -N ctrl_l
#:: bindkey '^l' ctrl_l
#: Clear up to cursor line
# map cmd+k clear_terminal to_cursor active
#: Reload kitty.conf
# map kitty_mod+f5 load_config_file
# map ctrl+cmd+, load_config_file
#:: Reload kitty.conf, applying any changes since the last time it
#:: was loaded. Note that a handful of options cannot be dynamically
#:: changed and require a full restart of kitty. Particularly, when
#:: changing shortcuts for actions located on the macOS global menu
#:: bar, a full restart is needed. You can also map a keybinding to
#:: load a different config file, for example::
#:: map f5 load_config /path/to/alternative/kitty.conf
#:: Note that all options from the original kitty.conf are discarded,
#:: in other words the new configuration *replace* the old ones.
#: Debug kitty configuration
# map kitty_mod+f6 debug_config
# map opt+cmd+, debug_config
#:: Show details about exactly what configuration kitty is running
#:: with and its host environment. Useful for debugging issues.
#: Send arbitrary text on key presses
#:: E.g. map ctrl+shift+alt+h send_text all Hello World
#:: You can tell kitty to send arbitrary (UTF-8) encoded text to the
#:: client program when pressing specified shortcut keys. For
#:: example::
#:: map ctrl+alt+a send_text all Special text
#:: This will send "Special text" when you press the Ctrl+Alt+A key
#:: combination. The text to be sent decodes ANSI C escapes
#:: <https://www.gnu.org/software/bash/manual/html_node/ANSI_002dC-
#:: Quoting.html> so you can use escapes like \e to send control
#:: codes or \u21fb to send Unicode characters (or you can just input
#:: the Unicode characters directly as UTF-8 text). You can use
#:: `kitten show_key` to get the key escape codes you want to
#:: emulate.
#:: The first argument to send_text is the keyboard modes in which to
#:: activate the shortcut. The possible values are normal,
#:: application, kitty or a comma separated combination of them. The
#:: modes normal and application refer to the DECCKM cursor key mode
#:: for terminals, and kitty refers to the kitty extended keyboard
#:: protocol. The special value all means all of them.
#:: Some more examples::
#:: # Output a word and move the cursor to the start of the line (like typing and pressing Home)
#:: map ctrl+alt+a send_text normal Word\e[H
#:: map ctrl+alt+a send_text application Word\eOH
#:: # Run a command at a shell prompt (like typing the command and pressing Enter)
#:: map ctrl+alt+a send_text normal,application some command with arguments\r
#: Open kitty Website
# map shift+cmd+/ open_url https://sw.kovidgoyal.net/kitty/
#: Hide macOS kitty application
# map cmd+h hide_macos_app
#: Hide macOS other applications
# map opt+cmd+h hide_macos_other_apps
#: Minimize macOS window
# map cmd+m minimize_macos_window
#: Quit kitty
# map cmd+q quit
#: }}}
#: }}}
# BEGIN_KITTY_THEME
# Jellybeans
include current-theme.conf
# END_KITTY_THEME